• 제목/요약/키워드: bodice basic pattern

검색결과 92건 처리시간 0.025초

3차원 가상 착의 시스템을 이용한 여자 청소년용 길 원형 맞음새 연구 (Adolescent Girls' Bodice Pattern Fit Using the 3-Dimensional Virtual Clothing System)

  • 김도경;천종숙
    • Human Ecology Research
    • /
    • 제54권3호
    • /
    • pp.279-292
    • /
    • 2016
  • This research predicted the fit of the basic bodice patterns worn on adolescent girls' 3-dimensional scanned bodies. Six 3-dimensional scanned bodies were selected from the sixth Size Korea data. Each of them had good body posture and represented one of the three garment sizes: 79-160, 82-160, and 85-160. Experimental basic bodice patterns were drafted by three basic bodice pattern making methods. The fit of the basic bodice pattern was analyzed by the CLO 3D virtual clothing system. The results showed that the experimental basic bodice patterns did not fit well at the neck, shoulder, and back for adolescent girls. The fit of the basic bodice patterns varied by pattern making method or size. The basic bodice pattern A with the waist darts ending above the breast line showed the best fit among the three different types of experimental pattern. Among the three sizes 79-160, 82-160, and 85-120, size 79-160 basic bodice pattern showed the worst fit for adolescent girls. The results show that the placement and size of the bodice darts affect the basic bodice pattern fit. The basic bodice pattern making method of size 79-160 for adolescent girls should be studied in a future study.

여고생의 Bodice원형 개발에 관한 연구 (A Study on the Development of a Bodice Basic Pattern for High School Girls)

  • 김미숙;김경희
    • 한국의류학회지
    • /
    • 제24권7호
    • /
    • pp.1004-1014
    • /
    • 2000
  • The purpose of this study was to develop a well-fitting bodice basic pattern for high school irk. Two bodice patterns were first made based on the most recent existing drafting methods and sensory evaluation was done on the patterns by the present researchers Two high school girls possessing standard physical condition tried and evaluated the functionality of the garments made by the two bodice patterns. Based on the results of the evaluation, a new bodice basic pattern was developed. The new bodice basic pattern was drafted by long measurement method. The dimensions of new bodice basic pattern were as follows. Bust circumference=B/2+4cm, Arms hole depth=C.B/2+1.5cm, Back width=B/6+4cm, Front width=B/6+3cm, Back neck width=B/12+0.5cm, Back neck depth=Back neck width/3cm, Front neck width=B/12cm, Front neck depth=B/12+0.5cm. The sensory and functional evaluations were also conducted for the new bodice basic pattern and the two patterns drafted by the existing methods. The new bodice basic pattern showed better fit both visually and functionally than the existing patterns. SPSS package including means, standard deviation and one-sample T-test were used for data analysis.

  • PDF

원형치수 계산도구에 의한 바디스 원형 평가 연구 (A Study on Basic Pattern Evaluations Utilizing a Bodice Sloper Size Measurement Tool)

  • 홍지운;권숙희
    • Human Ecology Research
    • /
    • 제54권4호
    • /
    • pp.427-440
    • /
    • 2016
  • This study uses comparison tests of bodice basic patterns to research improvements in wearing evaluation methods based on differences in bodice basic patterns and body size. As study methods, we calculated body sizes for six types by selecting four types of bodice basic pattern and utilized bodice basic pattern size measurement tools. The study result are as follows. First, as the result of analyzing bodice basic patterns per each part and body size difference by bodice basic pattern size measurement tool, shoulder angle cover rate was J&K type 57.57%~68.41%, N type 53.13%~65.57%, L type 51.87%~63.73%, and H type 59.03%~68.20%. In the item of neck base circumference, it was J&K type 6.4~-16 mm, N type 10.7~-31.9 mm, L type -5.2~-13.4 mm, and H type -6.2~-15.4 mm. In the item of armscye circumference, it was J&K type -18.9~-59.4 mm, N type -15.2~-51.3 mm, L type -38.9~-52.7 mm, and H type -17~-42.2 mm. In the item of biacromion length, it was J&K type 23.2~-4.7 mm, N type 18.4~-10.4 mm, and H type 3.5~-5.7 mm. In the item of interscye back, it was J&K type and N type 17.6~-13.6 mm, L type 11.9~-13.6 mm, and H type 3.2~-11.8 mm. The item of interscye front was found in the sequences of study type and L type. Second, the Kruskal-Wallis test result (according to bodice basic pattern) indicated meaningful differences in items of shoulder angle cover rate, neck point to breast point, bust point-bust point, biacromion length and armscye circumference and H type had an overall higher rank.

