• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.656-660
• /
• 2009

Various dynamic models of seated posture human body have been developed because the importance about the ride comfort assessment of vehicles is highly emphasized from day to day. The dynamic models of human body make possible the simulation of ride comfort assessment by applied to the vehicle dynamic model. Recently, the importance of ride comfort is also regarded to working vehicles such as excavators and the research of the ride comfort assessment for working vehicle is required. Only vertical vibration dominantly occurs on the seat of the private car driving with constant velocity. In contrast, vertical/fore-and-aft/pitch vibration seriously occurs on the seat of the working excavator. So, the dynamic models of seated human body applied to working vehicles should describe the dynamic characteristics for vertical/fore-and-aft/pitch direction. In this paper, the dynamic characteristics of seated human body are represented as apparent inertia matrix. The apparent inertia matrix is obtained by the vertical/fore-and-aft/pitch excitation of seated human body. 6 resonance frequencies are observed in apparent inertia matrix. This result can be applied to develop the dynamic model for seated posture human body.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.128-133
• /
• 2021

Recently Recently, the incidence of spinal diseases due to poor posture among students and office workers is increasing, and various studies have been conducted to help maintain correct posture. In previous studies, a membrane sensor or a pressure sensor was placed on the seat cushion to see the weight bias, or a sensor that restrained the user was attached to measure the position change. In our previous study, we developed a sensor device which can be easily attached to the body with an adhesive gel sheet and that measures and outputs the user's posture and body position in real time, but it has a limitation in the accuracy of the sensor value. In this study, a study was conducted to improve the performance of the position conversion sensor device and quantitatively evaluate the accuracy of the angle conversion measurement value, and a high accuracy with 2.53% of error rate was confirmed. In future research, it is considered that additional research targeting actual users is needed by diversifying posture correction training contents with multimedia elements added.

• International journal of advanced smart convergence
• /
• v.3 no.1
• /
• pp.15-19
• /
• 2014

This study was compared the variation system of body posture condition for stability by the posture. We used a model of bio parameter on the basis of the move state in the standing posture. We compared the sway movement derived from average of the physical sensing condition. Vision condition of variation average (Vi-${\sigma}_{AVG-AVG}$) was verified slightly greater at $13.746{\pm}4.05$ unit. Vestibular condition of variation average (Ve-${\sigma}_{AVG-AVG}$) was verified slightly larger at $7.829{\pm}1.071$ unit. Somatosensory condition of variation average (So-${\sigma}_{AVG-AVG}$) was verified slightly smaller at $2.592{\pm}0.538$ unit. CNS condition of variation average (C-${\sigma}_{AVG-AVG}$) was verified slightly larger at $0.46{\pm}0.105$ unit. The valuation system will be to deduce the model of body management with falling and stroke and all that sort of things. There will be to infer a data algorithm and the evaluation of processing system.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1049-1060
• /
• 2011

The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.

• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.91-97
• /
• 2018

Purpose: The purpose of this study was to observe the effects of sport massage and McKenzie stretch exercise on forward head posture. To understand the effect, this study measured and analyzed body alignment of the neck. Methods: In this study, a total of 14 subjects with forward head posture were analyzed. Subjects were divided into two groups: group 1 (n=7) received a McKenzie stretch exercise and group 2 (n=7) received a McKenzie stretch exercise and a sport massage. The McKenzie stretch exercise was performed three times a week, for four weeks, while the sport massage was performed once a week. The body alignment of the neck (CVA, CRA) was measured using a goniometer. Results: The improvements in neck body alignments (CVA, CRA) after the McKenzie stretch exercise and sport massage were both significant (group 1: p<0.05; group 2: p<0.05), whereas the between-group comparison found no significant differences. Conclusions: In conclusion, our study confirmed that the McKenzie stretch exercise and sport massage had a significant positive effect on the body alignment of the neck. However, a study that included a greater number of subjects and a long-term treatment period is needed to generalize these results.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.31-35
• /
• 1998

Many reaearchers have reproted that poor body postures are associated with pains or symptoms of musculoskeletal dissoders. Therefore, the ergonomic evaluation of postural stresses as well as biomechanical stresses is important when a job such as automobile assembly tasks involves highly repetitive and/or prolonged poor body postures. A macropostural classification shema was developed to characterise various body postures occurring in automobile assembly tasks in the study. To specify a postural code and stress level to each body posture, perceived joint discomforts were subjectively evaluated in the lab experiments for the full range of motion in five human body joints. Based on the reaults, a postural classification scheme was developed where the full range of motion in each body joint was classified into several codes repressenting different stress levels. The automobile tasks were clustered into 12 types based on the result walk-in-surveillance and the possible posture codes for each task type are defined. I was exposed that the poor postural problems in automobile assembly tasks were concerned in most part with arms, trunk and neck. Application of te developed schema to seven operations in automobile assembly tasks showed that the schema can be used as a tool to identify the operations and tasks involving highly stressful body postures. The schema can also be utilised as a basis to prioritise the candidate assembly operations for redesign of work methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.16-23
• /
• 2018

