• 열처리공학회지
• /
• 제35권2호
• /
• pp.66-73
• /
• 2022

Partial-hardened hot stamping has been well known to be very effective to absorb more energy in automotive lateral crash. Hardness distribution and dimensional change after partial-hardened hot stamping have been studied to find out effect of thermal deformation of the heated hot stamping die on dimensional accuracy of automotive center pillar. Soft zone of commercial center pillar showed 275~345 in Vickers hardness, indicating bigger non-uniformity which resulted from thermal deformation of heated die. Dimensional changes in soft zone of the commercial center pillar measured by three dimensional scanner were much bigger than that in hard zone. It has been found that hot stamping die compensation considering thermal deformation in soft zone causes a significant decrease in hardness deviation in the soft zone, corresponding to 20 percent of commercial center pillar and subsequently leads to much higher dimensional accuracy.

• 복식
• /
• 제53권1호
• /
• pp.49-66
• /
• 2003

In the relationship between post-modern feminism and the body. the body of women, which has been taken as 'other' by dominant arguments, has escaped from the fixed idea at post-modern times and the post-modern feminists tried to escape from the taste of the times about body image that was prevalent in the former times.'The taste of the times' here means the fixed physical form of ideal women's body by the educational custom, and it includes the educational prescription which establishes the docile body of women. This kind of educational custom aims at the perfect and permanent restriction on size, shape, desire, attitude and movement as well as on the overall demeanor and each part of the body. And the custom produces 'dependent and trained'. that is, inferiorized women's body. Hence, this paper points out that the feminity as a fixed Physical form should be overcome in order to move forward, and as one part of the effort, it attempts to analyze the designs which deformed and distorted women's body in 1990s. This research indicates that the work, which tries to deviate the fantasized and casted women's mystery, has been closely connected with the expression of 'non-separate bodies' and 'irregular body shapes' in 1990s, which aims at escaping from the fixation of women's body Image. Therefore, it is concluded that the target design trend of this research, which expressed the deformation and perversion of the body, provides the anti-these against the ideal body image of women and the these of feminity. which have been reproduced in various methods and patterns throughout the public and the culture on the whole by expressing the refusal and deviation of the existing women's body image through the post-fixation of the body pattern.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.731-732
• /
• 2012

• 암석학회지
• /
• 제3권1호
• /
• pp.20-33
• /
• 1994

Some of the seven types of subgrain boundaries (Means and Ree, 1988) in octachloropropane samples show distinctive deformation patterns during their development. Type II subgrain boundaries migrate to accommodate the deformation difference between adjacent grains. The formation of Type III requires a rigid-body roation of grains to reduce misorientation of adjacent grains. Type I, IV, V and VI develop either in static or dynamic condition. Type VII form only in static environments after deformation. Ribbon grains can develop via Type III or Type IV process. The orientation pattern and density of subgrain boundaries are more or less stable through a post-deformation heating. Subgrain boundary orientations are symmetric with respect to the grain-shape foliation in pure shear. In simple shear, their maximum inclines toward the direction of shear.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2002년도 춘계학술대회 논문집
• /
• pp.34-38
• /
• 2002

A virtual human which can evaluate Kansei such as comfort, pain, etc. when the virtual human uses some product is developed. In this paper, method of the evaluation of Kansei by the virtual human is presented. The body of our virtual human is modeled as an uniform non-linear elastic one with a skeleton. The deformation of the body on the contact with some product is simulated using a FEM analysis, and by using of the simulated results (load distribution, strain, etc.) on the contact surface the Kansei is predicted. As examples of the application, comfort of buttocks on seating and pain of arm on hanging of bag are shown. This virtual human can apply for the design of virtual products and also the simulation of medical care.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.197-206
• /
• 2017

Purpose: Clarify the cause of the noise by the front wheel strut insulator, which is located in close proximity to the driver's seat. Methods: The improvement mechanism was confirmed through failure analysis and reproduction test of the joint generation mechanism. In addition, the main factors were analyzed through principal test. Results: This paper describes the mechanism of occurrence of noise due to deterioration and hardness increase of rubber, deformation on severe road surface, foreign matter and water inflow in cold weather. Conclusion: We found that the insulator and body deformation can be minimized without increasing the thickness of the body and the insulator and reinforcing the body by dispersing the input load by applying load distribution structure instead of the local forming structure of the insulator in the insulator robust structure.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.688-692
• /
• 2008

