• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.529-541
• /
• 1993

The purpose of this study was to investigate not only the variability in the timing and amount of the maximum pubertal spurt in cranial base and mandible, but also its interrelationship with the timing of peak height velocity. This study was carried out by analysing biannual serial lateral cephalometric radiographs of twenty-six males and twenty-one females who were taken from 8.5years to 16.5years old of mean age, according to the established land-marks and linear measurements. The results of this study were summarized as follows. 1. Prevalance of the maximum growth spurt more than 80 percentage was occurred in all measurements of cranial base and mandible, except posterior cranial base length in the female. 2. In all measurements of cranial base and mandible, the maximum spurt was occurred earlier in the female than the male while it was greater in male in all measurements except ramal height. 3. In body height measurement, the peak height velocity was occurred 2 years earlier for the female(11.0 years old) than the male(13.0 years old). 4. The timing of maximum spurt in anterior cranial base length and total mandibular length in both sexes and ramal height in the female were coincided with PHV. The maximum spurt was occurred in both sexes in all measurements 2 years before or after PHV, except mandibular body length and posterior cranial base length the in female. 5. In all ages, there was significant correlation between the total mandibular length and ramal height, and was also correlation between total cranial base length and anterior cranial base length(P<0.05). However, there was no significant correlation between the ramal height and mandibular body length. In addition, there was also no any correlation between the anterior cranial base length and posterior cranial base length in all ages(P>0.05).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.3
• /
• pp.99-110
• /
• 2020

In terms of junior high school girls' growth patterns during early adolescence, are unlike childhood when relatively balanced growth patterns are found and high school years in which the normal adult body type is nearly reached, growth patterns displayed are imbalanced and rapid. In fact, diverse size changes by body part growth occur significantly different from individual to individual. Therefore, it has been hard for junior high school students to select their proper size when buying school uniforms. This study attempted to acquire basic data needed to address adolescent body shapes and school uniform patterns for junior high school girls, using the data from the 7th Size Korea Survey (2015). Specifically, it provides basic data for the development of school uniform patterns through the classification of their body into particular types, After extracting body shape components and a cluster analysis using ANOVA. According to a factor analysis conducted to determine body shape components, six factors were obtained: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: shape of upper body, Factor 5: lower drop, Factor 6: upper drop with a variance of 81.46%. To classify junior high school girls' body shape and determine their characteristics, a cluster analysis was performed with the variables obtained using factor analysis. Body shape was classified into three different types: Type 1 accounted for 30.7%. This was a short, slender body with the smallest bulk, size, and upper drop. Type 2 accounted for 24.9%. This was the largest in bulk and horizontal size and highest and length as well. Type 3 accounted for 44.5%. This type was close to average in terms of horizontal size, length and height, and high drop values. To develop school uniforms with great accuracy and body fit for junior high school students, there should be further studies on changes in body shape and their causes. The study results can serve as basic data for comparing branded school uniform patterns for junior high school girls and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.13-24
• /
• 2019

Adolescence is a transitional stage of physical development which occurs during the period from puberty to adulthood. Going through this period, various parts of an adolescent's body grow at different rates, leading to different body shapes and proportions when compared to adults. Therefore, this study aimed to investigate the body sizes and shapes of junior high school boys from ages 13-15 based on body measurement items that are used as the basis for school uniform designs including jackets, shirts, and pants. For this, the study sought the basic data needed to develop body shapes and school uniform patterns for junior high school boys using the data from the 6th Size Korea Survey (2010). Specifically, it provided basic data for the development of school uniform patterns that fit well through the classification of bodies into particular types. After extracting body shape componen a cluster analysis using ANOVA was performed. According to the factor analysis conducted to determine body shape components, 5 factors were obtained as follows: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: characteristics of horizontal size, Factor 5: shape of the upper body with a variance of 82.62%. To classify junior high school boys' body shape was determined using various characteristics, and a cluster analysis was performed with the variables obtained by the factor analysis. For this, body shapes were classified into 3 different types: Type 1 accounted for 33.4%, with a total of 463 subjects. This type was a tall, long body individual with the smallest bulk and size. Type 2 accounted for 22.7%, with a total of 315 subjects. This type was large in bulk and horizontal size, but the lowest in height and length. Type 3 accounted for 43.9%, with a total of 610 subjects. This type was close to average in terms of horizontal size, length, and height. To develop well-fitting school uniforms for junior high school students, there should be further studies on changes in body shape and their associated causes. The study results will be available as basic data for comparing branded school uniform patterns for junior high school boys and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Toxicological Research
• /
• v.5 no.2
• /
• pp.167-171
• /
• 1989