Postural instability can increase the likelihood of hazardous slip and fall accidents in workplaces. The present study intended to extend understanding of the effect of abnormal neck posture on postural control during quiet standing. The effect of body fatigue on the postural control was also of primary concern. Twelve healthy undergraduate students volunteered to participate in the experiment. Standing on a force platform with the neck neutral, flexed, extended, or rotated, subjects' center of pressures (COP) were measured under the two levels of body fatigue. For the fatigue condition, Subjects exercised in a treadmill to meet the predetermined level of body fatigue. Analyzing the position coordinates of COPs, the length of postural sway path was assessed in both medio-lateral (ML) axis and anterior-posterior (AP) axis. Results showed that, in AP direction, neck extension or rotation significantly increased the sway length as compared with neck neutral. Neck extension led to greater sway length compared to neck rotation. Neck flexion did not differ from neck neutral. The sway length in the AP direction also became significantly larger as the body fatigue accumulated after treadmill exercise. In ML direction, as compared to neutral posture, the neck extension, flexion, or rotation did not significantly affect the length of postural sway path. However, the sway length seemed to increase marginally with the neck extended during the fatigued condition. This study demonstrates that abnormal neck posture may interfere with postural control during standing. The ability to maintain postural stability decreases significantly with the neck extended or rotated. Body fatigue leads to postural instability further.

• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.3
• /
• pp.125-136
• /
• 2017

Objectives The present study was designed to analyze the posture pattern of healthy right-handed male and to investigate the effect of Chuna treatment. Methods Twenty healthy right-handed male were selected in this study. Body posture was measured by Body $Style^{(R)}$. After that, subjects received Chuna treatment on lumbar and pelvis area. Finally, the 2nd measurement was carried out. Results In shoulder height, left shoulder was higher than right one. In pelvic height, right iliac crest was higher than left, followed by longer right leg than left. In lower limb angle suggesting valgus or varus knee. In height of scapula inferior angle, right seemed higher than left. After the Chuna treatment, shoulder height, pelvic height, and leg length difference showed significant improvement. Other variables showed improvement but it was not significant. Conclusions These results suggest that right-handed male have some characteristic posture pattern because of their daily life habits, and Chuna treatment can be effective in correcting bad posture.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.171-181
• /
• 2009

This study was carried out to evaluate a musculoskeletal symptom and the work posture of the nurses in an operating room who have worked in the present department for more than one year. The job analysis of operating room nurses for ergonomic work posture analysis is divided into 14 tasks. On the basis of that, a survey research and ergonomic work posture analysis are also carried out. Among 41 operating room nurses of a cancer center in Kyonggi province who responded to the self-administered questionnaire, 20 nurses were observed and videorecorded to apply Rapid Entire Body Assessment(REBA) to ergonomic work posture analysis from April 16, 2007 to May 18, 2007. The results of analysis are as follows. The prevalence rate of musculoskeletal symptoms was 75.6% and its prevalence rates by part of the body are these followings; lower back and leg/foot 43.9%, shoulder 36.6%, neck 34.1%, hand/wrist/ finger 22.0%, arm/elbow 14.6%. In accordance with the results of ergonomic work posture analysis, 4 tasks that have a REBA score of 8 have high-risk levels and require an immediate management. It shows there is a significant correlation with overall musculoskeletal symptoms and objective workloads that are estimated by REBA. In conclusion, the work conditions of operating room nurses should be improved. It is also necessary that inappropriate work postures and ergonomic work conditions are improved to prevent musculoskeletal disorders of operating room nurses.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.172-180
• /
• 2022

Objective: The purpose of this study was to investigate the effects of squat exercises using elastic bands of ballet dancers on muscle activity, arabesque angle, and static balance of ballet dancers during arabesque posture. Design: A randomized controlled trial Methods: A total of 25young female ballet dancer svoluntarily participated in the study. The participants were randomized to the elastic resistance squat group(n₁=13) and body squat group(n₂=12). The squats exercise was applied to a total of 12 exercises per four weeks and consisted of 15 times per one set in one to two weeks, 4 sets in three to four weeks. All subjects were evaluated muscle activity, arabesque angle, and static balance during arabesque posture at before-after intervention. All participants were measured muscle activity, arabesque angle, and static balance during arabesque posture at before-after intervention. Results: Elastic resistance squat group and body groups showed a significant increase in the muscle activity, angle, and static balance ability during arabesque posture(p<0.05). In the comparison between the groups, the elastic resistance squat group showed a significant increase in muscle strength, angle, and static balance during arabesque posture (p<0.05). The results showed that the elastic resistance squat exercise was more increased than the body squat exercise in all variables (p<0.05). Conclusions: Therefore, when planning a training program for a ballet dancer, the elastic resistance squat movement can be applied as an exercise method to improve the muscular performance and balance ability of the ballet dancer.