3차원 아바타 시스템에서 아이템들은 아비타의 체형마다 맞춰서 제작하여야 한다. 이러한 제작방식은 사업적인 측면에서 불리한점이 클 뿐만 아니라, 서비스하는 아바타의 체형, 종류와 같은 다양성 측면에서도 소비자의 욕구를 만족하기 어렵다. 다양한 체형의 아비타를 서비스하기 위해 제작해야 할 작업량은 기하급수적으로 늘어날 수밖에 없다. 본 연구는 아바타의 제형을 최소한의 데이터 제작으로 표현가능 하도록 메쉬모핑(mesh morphing) 기법을 활용한 3D 아바타 체형변형방법에 관한 것이다. 아바타의 기본제형과 변형될 체형을 토대로 실시간으로 표현할 수 있는 중간체형을 생성하는 방법과 기본체형에 맞게 제작된 의상, 헤어스타일, 신발 등 아바타 아이템 들을 중간체형에 맞도록 자동으로 변형하는 방법을 소개한다. 제시한 방법을 이용하면, 새로운 체형의 아바타를 도입하더라도 기 제작된 아이템들의 추가 제작 없이 새로운 체형에 맞는 아이템을 서비스할 수 있음을 보여준다. 또한 새로운 체형의 표현 방법이 실시간으로 적용할 수 있는 방직임을 보여준다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1024-1040
• /
• 2014

The theoretical background and a numerical solution procedure for a time domain hydroelastic code are presented in this paper. The code combines a VOF-based free surface flow solver with a flexible body motion solver where the body linear elastic deformation is described by a modal superposition of dry mode shapes expressed in a local floating frame of reference. These mode shapes can be obtained from any finite element code. The floating frame undergoes a pseudo rigid-body motion which allows for a large rigid body translation and rotation and fully preserves the coupling with the local structural deformation. The formulation relies on the ability of the flow solver to provide the total fluid action on the body including e.g. the viscous forces, hydrostatic and hydrodynamic forces, slamming forces and the fluid damping. A numerical simulation of a flexible barge is provided and compared to experiments to show that the VOF-based flow solver has this ability and the code has the potential to predict the global hydroelastic responses accurately.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.715-725
• /
• 2011

Objective: This study is aimed at developing Articulated Human Models(AHM) using superquadrics to improve the geometric accuracy of the body shape. Background: The previous work presents the AHM with geometrical simplification such as ellipsoids to improve analysis efficiency. However, because of the simplicity, their physical properties such as a center of mass and moment of inertia are computed with errors compared to their actual values. Method: This paper introduces a three steps method to present the AHM with superquadrics. First, a 3D whole body scan data are divided into 17 body segments according to body joints. Second, superquadric fitting is employed to minimize the Euclidean distance between body segments and superquadrics. Finally, Fee-Form Deformation is used to improve accuracy over superquadric fitting. Results: Our computational experiment shows that the superquadric models give better accuracy of dynamic analysis than that of ellipsoid ones. Conclusion: We generate the AHM composed of 17 superquadrics and 16 joints using superquadric fitting. Application: The AHM using superquadrics can be used as the base model for dynamics and ergonomics applications with better accuracy because it presents the human motion effectively.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1366-1374
• /
• 2009

Anterior cruciate ligament(ACL) of human body experiences a large deformation. May during everyday when large deformation is repeated by various activities such as outdoor activity, ACL easily get damaged. In order to acknowledge the effect of the cyclic large deformation to ACL, the constitutive equations for ACL are derived from experiment data. The concept of the objective stress rate plays a important role wherever large deformation occurs. In order to obtain the objective stress rates the eigenprojection technique is used. A comparison is made for four different cases: Jaumann rate, Green-Naghdi rate, logarithmic rate and twirl tensor of Eulerian triad rate for an isotropic material subject to cyclic deformation, such as simple shear motion. Four different materials are studied to compare the behavior of the materials for ACL using different objective rates. Finally, more complicated model with fibers for soft tissues is used to calculate the behavior subjected to cyclic large deformation.