Potential teratogenicity of sodium glycyrrizinate in developing chick embryo was investigated. Body length was shortened significantly by dosage related when compared to untreated and vehicle control, but there was no significant difference on body weight, hind-limb length, claw length in all of the groups.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.39-46
• /
• 2016

Loss of postural stability can possibly lead to slip and fall accidents in the number of workplaces and everyday life. This study was aimed to examine the effects of whole body fatigue and partially limited visual field on the ability of maintaining postural balance during quiet standing. A group of twelve healthy male subjects participated in the experiment. Before and after experiencing the whole body fatigue induced by bicycling exercises, the position coordinates of subject's center of pressure (COP) were obtained under the two levels of visual field condition (i.e., open visual field and limited visual field). Four levels of the whole body fatigue examined were rest, 300watt, 600watt, and 900watt. Position coordinates of COPs measured on a force plate were then converted into the total length of postural sway path in both the medio-lateral (ML) direction and the anterior-posterior (AP) direction. Two-way ANOVA result showed that the length of sway path in the AP direction became significantly larger as the whole body fatigue accumulated. Post-hoc test revealed statistically significant differences between rest and 900watt and between 300watt and 900watt. The significant increase of the sway length was also found when the visual field was partially obstructed by the boxes. In the ML direction, however, there was no statistically significant difference of the postural sway in both the AP and ML directions. The results imply that the ability of maintaining postural stability can be reduced significantly due to such tasks along with whole body fatigue. The postural balance can also be impaired by the limited visual field.

• Journal of the Korean Society of Costume
• /
• v.67 no.3
• /
• pp.81-98
• /
• 2017

The purpose of this study is to provide basic information for the development of pants patterns with a high level of fit and comfort through calculating surface variations of lower body parts by movement, grouping them into factors, and analyzing how their surface variations link to one another. The achieved results will help determine essential elements for constructing pants patterns, such as key measurements of lower body parts, the amount of ease values and selection of fabrics, which should be taken into consideration for allowing better movement in clothing. The study required lower body 3D scanning of women for analysis, and 13 women between the ages of 20-24 participated in the scanning, which was done by using Artec Eva 3D scanner. Their scanned data were digitalized and converted to measure the values of their lower body surface length and girth in pre-determined positions such as walking, stair climbing and sitting on a chair. These measurements have been statistically analyzed through SPSS 21.0 to obtain the average amounts and rates of extension for each of the measurement item. Some of the highlighted study results are as follows: The surface length and girth measurements were grouped into 4 factors based on their average extension rates. The results from correlation analysis between measurement items within each factor demonstrated that common items linked to all the changes in the values of other items in the three movements. But in most cases, items were not always correlated with each other for different movements. The results also showed that there were correlations between girth measurements, length measurements, and girth and length measurements. Therefore, key measurements for daily pants should be determined within reasonable estimations between relevant measurement items, while the measurements for work pants, which often withstand certain postures or repetitive movements, may require measurement items that are appro priate for, and closely related to, certain movements or tasks.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.573-581
• /
• 2002

This study was done to classify children's somatotypes and to provide the fundamental data or their clothing sizing system for the purpose of designing patterns fur children's wear and standardizing sizes of ready-made clothes. The sampling was done for 7-8 years-old-girl living in Pusan and Kyungsangnam-do. Data from each girl comprises 33 anthropometic measurments and 7 photogrphic measurments, based on the somatometric characteristics of girls which I had obtained. Factor analysis, cluster analysis, discriminant analysis were performed for statistical analysis of the data. Seven factors which explain 76.49% of the whole variances were extracted. The thirst and second factors which explain more than 70% of the whole variances represent 'horizontal size 'and 'vortical size', which characterize most aspects of the body shape of the subjects. On the basis of the cluster analysis, three different upper body types were categorized. Type 1 has quite long surface length of the upper body and rising shoulders and are close to the averages of this age group. Type 2 has highest stature, biggest frame, dropped shoulders and surface length of the upper body similar to the type 1. Type 3 has shortest stature, smallest frame and sloping shoulders. According to the analysis to discriminate somatotypes of the upper body by this age group, the discriminative items in discriminant function are follows. As this group, waist circumference of discriminant function 1 and front length and length between both shoulder points of discriminant function 2 have large coefficient values.

