• 한국패류학회지
• /
• 제27권3호
• /
• pp.191-192
• /
• 2011

Pulmonate snail, Onchidium hongkongensis from muddy flat of Muan-gun was recorded as new to the Korean molluscan fauna. Shell-less body light-gray or reddish-gray in colour, oval shaped with numerous pustules on dorsal surface usually covered with mud. Black pair of tentacles with terminal eyes. Including the new record in this study, the family Onchidiidae 2 genera and 2 species in the Korean waters.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.769-780
• /
• 2022

This paper studies the dynamic behavior of laminated composite circular cylindrical shells interacting with a fluid. The mathematical formulation of the dynamic problem for an elastic body is developed based on the variational principle of virtual displacements and the relations of linear elasticity theory. The behavior of an ideal compressible fluid is described by the potential theory, the equations of which together with boundary conditions are transformed to a weak form. The hydrodynamic pressure exerted by the fluid on the internal surface of the shell is calculated according to the linearized Bernoulli equation. The numerical implementation of the mathematical formulation has been done using the semi-analytical finite element method. The influence of the ply angle and lay-up configurations of laminated composites on the natural vibration frequencies and the hydroelastic stability boundary have been analyzed for shells with different geometrical dimensions and under different kinematic boundary conditions set at their edges. It has been found that the optimal value of the ply angle depends on the level of filling of the shell with a fluid. The obtained results support the view that by choosing the optimal configuration of the layered composite material it is possible to change upwards or downwards the frequency and mode shape, as well as the critical velocity for stability loss over a wide range.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• 한국의류학회지
• /
• 제32권9호
• /
• pp.1478-1486
• /
• 2008

The human body composed of concave and convex curvatures, and the current 3D scanning technology which involves inherent measurement errors make it difficult to extract distinct curvature plot directly. In this study, a method of extracting the clear curvature plot and its application to the cycling pants design were proposed. We have developed the ergonomic pattern from the 3D human body reflecting cycling posture. For the ergonomic design line on the 3D human body, the 3D information on the lower part of four male bodies with flexed posture was analyzed. The 3D scan data of four subjects were obtained using Cyberware. As results, the iteration of the tessellated shell was executed 100 times to obtain optimized curvature plots of the muscles on the body surface, and the boundaries of the curvature plots were applied to the design lines. Maximum(Max-pattern) and mean curvature plots(Mean-pattern) were adopted in the design line of the cycling pants, and performance of those lines was compared with that of conventional princess line(Con-pattern). The average error of total area and length in the 2D pattern developed from the 3D flexed body surface in this study were very minimal($4.58cm^2$(0.19%) and 0.15mm(0.46%)), which was within the range of tolerable limits in clothing production. The pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the cycling skin, so that the extra ease for movement and good fit was not need to be considered.

• 대한조선학회지
• /
• 제7권1호
• /
• pp.1-12
• /
• 1970

The propeller induced pressure fluctuation around a ship's stern is one of the interesting problems from viewpoints of the noise and vibration. Most of the experimental works on the subject employ pressure transducer attached on hull surface near the propeller. In the technique, the measured pressure includes the hydrodynamic pressure transducer attached, if they exit. Hence, the separation of the additional pressure due to vibration from the measured pressure is essential for the determination of true values of the propeller induced pressure. In this paper, to contribute to the separation method, the author investigated the additional hydrodynamic pressure as below, based on the numerical calculation. (1) Hydrodynamic pressure on the body surface of two dimensional cylinders of some mathematical sections such as ellipse, rectangle, Lewis form of hypotrocoidal charactor and curvilinear-element section with chines oscillating vertically at high frequency in a free surface. (2) Hydrodynamic pressure on the surface of the shell plate in local vibration in an ideal fluid.

• 한국의류학회지
• /
• 제32권12호
• /
• pp.1825-1836
• /
• 2008

3차원 인체 형상에 적합한 의복 패턴을 제작하기 위하여 인체 형상을 평면전개하여 체표패턴을 얻기 위한 다양한 연구들이 진행되고 있다. 본 연구는 Grid method를 이용한 여성 상반신 앞면의 평면전개를 위하여 최적 그리드 기준을 결정하는 것을 목적으로 하였다. Grid method는 인체 형상의 표면에 커브를 생성하고 각 커브의 길이를 플로팅하는 원리에 의하여 3차원 형상을 평면전개 방법이다. 첫째, Young 모델과 Adult 모델에 해당하는 두 개의 3차원 바디들을 사이즈코리아데이타에 기초하여 모델링하였다. 둘째, 각각의 모델을 3차원 특징점에 의하여 shell과 block으로 세분화하였다. 셋째, 각각의 block은 다양한 그리드수의 조합에 의하여 평면전개되었다. 마지막으로, 가장 효율적인 조합을 선정하여 평면전개의 기준으로 제시하였다.

• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.196-202
• /
• 2006

In this study the swimwear pattern focused on a typical middle-aged women's body was developed and discussed. To determine the characteristics of a typical middle-aged women's body, their actual bust were cast. According to a generated flattened body surface shell, the right side of pattern was designed considering stretching ratio of swimwear materials as shown in the figure 3. Special features of the developed swimwear pattern are a bust dart, a particularly designed lining, a power-net, and a brassiere-cup. Against a commercial swimwear pattern, the darts were applied to bust area considering its volume. The lining was attached on the entire right side except brassiere part, and power-net was added twice on belly and hip part. As a result, silhouette and body shape were improved. The new brassiere-cup was designed and made to satisfy the middle-aged women's demand about their bust volume. Swimwear fitting test was performed, and it was evaluated. The developed swimwear rated activity, body support, entire silhouette, pressure, comfortable fitting, suitability with body figure, nudity higher by comparison with a commercial swimwear, as shown in the Table 6. Specially the developed swimwear satisfied future customers about a bust, a hip, a waist, a belly area, which the middle-aged women are not confident. Reducing exposure of an armhole and upper leg area, it also satisfied them. New developed swimwear pattern will provide useful reference to swimwear businesses targeting middle-aged women.

• 한국가금학회지
• /
• 제27권2호
• /
• pp.115-132
• /
• 2000

본 장에서는 양질의 계란생산에 필요한 난각과 난각색의 형성에 관해서 언급하였다. 강한 난각의 형성은 난각을 이루는 내적인 요인들 (큐티클층, 진각, 난각층의 조직)과 소화기, 난각형성에 관여하는 각종 체내 분비선, 신장, 호르몬 등의 적정기능에 의하여 결정된다. 병아리가 성성숙에 달하면 골수골은 산란계가 난각의 형성이 정점에 달했을 때를 대비 할 수 있는 정도가 되어야 한다. 난각이 형성되는데 중요한 기능을 갖는 요인들로는 산란계 사료중의 칼슘원, 산란계사료 중의 칼슘과 인의 비율, 비타민 D의 적정수준, 체액중의 각종 무기물 균형, 기타 영양소 수준들을 들 수 있다. 또 생리적, 환경적인 요인들과 산란계의 나이나 산란계사의 온도와 습도, 산란계의 계통, 질병, 계사에서 알의 수집부터 수송에 이르기까지의 각종 관리형태 등은 계한이 생산자에서부터 소비자에 이르기까지 여러 단계에서 나타나는 각종 난각 파괴의 요인이 된다. 난각에 나타나는 색소에 관여되는 요인들로는 protoporphyrin-IX, biliverdin-IX, 아연 등이 함유된 킬레이트와 때로 적은 양이 관여하기는 하지만 coproporphyrin-III 등이 포함된다. 그러나 이러한 요인들이 난각색의 형성에 관여하는 데에는 산란계의 연령, 질병, 약품 첨가 여부, 난각 형성도 중 난각 표면의 손상 여부 등 여러 가지가 관여된다.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.399-407
• /
• 2002

속이 빈 축대칭 회전체인 두꺼운 쉘의 정확한 고유진동수와 모우드형상을 결정하기 위해서 3차원적인 해석방법이 사용되었다. 이 축대칭 회전쉘의 모선을 직선으로 한정하지 않았으며, 쉘의 두께 또한 일정한 것으로 제한하지 않았다. 이 쉘의 중앙면은 임의의 곡율을 가지며, 쉘의 두께도 임의적으로 변한다. 자오선방향, 두께방향, 원주방향으로의 변위 성분인$U_\Phi, U_z, U_\theta$는 시간반응의 정현성(sinusoidal)과$\theta$방향으로의 주기성을 지니며,$\Phi$와 z 방향으로는 대수다항 식의 형태로 가정되었다. 이 쉘의 변형률에너지와 운동에너지를 공식화하였으며, 진동수의 최소화를 통해 상위경계치의 진동수를 구하고 다항식의 차수를 증가시켜 엄밀해에 수렴된 진동수를 구할 수 있다. 선형적으로 두께가 변하는 두꺼운 원추형쉘과 구형쉘에 대한 예를 통하여 하위 다섯 개의 진동수에 대해서 유효 숫자 4자리까지의 정확한 수렴성연구가 이루어졌다. 이 해석 방법은 두께가 매우 두꺼운 쉘 뿐만이 아니라 얇은 쉘에도 적용이 가능하다

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.404-409
• /
• 2004

A compressor loop pipe is the most important part in a refrigerator from the view of structural vibration and noise. Vibration energy generated from a compressor's inner body is transmitted to the shell and outside through the loop pipe. For this reason it is very important to design a compressor loop pipe. But, for geometrical complexity and dynamic nonlinearity of the loop pipe, analysis and design of the loop pipe is very difficult. So the statistical and experimental methods have to be used for design of this system. The response surface method (RSM) becomes a popular meta-modeling technique f3r the complex system as this loop pipe. As starting point of loop pile's optimization, FEA model and simple experimental model are used instead of the real loop pipe model. After RS model was constructed, using sensitivity-based optimizer performed optimization for the loop pipe. And the moving least square method (MLSM) was applied to reduce the approximation error.