• International Journal of Costume and Fashion
• /
• 제5권1호
• /
• pp.1-13
• /
• 2005

Two hundreds of female aged 19 years old and up were recruited to evaluate the postural changes and bilateral variation of asymmetry over age. To find out the differences among the age group, subjects were classified into 5 groups, early young age(19-29), late young age(30-39), early middle age(40-49), late middle age(50-59), and old age(60-). 35 body measurements were taken by the 3-D body scanner which allowed us to take measurements which cannot be measured using traditional methods, including the shape of a cross section, slice area surface are, and volume. Bilateral variations were observed as a function of age; Depth of scapular point level, scapular point to center back, and blade angle. Postural change of anterior cervical angle, upper anterior thoracic angle, upper posterior thoracic angle, posterior cervical angle, and center back/center front ratio were also exhibited. In each measurements, subjects were classified into normal, and abnormal group. Percentiles of abnormal in shoulder line angle, blade angle, neck point $\∼$ acromial point $\∼$ scapular point, posterior cervical angle, and upper posterior thoracic angle were increased over age group. The upper body of lateral view was classified into 3 types of posture based on the previous research; straight, erect(leaning back), and stooped(bent forward). The percentiles of subjects who have straight postures were decreased as a function of age, but those of stooped postures were increased. Subjects who have erect postures did not so. The stooped posture group shows the big cervical fossa angle, anterior cervical angle, posterior cervical angle, upper posterior thoracic angle, and the small upper anterior thoracic angle comparing to the straight and erect posture group. These results could be apply for clothing construction reflecting the changes in back, shoulder, neck, and the bilateral asymmetry according to the target age group.

• 복식문화연구
• /
• 제19권6호
• /
• pp.1150-1162
• /
• 2011

Considering the fact that the fit for men's clothes is important for the sizing system modern ready-made pants, an analysis of obese middle-aged men is required at this period of time to determine the appropriate fit for obese men. The following research focused on 635 middle-aged obese men who had a BMI index of at least 25 and a waist circumference from the belly-button level of 34 inches or more. This research deals with the articles of circumference, thickness and other major physical changes that happen during the 30s, 40s, and 50s. According to the analysis of these body measurement articles with specific regard to age, men's height and the height of their waist seemed to decrease as their age increased. This demonstrates that as these men grow older, the waist and stomach slowly curved into a circular and flat body type due to their obesity. In this study, the first factor figure was the height and leg length. The second factor figure was the waist form. The third factor figure was the center thigh circumference. The fourth and fifth factor figures were the hip length and shape. Lastly, the sixth factor figure was the calf circumference. These 6 factor figures construct 80.57% of the volume explanation and showed 3 patterns through a cluster analysis that showed different patterns of obesity forms for waist circumferences in key figure 1, waist and thigh circumferences in key figure 2, and waist and buttocks circumferences. Therefore, it was worthwhile to consider the circumferences of the waist, buttocks and thigh according to the body type category to enhance the drafting of well-fitting pants.

• 복식
• /
• 제62권3호
• /
• pp.84-95
• /
• 2012

The purpose of this study is to provide basic data reflecting body characteristics for production of briefs by classifying lower body types of women in their 40s, 50s and 60s. The results are as follows: First, measurements for height-related items decreased while the measurements for width and depth items increased with age. However, 'hip width' and 'hip depth' items showed no significant differences among the age groups. In addition, no visible differences appeared in the length items among the age groups but 'waist to hip' and 'outside leg' lengths showed decreasing values according to age. Second, four factors were established from the factor analysis: 'obesity level around waist and abdomen', 'vertical length of the lower body', 'thickness and obesity level of lower limbs', and, 'size and shape of buttocks'. Lastly, cluster analysis resulted in the classification of the four factors mentioned above. Type 2 appeared the most, representing women in their 40s~60s. Type 1(n=257) was referred as 'slender with a short lower body', Type 2(n=443) as 'plump with short lower body', Type 3(n=224) as 'slender with long lower body', and Type 4(n=199) as 'obese around abdomen and lower limbs'.

