• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.3
• /
• pp.297-305
• /
• 2005

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver. a variable-speed pump. a mass flow meter. a pre-heater and evaporator (test section). The test section consists of a smooth. horizontal stainless steel tube of 7.75 mm inner diameter. The experiments were conducted at mass flux of 200 to $500\;kg/m^{2}s$. saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$. and heat flux of 10 to $40\;kW/m^2$. The test results showed the evaporation heat transfer of $CO_2$ has greatly effect on more nucleate boiling than convective boiling. The evaporation heat transfer coefficients of $CO_2$ are highly dependent on the vapor quality. heat flux and saturation temperature. The evaporation heat transfer coefficient of $CO_2$ is very larger than that of R-22 and R-134a. In making a comparison between test results and existing correlations. the present experimental data are the best fit for the correlation of Jung et al. But it was failed to predict the evaporation heat transfer coefficient of $CO_2$ using by the existing correlation. Therefore. it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.25-36
• /
• 1998

Explosion and fires can occur in all segments of chemical and petroleum industries because of complexity of process, usage and storage of flammable and reactive chemicals, and operating conditions of high pressure and temperatures. Especially chemical plants have high possibility of the occurrence of BLEVE(Boiling Liquid Expanding Vapor Explosion)and Fireball. In this study, a computer program was developed for the effect assessment of BLEVE and Fireball. BLEVE was analysed by three explosion models of physical explosion model, isothermal expansion model and adiabatic expansion model and Fireball using solid model. The parametric sensitivity analysis has been done for the models of BLEVE and Fireball. The damage by BLEVE and Fireball of Benzene and Toluene and m-Xylene were estimated.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.4
• /
• pp.15-23
• /
• 2002

In most cryogenic liquid rocket engines, liquid oxygen manifold and injector are not thermally insulated from room temperature environment fur reducing system complexity and the weight. This feature of cryogenic liquid rocket engine results in the situation that cryogenic liquid oxygen flow is easy to be vaporized especially in the vicinity of the manifold and the injector wall. The research in this paper is focused on two-phase flow phenomena of liquid oxygen in rocket engine. Vapor fraction was estimated by comparing the measured two-phase flow pressure drop in engine manifold and the injector with ideal single phase pressure drop. Heat flux into cryogenic flow is estimated by measuring the wall temperature on the engine manifold to examine boiling characteristics. Suitable correlations for cryogenic two-phase flow were also reviewed to see their applicability. In addition, the effect of vapor generation in liquid rocket engine manifold and injector on engine performance and stability was considered.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.4
• /
• pp.167-174
• /
• 2005

The evaporation heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth horizontal stainless steel tube of 7.75 mm inner diameter. The experiments were conducted at mass flux of 200 to $500kg/m^2s$, saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the evaporation heat transfer of $CO_2$ has greater effect on nucleate boiling than convective boiling. The evaporation heat transfer coefficient of $CO_2$ is highly dependent on the vapor quality, heat flux and saturation temperature. The evaporation heat transfer coefficient of $CO_2$ is very larger than that of R-22 and R-134a. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Jung et al. But the existing correlations failed to predict the evaporation heat transfer coefficient of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation heat transfer coefficient of $CO_2$ in a horizontal tube.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.45-50
• /
• 2021

As the difficulty of flip chip products increases, there is a growing interest in the material of flux, which is safe from the solder wetting and reliability. In the case of no clean flux, there is merit in terms of process efficiency because there is no cleaning process. But Cu migration and delamination can be occurred if the residue remains after the reflow process. In this study, major element materials, solvent and activator, are changed and confirmed effect of non-wet and reliability in the package environment. Stability of materials were secured through storage stability evaluation, and we found out non-wet zero materials through the application of two types of solvent and activator with different boiling point and the increase of activator content. After reliability test, no delamination was found in the plane analysis, which secured the final composition of low residue flux.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1676-1685
• /
• 2021

We develop a new high-fidelity multiphysics model to simulate boron chemistry in the porous Chalk River Unidentified Deposit (CRUD) deposits. Heat transfer, capillary flow, solute transport, and chemical reactions are fully coupled. The evaporation of coolant in the deposits is included in governing equations modified by the volume-averaged assumption of wick boiling. The axial offset anomaly (AOA) of the Seabrook nuclear power plant is simulated. The new model reasonably predicts the distributions of temperature, pressure, velocity, volumetric boiling heat density, and chemical concentrations. In the thicker CRUD regions, 60% of the total heat is removed by evaporative heat transfer, causing boron species accumulation. The new model successfully shows the quantitative effect of coolant evaporation on the local distributions of boron. The total amount of boron in the CRUD layer increases by a factor of 1.21 when an evaporation-driven increase of soluble and precipitated boron concentrations is reflected. In addition, the concentrations of B(OH)₃ and LiBO₂ are estimated according to various conditions such as different CRUD thickness and porosity. At the end of the cycle in the AOA case, the total mass of boron incorporated in CRUD deposits of a reference single fuel rod is estimated to be about 0.5 mg.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4798-4808
• /
• 2022

