• 제목/요약/키워드: body-space

검색결과 1,640건 처리시간 0.029초

인간의 자세조절 메커니즘에 대한 연구 (A Review on the Mechanism of Human Postural Control)

  • 이동우
    • 한국운동역학회지
    • /
    • 제15권1호
    • /
    • pp.45-61
    • /
    • 2005
  • Stance is defined as any state in which the total mass of the body is supported by the feet. In order to maintain stance, the sum of gravito-inertial forces acting on the body must be registered by equal and opposite forces at the region of contact between the organism and the support surface. Balance is controlled by applying forces to the surface of support so as to maintain the body's center of mass vertically above the feet. for a muIti-segment organism, there can be a variety of ways in which balance can be controlled, since movements of different body segments can have similar effects on the control of balance. In general, the organism tends to have a body configuration that is aligned with gravito-inertial force when there are no external forces acting on it. If any segments of the body are not aligned with gravito-inertial force vector, a torque on that segment would tend to move the body's center of mass. The maintenance of postural stability is accomplished in humans by a complex neural control system. This requires organizing integrating and acting upon visual, vestibular, and somatosensory input, providing orientation information to the postural control system. The information necessary to control and coordinate movement is provided by the visual sense of eye position with respect to the surrounding surface layout, the vestibular sense of head orientation in the gravito-inertial space, and the somatic sense of body segment position relative to one another and to the support surface. In this study, perception and action capability was examined from various points of view. The underlying assumption of the study was that the change of postural configuration could be effected by organism, environment and task goal.

현대 패션 주얼리 디자인에 나타난 '경계 흐려짐' 현상 - 복식 및 신체와의 관계를 중심으로 - (A Study on the Blurring of Boundary Reflected in Contemporary Fashion Jewelry Design -Focused on the relationship between fashion jewelry and costume or fashion jewelry and body-)

  • 황유정;최정화
    • 한국의류산업학회지
    • /
    • 제17권1호
    • /
    • pp.11-21
    • /
    • 2015
  • This study analyzed the expressive phenomenon of a blurred boundary in fashion jewelry focused on the relationship between fashion jewelry and costume or fashion jewelry and body. The method of this study was to analyze recent documentaries about jewelry theories in regards to 607 cases of fashion jewelry design in fashion books, fashion magazines, fashion internet sites from 2000 to 2014. The results were: First, phenomenon of blurred boundary between fashion jewelry and costume was expressed in a see-through wear form made of luxury material (gold and diamond) or paste material, a similar form (like fashion accessories made of crystal, bids, and gold chain), an integration of fashion accessories and jewelry, and an attached jewelry on fashion accessories. It reflected a rearrangement of conventional relationships, a blurred relation of function and meaning, dissolution of jewelry form stereotypes, jewelry styling, a harmony of function and decoration, and an alteration to the central role of a fashion image. Second, the phenomenon of a blurred boundary between fashion jewelry and body was expressed in a body organ wrapping, body surface adhesion and sculptural jewelry based on body pose. It reflected a separation from conventional space of jewelry expression, a realization of mystery and fantastic, an expression of new body surface and a blurred boundaries of fashion jewelry and body art. Aesthetic characteristics were analyzed into metaphor and integration by separation from the conventional relationship of fashion jewelry and costume or fashion jewelry and body.

우주개발동향과 주요 이슈 (Trend of Space Development and Issue)