• 복식
• /
• 제54권8호
• /
• pp.1-14
• /
• 2004

The aim of this study is to provide fundamental data on the development of ready-to-wear clothing appropriate for the lower body types of male students who play sports in college. The study was conducted by means of targeting 151 male sports majors between $18{\sim}27$ years of age. Characteristics of the respondents were ascertained by means of questionnaires and an evaluation of a total of 36 lower body features. The results of the study are as follows. 1. A comparison of anthropometric measurements with the National Anthropometric Survey of Korea (1997) revealed that the main characteristics of the lower somatotypes of male sports college students are large circumferences and developed muscles of the lower body. 2. Sports were classified into the following five categories : soccer, bodybuilding, wrestling, judo, and taekwondo. In particular, bodybuilding students demonstrated a somatotype with an increased circumference, depth, and width of the thigh and lower body. 3. Somatotypes were classified into 3 types by means of a cluster analysis employing S factors. Type 1 somatotype exhibits a large circumference in the lower body. Type 2 is a lower somatotype of a middle size. Finally, Type 3 encompasses a smaller group in weight and circumference with a developed calf and ankle. 4. Each group was evaluated using a discriminatory analysis as a check to see if the groups had been discriminated with accuracy. The total accuracy rate was 96.0%.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.329-331
• /
• 2021

최근 헬스케어 분야에서 딥러닝을 활용한 다양한 사례가 증가하면서 웨어러블 기기를 통한 심전도 검사, 체성분 분석 등의 기능을 제공하여 합리적인 의사 결정을 제공하여 개인에게 맞는 프로세스를 제공할 수 있다. 딥러닝을 활용하기 위해서는 정제된 데이터 확보가 무엇보다 중요하며 이러한 데이터는 사람의 개입이나 비지도학습 등을 통해 이뤄지고 있다. 본 논문에서는 측정하기 쉬운 가슴둘레, 허리둘레와 같은 치수 데이터를 이용해 성별과 나이에 따른 군집별 비지도학습을 진행하고 이를 CNN으로 분류하는 모델을 제안한다. 데이터는 국가기술표준원에서 제공하고 있는 제7차 인체치수데이터를 활용하였다. 이를 통해 개인 맞춤형 체형관리 서비스나 비만 분석 등 다양한 응용 사례에 적용할 수 있을 것으로 사료된다.

• Journal of Plant Biology
• /
• 제37권2호
• /
• pp.203-221
• /
• 1994

한국산 나자식물 5과 12속 19분류군을 대상으로 광학현미경, 주사전자현미경 및 투과전자현미경을 이용하여 화분의 형태를 비교 관찰하고 기재하였으며, 각 과별 검색표를 작성하였다. 분류학적으로 볼 때 취급된 나자식물의 화분립은 모양, 크기, 표면상태, 표면무늬, 기낭의 유무 및 돌기의 유무에 의해 뚜렷이 구분되어 속간 및 속 이하의 분류군에는 유용하였으나, Pinus속내의 종들은 본 연구에서 관찰된 화분립의 크기나 표면무늬에 의해서는 화분형질의 중복으로 인해 종분류는 유용하지 않은 것으로 밝혀졌다. 소나무과내의 Picea속에 속하는 P. koraiensis의 화분립은 기낭의 형태가 불규칙하고, 몸체에 비해 기낭의 크기가 크며, 표벽이 얇기 때문에 기낭을 갖는 Pinus속과 Abies속의 분류군과는 차이점이 뚜렷하다. 또한 Abies속의 특징으로 기재된 모부의 중앙부위에서 기낭쪽으로 갈수록 표벽이 얇아진다는 점, 화분림 몸체의 표면이 비교적 굴곡이 심하지 않다는 점과 화분립의 크기가 크다는 점으로 볼 때 P. koraiensis는 기낭을 갖는 Pinus속과 Abies속 중 Abies속과 화분학적으로 유연관계가 가까운 것으로 추정된다. 투과전자현미경관찰을 통해 기낭을 갖는 화분립을 조사한 결과 근극에는 내표벽과 외표벽이 모두 존재하나, 서로 분리되어 외표벽은 기낭과 연결되고 내표벽은 원극을 이룬다. 또한 구과목의 분류군들에 있어 소나무과를 제외한 주목과, 난우송과 및 측백나무와 일부 분류군의 내표벽이 여러 층으로 구성된 관상구조로 나타났다. 주사전자현미경으로 기낭을 관찰한 결과 표면무늬는 유공상이고 미세한 pit가 존재하는 것으로 관찰되었다. 기낭의 표면무늬는 광학현미경상에서 망상으로 보이나 투과전자현미경으로 관찰해 본 결과 이는 기낭내부의 망상구조가 광학현미경하에서 투시된 것으로 밝혀졌다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
• /
• pp.509-512
• /
• 2005

평생 건강한 삶을 누리기 위한 인간의 노력이 증가되면서 많은 관심을 받고 있는 것이 사상의학이다. 사상의학에서는 사람의 체질을 네 가지로 분류하여 체질에 맞는 의술을 행하였다. 따라서, 본 논문에서는 임상의의 용모사기 방법을 시각화, 계량화, 정량화하여 임상의의 직관을 객관적 기기로 개발하기 위한 방법론을 제안하고자 한다. 이를 위해 정면 얼굴과 측면 얼굴에서 사상 체질 분류에 필요한 특징 요소를 추출하고자 한다. 최종적으로 실험에 의해 제안한 방법의 유용성을 입증하고자 한다.

