• Applied Microscopy
• /
• 제40권4호
• /
• pp.267-270
• /
• 2010

The skin is the largest organ of the integument system whose surface is closely related with many physiological and pathological conditions. Various methods are used to understand the structural and functional status of human skin. We would like to present usefulness of scanning electron microscopic (SEM) observation of skin replica and its significance of training module for a novice. The silicon replicas from several regions of the body (hand, finger, forearm, lip, and face) were casted by applying Exafine$^{(R)}$ mixture. The positive replicas were prepared by applying EPON 812 mixture on negative silicon replicas. Some of the negative silicon replicas were cut with a razor blade and surface profiles were observed. The negative and positive replicas were coated with platinum and were observed under the scanning electron microscope. We could investigate the detailed structures of the human skin surface without any physical damage to the subject. The positive replicas depicted real surface structure of the human skin vividly. The cross sectional view of the negative silicon replicas provided surface profile clearly. The scanning electron microscopic observation of the human skin replicas would be useful to study skin surface structures and to evaluate medical and esthetical applications.

• 셀메드
• /
• 제9권4호
• /
• pp.9.1-9.4
• /
• 2019

Ayurveda is one of the ancient systems of traditional medicine in India, however, there is a lack of proper scientific research and controlled studies on efficacy and toxicity of several Ayurvedic formulations using the methods of modern science, which hinders the proper development of Ayurveda, both in India and abroad. The present study was undertaken to further corroborate the efficacy of some popular anthelmintic Ayurvedic medicines, as evident by the pharmacological effects of Ayurvedic formulations on body surface of a cestode parasite. This study employed a common intestinal cestode of domestic fowl, Raillietina sp., as a model parasite, that was exposed in vitro to different concentrations of three common Indian Ayurvedic anthelmintic drugs, namely Krimimudgar Ras, Kriminol and Vidangasava, and also to a modern anthelmintic drug, praziquantel (PZQ). After the paralysis of parasites, the specimens from the highest drug-treated concentration (50 mg/ml), praziquantel (1 mg/ml), and control groups, were collected and processed for scanning electron microscopic studies to document the effects of drugs on the body surface of parasite. In this study, maximum degree of alterations on parasite body surface was observed in the worms exposed to Krimimudgar Ras, indicating this drug to be highly efficacious against intestinal worms and brings out a transtegumental mode of action on parasite. In conclusion, the findings of present study suggest that of the three Ayurvedic formulations tested, Krimimudgar Ras possesses significant anthelmintic effects, which are mediated through parasite's body surface. Therefore, Krimimudgar Ras may be considered as a reliable anthelmintic Ayurvedic formulation, as validated through this study.

• 복식문화연구
• /
• 제10권6호
• /
• pp.709-717
• /
• 2002

In the apparel industry, the technology has been advanced rapidly. The use of 3D scanning systems fur the capture and measurement of human body is becoming common place. Three dimensional digital image can be used for design, inspection, reproduction of physical objects. The purpose of this study is to develop a method that drafts men's basic bodice pattern from scanned 3D body surface shape data. In order to pursue this purpose the researchers developed pattern drafting algorithm. The 3D scanner used in this study was Cyberware Whole Body Scanner WB-4. The bodice pattern drafting algorithm from 3D body surface shape data developed in this study is as follows. First, convert geometric 3D body surface data to 3D polygonal mesh data. Second, develop algorithm to lay out 3D polygonal patches onto a plane using Auto Lisp program. The polygon meshes are coplanar, and the individual mesh is continuously in contact with next one The bodice front surface shape data in polygonal patches form was lined up in bust and waist levels. The back bodice was drafted by lining up the polygonal mesh in scapula, chest, and waist levels. in the drafts, gaps between polygons were formed into the darts.