  • 조홍제;신용도
    • 항공우주정책ㆍ법학회지
    • /
    • 제29권1호
    • /
    • pp.97-126
    • /
    • 2014
  • October 4, 1957 the Soviet Sputnik 1 was launched into space the first time in the history of mankind. After launching, the realm of humankind was expanded to space. Today all countries of the world wage a fierce competition in order to utilize space for various purposes. World powers of space such as United States, Russia, China, and Japan, put reconnaissance satellites and ocean surveillance satellites into orbit, being able to easily see equipment and troops movement on earth. Each country makes efforts to occupy space assets through the militarization of space and expand national interests. Recently private companies or individuals involved in commercial space activities are becoming more prevalent. Thus, in addition to space activities for military purposes, commercial space activities become widespread. Individuals and private companies as well as nations are also involved in space activities. Outer space is not the monopoly of space powers such as the United States and Russia. The whole human race can benefit from free access to space, being the common heritage of mankind. In particular, outer space becomes an indispensable element of military activities and human life. Many countries are now entering space development, putting a lot of budget into new development programs. Republic of Korea also built the Narodo Space Center, starting its space development with budget and manpower. We have to find out ways to use space not only for military purposes but also for commercial space activities that can contribute to the national economy. In addition, through the joint efforts of the international community, we have to make efforts for preservation and peaceful use of space. Various issues relating to space activities and research should be studies in order to contribute to the progress of humanity. Those issues include the definition of outer space, space debris reduction and environmental conservation issues, non-bind measure cooperation - European International Code of Conduct, space law and national legislation related empowerment issues, arms control measures in space, and restrictions on the use of nuclear fuel. We also need to be involved in the discussion of those issues as one of responsible space countries. In addition, we try to find out regional cooperation schemes such as the ESA in the Europe actively. Currently in the Northeast Asia, cooperation bodies led by Japan and China respectively, are operated in the confrontational way. To avoid such confrontation, a new cooperative body needs to be established for cooperation on space exploration and information. The system to allow the exchange of satellite information for early warning of natural disasters needs to be built as well. In addition, efforts to enhance the effectiveness of the relevant international treaties on space, and fill in the blanks in international space laws should be made at the same time. To this end, we have to do a leading role in the establishment of standards such as non-binding measures (resolution) - Code of Conduct, being discussed in the UN and other organizations, and compliance with those standards. Courses in aerospace should be requires in law schools and educational institutes, and professional manpower need to be nurtured. In addition, the space-related technology and policy needs to be jointly studied among the private, public, and military groups, and the cross exchange among them should be encouraged.

Ultrastructural Changes in the Cuticle of Palaemon serrifer (Palaemonidae, Crustacea) during the Intermolt Cycle

  • Park Jeung Sook
    • Fisheries and Aquatic Sciences
    • /
    • 제2권1호
    • /
    • pp.78-84
    • /
    • 1999
  • Ultrastructural changes in the cuticle of Paleamon serrifer associated with the intermolt cycle were examined and quantified as changes in the cuticular thickness. The cuticular thickness in each zoea stage increased with time elapsed after molting. The cuticle in the premolt stage was about 1.5 and 3 times thicker than that in the postmolt and intermolt stage, respectively. The cuticle in the premolt stage, including the molting space, was more than 5 times as thick as in the postmolt stage. In addition, newly hatched larvae were individually reared in the laboratory and body length for each specimen was measured frequently until the end of zoea VI. An average increase in body length between one zoea stage and the next is about $10\%$ of the length of the previous stage. Within individual zoea stages, the premolt stage had a body length some 0.3% longer than that of the postmolt stage, indicating a growth rate of about 0.03 mm/d.

  • PDF

3D 레플리카를 이용한 여성용 밀착 상의의 패턴 전개 방법 (Development of a Fitted Bodice Pattern Using a 3D Replica of Women's Upper Body)

  • 이희란;홍경희
    • 한국의류학회지
    • /
    • 제29권7호
    • /
    • pp.1008-1017
    • /
    • 2005
  • When we develop 2D pattern from replica of human body with small pieces, it is inevitable to have some replica pieces overlapped or departed. In this study, the optimized method of 2D pattern development from the 3D replica pieces was investigated using dress-form. Among six arrangement methods, anchoring two vertexes of a replica to neighboring vertexes of a next replica induces the optimized 2D pattern by evenly distributing stress across the 3D replica pieces. Anchoring neighboring vertexes resulted in automatic widening k overlapping (W & O) the interspaces among replicas of dress-form, thereby stress was distributed more evenly than any other method. W&O arrangement method was verified to be the best by examining the 3D space distribution images between body surface and twelve experimental garments.

