• 수산해양교육연구
• /
• 제25권3호
• /
• pp.690-696
• /
• 2013

This study, which is conducted on two groups of skilled people and unskilled people, is purposed to analyze joint angle of lower extremity during short track speed skating in order to find out efficient body position and propose ideal training method. Short Track Speed Skating has a wide range of research areas, but their findings indicate a promising area for further research. Targeting 8 people who are skilled in short track speed skating and 8 people who are not skilled in it, this study analyzes three dimensional images using super-high speed camera to compare differences between these two groups of people. In this study, 6 sections of body positions including right foot push-off, right foot recovery, right foot basic position, left foot push-off, left foot recovery, and left foot basic position were analyzed using 8 super-high speed cameras of VICON. These body positions were analyzed in order to find out joint angles of the hip joint, the knee joint, and the ankle joint. In the section 4 of the inner and outer parts of the left hip angles showed significant difference, and most of the sections of knee joint angles also showed significant difference. In the section 1 and 2 of the plantar flexion, dorsiflexion of ankle joints showed significant difference(p<.001) It was found out that there were differences between groups of skilled people and unskilled people in terms of lower extremity's joint angles such as angles of the hip joint, the knee joint, and the ankle joint.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.373-380
• /
• 2010

The purpose of this study was to evaluate the effect of balance training on gait stability. The study population included 17 male high school students who were divided into 3 groups, each of which underwent one of the following types of balance-training programs for 8 weeks: 1 foot standing on cushion foam, trunk muscle training, and inverted body position training. 0, 4, and 8 weeks, the following experiment was performed: The participants were asked to close their eyes and take 17 steps; the stability of forward and sideward movement was determined, and the direction linearity was measured. The results revealed that all the training programs caused a decrease in stride deviation and an increase in the and the stride length, thereby improving the stability of forward movement. All the programs decreased the variation in step width and were thus also effective in improving the stability of sideward movement. The inverted body position training program was considered very effective because the cross point appeared on post hoc graphic analysis after 4 weeks, and the deviation length for 10 m was low, i.e., below 4 cm. All the programs were effective with respect to direction linearity because they decreased the deviation in direction widths. The results indicate that whole-body neurocontrol training is more effective than simple muscle training and local focused balance training, although this neurocontrol training-in the form of inverted body position training-required a longer training period than did the other programs.

• The Korean Journal of Pain
• /
• 제10권1호
• /
• pp.89-92
• /
• 1997

Neurolytic splanchnic nerve block is effective for treatment of intractable upper abdominal cancer pain. Conventional approach for splanchnic nerve block is conducted in the prone position to ensure proper orientation and to allow insertion of needles on each side of the vertebral body. However, the prone position has some technical disadvantages as this position is frequently poorly tolerated by a majority of patients with advanced cancer due to severe abdominal pain, ascites and so on. Male patient, 53-year old with transverse colon cancer, carcinomatosis peritonei and $L_1,\;L_2$ vertebral body metastasis, was admitted for treatment of severe right upper quadrant and right iliac crest pain. We performed neurolytic splanchnic nerve block with transdiscal technique in the lateral decubitus position under fluoroscopic guidance, and well noted the usefulness and the advantage of this technique. The benefits of this technique are safe, simple and effective because the lateral position is better tolerated by patients and makes bony landmarks more accessible during fluoroscopy.

• 한국운동역학회지
• /
• 제31권4호
• /
• pp.283-289
• /
• 2021

Objective: The aim of this study was to analyze the pattern of Kolman technique by five Korean top gymnasts including the three national athletes on horizontal bar. Method: Two digital high-speed camcorders were used with 90 frames/sec and their Kolman motions were filmed in sports science secondary school gymnasium at U city. After the kinematic and kinetic variables were carried out by Kwon3D 3.1 motion package during the whole phase, the optimized release motion was investigated by simulating the body COG path during the aerial phase. Results: Firstly, it was revealed that the average changes of hip, shoulder joint angle were 84 deg, 53 deg respectively during the functional sub-phase and the average swing phaseal time was 1.21 s. Secondly, it was revealed that the average body COG positions and velocities (Y, Z) at release were -0.65 m, 0.48 m, 1.65 m/s, 3.97 m/s respectively and the average release angle, peak height and flight time were 67 deg, 1.29 m, 0.79 s respectively. Thirdly, it was revealed that the directions of somersault of whole and lower body, tilt of lower body were counterclockwise, whereas the directions of tilt of whole body, twist of whole and lower body were clockwise at the ready for re-grasp. Lastly, it was revealed that the body COG paths were different from each other during the aerial phase followed by the different body COG velocities. Conclusion: Korean gymnasts of this study controlled their motions well in terms of the timing of hip·shoulder joint, body position, body angular momentum especially during the functional sub-phase, but their motions were different during the aerial phase. Nonetheless most of them made the adequate body position at the instant of re-grasp. It would be suggested that Korean gymnasts except S3 should increase the vertical velocity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1511-1515
• /
• 2004