• 패션비즈니스
• /
• 제14권1호
• /
• pp.57-75
• /
• 2010

This study is done in Shanghai area by sample survey of female college students in their lower 20s. Through direct contact survey, this study collected and analyzed information on figure to understand feature of breasts and measurements of body to provide base information to improve product of brassiere for adult female in China. Data was analyzed by using SPSSWIN 13.0 Program and SAS 9.0. 1. From a result of factor analysis on 40 items of measures to derive the components of the shape of the breast, 6 factors were derived such as the factors to show the obesity of the bust, to show the ratio of the upper and lower area of the lower bust, droop and volume, to show the internal shape and broadness of the bust, to show the location and vertical size of the bust, to show the protrusion of the bust and the eternal shape of the bust. 2. From a result of classification on the shape of the breast of the Chinese women in their early 20s, 4 types were selected. Type 1 is the protrusion type that a woman has a broad drooped breast due to the development in the upper and lower parts of the chest as well as the highest height, a high degree of obesity in the bust part, big volume and much protrusion. Type 2 is the hemisphere type that the degree of obesity in the breast is second to Type 1 and a breast is located at a region higher than Type 1 as the degree of obesity in the breast is secondly highest, the lower part of the bust is bigger than the Type 1 and the degree of being broad and drooped is second to Type 1. Type 3 is the cone type with a breast of being drooped and broad a little bit and a certain degree of a volume. Type 4 is the flat type with the smallest value in the item that shows the obesity of the bust area and with the smallest value in the R$\ddot{o}$hrer index to have the small and slender body type for the bust area, which is somewhat flat due to a low slope at the internal side of the bust.

• 한국의류학회지
• /
• 제40권2호
• /
• pp.273-286
• /
• 2016

Protective coveralls are very uncomfortable to work in comparison to ordinary top and bottom separated clothing. A pattern maker has to consider the size of the human body and human motion range when designing protective coverall patterns. It is difficult to produce well-fitted coveralls because of the lack of readymade patterns despite the increased need for protective coveralls at various jobs. Patterns are decomposed by unsewing 18 products in the domestic market to provide the fundamental information on developing patterns for protective coveralls. The characteristics and differences of pattern types are compared after grouping patterns with information taken from the analysis of the shapes and measurements of patterns from the acquired patterns. The results of the analysis showed that on-market protective coveralls were less curved but much linear when compared to ordinary clothing patterns; however, the breasts and crotch circumferences were very loose and bulky, which is quite different from the other all-in one style working clothes. For the pattern shapes, patterns are classified into waistline-seamed and bustline-seamed types. The result of the hierarchical cluster analysis with 27 measurement variables were classified into four groups. Types by shape and measurements were related to each other; therefore, we expect the information of each type to be used in developing protective clothing patterns.

• 패션비즈니스
• /
• 제21권2호
• /
• pp.61-77
• /
• 2017

Although three-dimensional measurement systems for the human body have been studied, there is still an error between the measurements by the two-dimensional measurement method and the three-dimensional scanning method. Especially, in the case of the breast, the outline is not clear. The breast is made up of subcutaneous fat and mammary gland tissue, and it is easy to deform, making it difficult to grasp the exact shape. It is also more difficult to measure photogrammetry or three-dimensional measurement because it is difficult to obtain subjects because of the shame they are reluctant to expose. In this study, the angle and length of the line connecting the measurement points of the breast detail measurement items were compared with the unchanged measurement items such as breast width and center front length using the frontal and lateral photographs taken before and after breast enlargement surgery. The results of the study are as follows. The types of breast before and after surgery were classified into two groups and showed high accuracy rate. Therefore, it was possible to classify the breast type using the frontal and lateral views of the breast, and it was found that The PRM method can distinguish the characteristics of the breast type. Therefore, it can be useful for classifying and discriminating breast types.