• Korean Journal of Ichthyology
• /
• v.13 no.2
• /
• pp.117-122
• /
• 2001

Three species, Gymnogobius urotaenia, G. sp. 1 and G. sp. 2, collected at Hosan-river, Hosan-ri, Samcheock-si, Gangwon-do, Korea, were examined for the study of sexual dimorphism. The three species have peculiar nuptial pigmentation during the breeding season: all females of the three species showed an intense black coloration on the ventral part of the head, the pelvic fin, the anal fin and the margin of the first dorsal fin. There was a difference between G. sp. 1 and the other two species in 1/3 from margin of first dorsal fin. Namely, G. sp. 1 showed an intense black coloration, whereas the other two species had an intense yellow coloration. All females of the three species showed the same, intensely yellow coloration in the ventral part of the body. Males of G. urotaenia and G. sp. 2 had almost the same nuptial pigmentation, however the former showed diffuse black coloration in the anal fin, whereas the latter had an intensely black anal fin. Males of G. sp. 1 differed from those of the other two species in their yellow color on the ventral part of the head, the pelvic f ins, the anal fin, in contrast to the diffuse black coloration in those parts in the other species. The genital papilla of males was triangle-shaped, but that of females was heart-shaped. Significant differences between sexes include: G. urotaenia, 7 characters (body depth, head length, snout length, upper jaw length, head depth, pectoral fin ray length, eye diameter); G. sp. 1, 11 characters (body depth, head length, caudal peduncle length, caudal peduncle depth, snout length, upper jaw length, head width, head depth, anal fin ray length, pectoral fin ray length and caudal fin ray length); G. sp. 2, 10 characters (body depth, head length, caudal peduncle depth, snout length, upper jaw length, head width, anal fin ray length, pectoral f in ray length, caudal fin ray length and eye diameter). Of the 5 characters which showed differences in all three species (body depth, head length, snout length, upper jaw length and pectoral fin ray length), females had higher values than males only in body depth, whereas males values in all other characters. The upper jaw length was the most distinctive sexually dimorphic feature, the upper jaw extended beyond the posterior margin of the eyes (p<0.001) in males but not in females.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.165-179
• /
• 2019

This study used 3D body scan data to classify body shapes according to the torso shape of adult males aged 20-75 years. This data will be provided so that the apparel industry can make apparel products corresponding to body characteristics by age. The study used 1,796 adult males between the ages of 20 and 75 and the 3D body shape data of the '5th Research on National Standard Anthropometry'. For data analysis, the program SPSSWIN Ver. 17.0 was used to calculate the mean and frequency allowing for a factor analysis, cluster analysis, analysis of variance, and Duncan test. To classify body shape according to the torso shape of adult males, this study considered nine factors: 'horizontal size of torso,' 'vertical size of body,' 'curve of torso and waist-abdomen flatness ratio,' 'length of torso,' 'shape of neck area,' 'degree of lateral curve,' 'difference between front and back interscye length,' 'shoulder armscye shape,' and 'chest flatness ratio.' Based on the results of the factor analysis, the torso shapes of adult males were classified into five types. Type 1 is "upright body with flat, curvy shape", Type 2 is "curve sway back body type", Type 3 is "flat, abdominally obese body", Type 4 is "obese, crooked body" and Type 5 is "thick sway front body type." named.

• Korean journal of applied entomology
• /
• v.49 no.1
• /
• pp.11-16
• /
• 2010

Measurements were made on morphology of each developmental stages of the chestnut weevil, Curculio sikkimensis, reared in the laboratory and field from 2003 to 2006. The size of egg was 0.8${\pm}$0.03 mm. The escaping larvae were measured, in average, as 98 mg in body weight, 10.65 and 3.99 mm in body length and width, and 1.70 mm in head width. Pupal size of female and male was 7.01 and 6.53 mm, respectively. The fresh weight (0.343 g), body length (7.76 mm) and width (3.38 mm), and head width (1.60 mm) of female adults were significantly bigger than those (0.268 g, 7.14 mm, 3.01 mm and 1.37 mm, respectively) of male adults. Proboscis length (6.53 mm) and antennal length (5.47 mm) of female was also significantly longer than those (3.56 and 4.63 mm, respectively) of male. The larvae of C. sikkimensis overwintered for 1~3 years and their body weight, body length, and body width were decreased. The ratio between proboscis length and body length, the basipodite position attached to the proboscis, and shape of the sex organ on the abdominal end could be used to discriminate sexes.