The porous corrosion deposits (known as CRUD) adhered to the cladding have an important effect on the heat transfer from fuel rods to coolant in PWRs. The vapor film is the main constituent in the two-phase film boiling model. This paper presents a vapor film thickness correlation, associated with CRUD porosity, CRUD chimney density, CRUD particle size, CRUD thickness and heat flux. The dependences of the vapor film thickness on the various influential factors can be intuitively reflected from this vapor film thickness correlation. The temperature, pressure, and boric acid concentration distributions in CRUD can be well predicted using the two-phase film boiling model coupled with the vapor film thickness correlation. It suggests that the vapor thickness correlation can estimate the vapor film thickness more conveniently than the previously reported vapor thickness calculation methods.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.4
• /
• pp.366-375
• /
• 2009

This study examined the changes of side dishes in "Eumsikdimibang", "Gyuhapchongseo", "Chosunmusangsinsikyorijebub" over time. As food ingredients, seaweed, red pepper, salted fish, Korean hot pepper paste have been used in "Gyuhapchongseo". The use of cattle by parts, saltwater fish, Chinese cabbage, powdered red pepper, garlic have increased in"Chosunmusangsinsikyorijebub". Cooking techniques, such as the use of wheat flour, a double boiler by the use of steam, and boiling and then roasting cuisine were mostly used in"Eumsikdimibang", but reduced in"Gyuhapchongseo". In "Gyuhapchongseo", the cooking methods are primarily aimed at a positive visual effect, and slices of dried meat seasoned with spices have increased. In"Chosunmusangsinsikyorijebub", various Tang (Guk), the taste of food changed by controlling the gravy content (Gigimi, Chigye, Chorim), meat mixing oil, vegetable and mushroom together to cook and boiling down the main food ingredients to soak the seasoning were increased. Dog-meat steamed dish using the intestine of dog in "Eumsikdimibang" was changed to small intestine of cattle steamed dish in "Gyuhapchongseo". And seasoned dog meat with choncho in "Eumsikdimibang" influenced on beef tail soup with Korean hot pepper paste in "Gyuhapchongseo", and Yookgyejang soup using Korean hot pepper paste in"Chosunmusangsinsikyorijebub". In steamed young chicken, the stuffing such as soybean paste, choncho, welsh onion, leek and flour in "Eumsikdimibang" was changed to minced beef, welsh onion, dropwort and Shiitake mushroom in"Gyuhapchongseo". The steamed young chicken in "Chosunmusangsinsikyorijebub" with stuffing was added to chicken soup using glutinous rice, and ginseng powder. Now, the chicken soup was changed to Samgyetang with glutinous rice, and ginseng. In "Chosunmusangsinsikyorijebub", various vegetable dishes were cooked with beef.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1523_1524
• /
• 2009

Inkjet technology has various merits as a direct patterning process in plenty of industrial applications, but critical issue such as coffee ring effect should be overcome for the application to an industrial manufacturing process. In this paper, we introduced the morphological analysis of inkjet printed pattrerns on the characristics of inks and substrates. In case of Triethlene Glycol Monoethly Ether based ink, the coffee ring effect was observed. However, an ethanol based ink showed the round shaped morphology under the same printing conditions and surface conditions. An ink consisted of the solvent with high boiling point results in coffee ring effect. This experimental results showed that the morphological change of the printed droplet is caused by the main solvent of ink, rather than the metal content, viscosity and surface tension.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.5 no.1
• /
• pp.119-136
• /
• 1999

Anti-cancer medi-alcohols in oriental herb prescriptions were divided by chef effects. Each medi-alcohols were analyzed and studied abut frequency, character, target, effect. Also, they were divided into the method of making medi-alcohols. The results were summerized as follows. 1. The department of using medi-alcohol in anticancer herbal scriptions were limited in gynecology, dermatology and digestive internal medicine. There were a lot in gynecology. 2. In analysis about medi-alcohols of dermato scriptions by chef effect, the herbs of relieving exterior syndrome were a lot first and the herbs of invigorating-qi were second. 3. In analysis about meld-alcohols of dermato scripions by chef effect, the herbs of promoting blood circulation to remove blood stasis were a lot first and the herbs of invigorating-qi were second. 4. The method of making medi-alcohol was divided into four types ; boiling, making up pills, extration, filtration. I hope that the medi-alcohol will be used as practional references.