• 대한디지털의료영상학회논문지
• /
• 제12권2호
• /
• pp.145-150
• /
• 2010

Thick films of carbon fiber were prepared by a heating element of plan shape made in Darin co., We have investigated surface morphology of the specimen depending on heat-treatment temperatures. Scanning electron microscope(SEM) image of carbon fiber thick films of the specimen heat treated shows a grain growth at $1200^{\circ}C$ and becomes a poly-crystallization at $1350^{\circ}C$. The variation of resistivity at the thermally annealed specimen above $600^{\circ}C$ depends on type of the substrates. It may be due to a variation of film thickness and a difference of interfacial phenomena. A heating element of features was affected significantly by skin blood and quantity of heat of the body physiological function. After radiation of farinfrared for plate heating element, the function of biometric physiological is considered of skin blood flow and calorie which greatly affects on individuals. Electromagnetic wave was not influence on the body.

• 생태와환경
• /
• 제38권spc호
• /
• pp.1-7
• /
• 2005

To resolve some of the most pressing uncertainties of Peridinium identity, morphological characteristics of Korean Peridinium were examined using light and scanning electron microscopy. The Peridinium samples were collected from three different regions of Juam, Sang-sa and Togyo Reservoirs, when seasonal blooms occurred. Formula of the epithecal plate was recorded with 7 precingular, 3 intercalary, and 4 apical plates (4', 3a, 7"). An apical pore, 3 ${\sim}$ 5 ${\mu}m$ in size, was apparently present. The cingulum was easily observed under light microscope, and was considerably offset by about 15 ${\mu}m$ (2 ${\sim}$ 3 times per cingulum width). The sulcus was straight longitudinally and widened apparently towards the antapex. None of spine was found on the surface of the thecal plates on scanning electron micrographs. The average body length was 50.4 ${\mu}m$ with a range of 29 ${\sim}$ 63 ${\mu}m$. The geometric dimension, as designated to the body length:width ratio, was found from calculation to be 1.12 with a range of 1.00 ${\sim}$ 1.35, therefore, the cell was shown slightly elongated. Based on their morphology, the causative organisms of red tides in three different Korean waters were identified as P. bipes f. occultatum, which was reported for the first time in Korea.

• Parasites, Hosts and Diseases
• /
• 제22권1호
• /
• pp.21-29
• /
• 1984

유혈목이에서 얻은 피낭유충을 생쥐(mouse)에 실험 감연시킨후 소장에서 수집한 Fibricole seoulensis 성충의 표피 메세구조를 주사전자현미경을 사용하여 관찰하였다. 1. 충체전반부는 자갈모양 원형질돌기(cobblestone-like cytoplasmic processes)로, 충체후반부는 손가락모양 원형질돌기(finger-like cytoplasmic processes)로 덮혀 있었다. 2. 전단 배면에는 상모양가시(spade shape spine)가 60∼70개 있었으며, 충체전반부에는 끝이 3∼4분지된 가시가 분포하고 있었는데, 특히 배면 전방 중앙부분에 밀집되어 있었다. 3. 구흠반 후면과 닥흡반에는 끝이 2∼3분지된 가시가 배열되어 있었다. Tribocytic organ 외면은 고사상으로 주름져 있었으며 stout recurved spine으로 무장되어 있었다. 충체후반부의 앞 1/3까지 끝이 분지되지 않은 가시가 발견되 었다. 4. 제 I형 감각유두(ciliated knob-like papilla)는 충체전반부 배면과 복면에 거의 과우대칭적으로 분포하였으며, 특히 구흡반, 복홈반, tribocytic organ 주위와 전반부의 외연에 밀집되어 있었다. 제 II형 감각유두(non-ciliated round swellings)는 구흡반과 복흡반의 외연(lip)에 각각 24개씩 배열되어 있었다. 제 III형 감각유두(plate-like elevation)는 충체후반부 전면에 걸쳐 분포하였다. 이 3가지 감각유두는 그 구조와 분포로 보아 tangoreceptor 혹은 rheoreceptor로 생각되었다. (이 연구를 진행하는데 정성을 다해 도와주신 서울대학교 의과대학 전자현미경실 이하규선생 과 강미숙양 그리고 좋은 사진을 찍을 수 있도록 배려해 주신 주식회사 한국 ISI이만희 사장님과 관계직원 여러분께 감사드립니다.)