컴퓨터 시뮬레이션을 이용한 리니어 피더의 설계 및 분석 (Design and Analysis of a Linear Feeder using Computer Simulation)

  • 이규호;김성현;정진태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.749-753
    • /
    • 2007
  • The purpose of this study is to design of a linear feeder using a multi body dynamic program, and to analyze a dynamic motion of the feeder that can transport small mechanical parts uniformly. In order to establish the analysis model of the linear feeder, each parts of the feeder are divided into two types which the rigid and flexible body. For the dynamic simulation, RecurDyn, which is a commercial multi-body dynamic package, is used. We also consider the design parameters for optimal dynamic motion such as centroid, stiffness, and mass of the feeder system. In order to analyze the dynamic motion of a linear feeder, the displacements of the feeder are measured by several accelerometers when it is in an operating condition. After the signal data from the accelerometers are captured in the time domain, the dynamic motion in the space is visualized by using graphic computer software.

  • PDF

흰쥐 간조직에서의 비소처리 영향 및 비소 전처리 효과 (Effect of Arsenic Treatment and Pretreatment in Rat Liver Tissue)

  • 노미경;손성향;부문종;김옥용
    • Applied Microscopy
    • /
    • 제24권4호
    • /
    • pp.78-85
    • /
    • 1994
  • Sodium arsenite ($NaAsO_2$) was injected to the rat subcutaneously for the study of the acute toxicity of arsenite on hepatocytes, and the effects of pretreatment of arsenite and glutathione on the lethalty of the arsenite treated rats. Arsenite treated rat hepatocytes showed vacuolated cytosol and shrinked nuclear and expanded perinuclear space and cytoplasmic membrane whirl. Rats pretreated with BSO (L-Buthionine-SR-Sulfoximine), less survived than arsenite treated alone. It means that glutathione acts as a protecting agent against the arsenite. Subcutaneous sublethal dose (10mg/kg body weight) treatment was showed the protecting activity to lethality of lethal dose (15mg/kg body weight) treated rat. 10mg/kg body weight sublethal dose effects appeared in six hours intervals of between treatments.

  • PDF

G/T 340톤급 고속 어업지도선의 선형개발에 관한 연구 (A study on the hull form development of the G/T 340ton class high speed fishery patrol ship)

  • 이귀주;이광일
    • 한국해양공학회지
    • /
    • 제11권4호
    • /
    • pp.221-226
    • /
    • 1997
  • This study was carried out for the hull form development of G/T 340ton class high speed fishery patrol ship by Chosun University at the Circulating Water Channel cooperatively with Korea Maritime Service. Same size of 15knots class fishery patrol ship was selected as a parent form (Model number : CU-015), and modified fore and after body to be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb nose and slender fore body hull form was chosen as an initial condition. Meanwhile, to ensure the engine room space keeping high resistance-propulsion performance, U-type stern hull form was developed.

  • PDF

점진적 성형 기술을 이용한 자동차 차체 모형 제품의 제작 (Application of Incremental Sheet Metal Forming for Automotive Body-In-White Manufacturing)

  • 이승욱;누엔늑뚜안;김남규;양승한;김영석
    • 소성∙가공
    • /
    • 제20권4호
    • /
    • pp.279-283
    • /
    • 2011
  • Recently incremental sheet metal forming (ISF) has used widely in making prototypes and small-volume products in automotive industry etc. We apply the ISF to make a 1/4 sized automobile body-in-white. First, ISF tests for rectangular shaped cup have been performed to clarify the formability denoting the relationship between the component wall angle and maximum cup height of safe forming. Next, a CAD model for the automobile was designed and segmented into several components in order to accommodate the working space of the CNC machine we adopted and the formability of the sheet metal. Then, a CAM software was employed to generate the tool path for manufacturing wooden dies and all the small parts. Finally, the different parts were joined into a single component by laser welding after the ISF process. By using the ISF we successfully produced the 1/4 sized automobile body-in-white.

Aerodynamic Charasteristics of Tumbling-Rectangular-Flat Plate Under Free Flight

  • Shimizu, Kosuke;Funaki, Jiro;Hirata, Katsuya
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.353-356
    • /
    • 2004
  • When a body falls in fluid, the body often experiences autorotations, namely, various kind of rotating motions, such as tumbling, flat spin and coming. Tumbling is a rotating motion with an axis perpendicular to a falling direction. Tumbling is a very important phenomenon in aeronautical and space engineering, ballistics and meteorology. For example, when an satellite re-en-tries into the atomosphere, its body collapses into many fragments which are disperse in the wide range of field. Some fragments fall in tumbling motion. Then tumbling is useful to predict fragment's motion.(omitted)

  • PDF