Machine vision system plays an important role in factory automation. Its many applications are found in automobile manufacturing industries, as an eye for robotic automation system. In this paper, an automobile position measuring vision system(APMVS) applicable to manufacturing line for under body painting of a car is introduced. The APMVS measures position and orientation of the car body to be sealed or painted by the robots. The configuration of the overall robotic sealing/painting system, design and application procedure, and application examples are described.

• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.761-766
• /
• 2010

The goal of this study is to analysis natural frequency for different static postures of human leg. To perform this research human leg is modeled by multi-body modeling for the musculoskeletal system. This leg model has biarticular muscles which acting on two joints and the muscles represents some of the major muscles, such as hamstring, of the upper and lower limbs. To obtain each static equilibrium position energy method is employed and to analysis natural frequency linearization method for constrained mechanical system is employed. Static equilibrium position depends on some parameter or condition such as hamstring stiffness or external force. Making a change these parameter the aim of this research can be performed.

• The Journal of Korean Physical Therapy
• /
• 제16권4호
• /
• pp.264-282
• /
• 2004

The purpose of the study was to investigate the effectiveness of ankle mobilization on neck and shoulder position. One hundred volunteers, aged between 18 and 26 years (mean age 22), were recruited and each subject was divided into four mobilization groups by their body type, which is based on the concept from 'general coordinative manipulation' and a control group. Ankle mobilization was applied based on their body type and no mobilization was applied on those of the control group. The positions of shoulders and neck were measured in comfortable standing posture. All measurements were taken before and after ankle mobilization from each subject in mobilization groups and those of control group was measured twice between ten minutes by a different tester on three different occasions. Twenty subjects were in each group basis of their body type and a control. In the position of neck and shoulder, all subjects regardless group showed significantly changed their neck

• PNF and Movement
• /
• 제8권1호
• /
• pp.31-39
• /
• 2010

Purpose : The purpose of this study is to ascertain whether age, body mass index(BMI) and exercise frequency(EF) are correlated with knee joint position sense in healthy women. Methods : Healthy women of 150 who participated in this study were tested knee joint position sense; each reposition error was analyzed according to the age, BMI and EF. Reposition error was measured with a Myrin goniometer. Results : The age groups, BMI groups and EF groups demonstrated significant differences of the knee joint position sense. The older the healthy women are, the higher BMI is, and the lower EF is, the more decreased knee joint position sense has become. Conclusion : The older the women are, the higher BMI is, and the lower EF is, the more decreased the knee joint position sense in healthy women is. Therefore it needs to be considered to require management of obesity and regular exercise for prevention of knee injuries due to decreased joint position sense.

• 한국전자파학회논문지
• /
• 제23권2호
• /
• pp.229-234
• /
• 2012

본 논문에서는 wireless body area network(WBAN)에서의 채널 성능을 측정하고 분석하였다. 실험은 무반향실에서 다양한 인체 움직임과 송신 안테나 위치에 따라서 2.45 GHz ISM 대역 채널을 측정함으로써 이루어졌다. $2{\times}1$ 다중 입력 다중 출력 시스템의 다이버시티 이득과 상관 관계를 비교하기 위하여 두 송신 안테나를 인체의 서로 다른 위치에 부착하였다. 본 논문에서의 실험 결과는 송신 다이버시티 시스템의 outage 채널 용량은 두채널 간의 상관 관계와 깊은 관련이 있음을 보여준다.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2395-2406
• /
• 1992

본 연구에서는 방으로부터의 열손실 및 특수공간 내에서의 열전달에 응용할 수 있는 자료를 얻기 위하여 고온부가 존재하는 밀폐공간 내의 자연대류 열전달을 밀 폐공간의 경계조건을 좌,우측이 저온벽면이고 상,하면이 단열인 경우와 좌,우측이 단 열벽면이고 상,하면이 저온인 경우에 있어서 고온부의 중심 위치 X$_{c}$,Y$_{c}$를 수평으로 X$_{c}$,Y$_{c}$=0.2~0.5, 0.5 그리고 수직으로 X$_{c}$,Y$_{c}$=0.5, 0.2 ~0.5, 0.8까지 이동하여 수치해석하였고 실험과 비교 고찰하였다.