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.122-129
• /
• 2020

The circumference of the body is not only an indicator in order to buy clothes in our life but an important factor which can increase the effectiveness healing properly after figuring out the shape of body in a hospital. There are several measurement tools and methods so as to know this, however, it spends a lot of time because of the method measured by hand for accurate identification, compared to the modern advanced societies. Also, the current equipments for automatic body scanning are not easy to use due to their big volume or high price generally. In this papers, OpenPose model which is a deep learning-based Skeleton Tracking is used in order to solve the problems previous methods have and for ease of application. It was researched to find joints and an approximation by applying the data of the deep camera via reference data of the measurement parts provided by the hospitals and to develop a program which is able to measure the circumference of the body lighter and easier by utilizing the elliptical circumference formula.

• 패션비즈니스
• /
• 제19권3호
• /
• pp.130-143
• /
• 2015

By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.

• 한국의류학회지
• /
• 제37권6호
• /
• pp.799-808
• /
• 2013

Previous research reported that body size measured as Body Mass Index (BMI) and body shape measured as waist-hip-ratio (WHR) are two essential factors that form the perceptions of body attractiveness. However, the debate on the importance of BMI versus WHR is ongoing. In addition, scholarly articles, that focus on the role of geographic and cultural variability on perceptions of attractiveness, report inconsistent results. Some suggested that according to globalization and the rise of mass media, geographic variability of perceptions of attractiveness have been altered, while others believed that it remains. This study cross-regionally investigates the role of body size and body shape on the perceptions of female attractiveness. Samples were composed of 107 female college students in Alabama and 107 female college students in California. Participants viewed 27 three-dimensional body scan images of women in three body shapes (pear, hourglass, and rectangle) and three body sizes (underweight, normal weight, and overweight) and rated their perceptions of attractiveness. Images were shown to students in a random order with an overhead projector and Microsoft Office PowerPoint software. A three-way mixed-ANOVA was conducted to analyze the data. The results of the study showed that some regional differences exist between the two sample groups. However, regardless of the regional difference, hourglass shapes were perceived to be the most attractive shape and underweight sizes were perceived to be the most attractive size for both samples.

• 대한치과보철학회지
• /
• 제61권3호
• /
• pp.245-256
• /
• 2023

임플란트 고정성 보철물 제작 시 디지털 시스템을 이용하여 수복할 때, 3차원적인 임플란트 위치의 구내 스캔과 임시 의치 혹은 임시 보철물 장착 후 구내 스캔을 이용한 이중 디지털 스캐닝(double digital scanning) 기법이 필요하다. 구내 스캔 시, 스캔 바디를 안정적인 랜드마크로 이용하면 다지털 인상의 정확도 향상과 기공과정이 효율적이고 단순화될 수 있다. 본 증례는 완전 디지털 시스템을 활용하여 맞춤형 치과용 임플란트 지대주 및 임시 보철물, 최종 보철물을 계획하고 제작하였다. 임플란트 식립 후, 임플란트에 체결한 구내 스캔 바디와 임시 의치 조직면에 인기 된 구내 스캔 바디의 스캔 영역을 중첩하였다. 중첩된 파일에서 임시 의치의 수직 고경에 맞는 맞춤형 치과용 임플란트 지대주와 임시 보철물을 제작하여 환자에게 시적 하였고, 임시 보철물을 토대로 최종 보철물을 제작하였다. 임시 의치 제작 시 설정한 수직 고경, 중심위 등을 최종 보철물까지 활용하여 기능 및 심미적으로 만족할 만한 결과를 얻어 이를 보고하고자 한다.