성인여성의 등면형상 유형화와 길 원형 설계 (Adult women's back type classification and Development of the Basic Bodice Pattern)

  • 최선윤;이정란
    • 한국의류학회지
    • /
    • 제27권7호
    • /
    • pp.758-769
    • /
    • 2003
  • In this research, I classified adult women's back types through anthropometric measurement and photographic measurement to present a judging individual body size according to the type. Also, Ⅰ calculated regression fomula by types and presented the basic bodice pattern. The results were as follows: 1. The result of factor analysis indicated that 5 factors were extracted and those factors comprised 75.89% of total variance. 2. According to the cluster analysis, Ⅰclassified the back types into 6 types. Type 1 was passive posture in the upper and the lower parts of the back. Type 2 was active posture in the upper and the lower parts of the back. Type 3 had the lowest protrusion of the back. Type 4 had the upper part of the back which is mostly bent downward. Type 5 was the most suitable shape. Type 6 had the lower part of the back which was turned over the most. 3. Ⅰconducted a discriminant analysis to judge the body types of individuals. 4. For the calculation of measurements necessary for the basic bodice pattern, Ⅰpresented regression formulas by each type. 5. By conducting the wearing experiments, Ⅰsuccessfully made the final basic bodice patterns by types. As a result of comparative experiments between the basic bodice patterns and comparison bodice pattern, the suitability of basic bodice patterns were more highly assessed.

인체와 의복과의 공간적 감각에 따른 실루엣 변화에 관한 연구 - 남성복 상의원형을 대상으로 - (Simulation on Silhouette Variations According to Vacant Space Quantity between Body and Clothing -Focused on Men's Upper Body-)

  • 최미성
    • 한국의류산업학회지
    • /
    • 제7권2호
    • /
    • pp.225-230
    • /
    • 2005
  • This research was undertaken to compare basic bodice prototypes for Internet shopping customer, and to select a profitable fit vacant space quantity between clothing and body. A total one hundred of eighteen outfits (4 types of pattern ${\times}$ 9 subjects ${\times}$5 body areas) were constructed with basic bodice drafting method of Japan Bunka Women's University according to nine male body types. Fifty-two experts analysis of the different prototypes as five body area and evaluate the most appropriate ease amount and stabilization of the simulation images on the computer. The experiments with automated methods using simulation image are based on AZ program of TORAY, Japan. Data was analyzed using percentiles, frequency and $X^2$. Taken together, the present result of vacant space quantity and stability evaluation through images shows that there is a significant difference in the size variation of the chest circumference, shoulder slope and waist circumference. In case of ease amount, chest area, shoulder slope, waist area and armhole except neckline area were shown more appropriate on the basic bodice pattern without size change. In case of stabilization, the chest area, shoulder slope and armhole except waist area and neckline area was shown the best on the basic bodice pattern without size change. However the waist area was shown on the basic bodice pattern plus 2 cm, neckline was shown more appropriate on the basic bodice pattern plus 1cm.

3차원 계측장치를 이용한 길 원형의 여유량 분석 (Analysis of the Ease in Basic Bodice Pattern Using 3-D Measuring Instrument)

  • 심규남;서정권;이원자
    • 한국의류산업학회지
    • /
    • 제2권3호
    • /
    • pp.239-245
    • /
    • 2000
  • The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.

  • PDF

남성 재킷 패턴 설계에 관한 연구 (A Study on the Design of Men's Jacket Pattern)

  • 이원자;김진선
    • 복식문화연구
    • /
    • 제12권6호
    • /
    • pp.953-970
    • /
    • 2004
  • The purpose of this study was to design men's jacket pattern for variable body types by employing the data of wearing evaluation from experimental basic bodices selected by male subjects in the 30's. As a result of sensory evaluation, functional test and clothing pressure test by each type of experimental basic bodices, the 3rd experimental basic bodice was chosen to be a basic bodice type in this research since it showed a high degree in fitness and function, but a low in the clothing pressure test. As a comparison of one item from conventional jacket and sleeve pattern with each somatotype, the type 2(the standard somatotype) indicated a great fitness in both basic bodice type and conventional jacket pattern, whereas the type 1 and the type 3 showed higher fitness and moving function in the basic bodice type. In the making of men's jacket, many corrections were made in the front interscye breadth, back interscye breadth, front and back length, and shoulder line as adapting each body type. Thus, the ease-amount of chest circumference at scye for clothes should be established differently according to the size of chest circumference at scye.

  • PDF

19세기 말 20세기 초 서양 여성 3D 바디스 및 재킷 개발 - Gordon S. S.의 패턴북을 중심으로 - (Study on Developing Western Women's 3D Bodice and Jacket of the Late 19th to Early 20th Century - Based on the Pattern Drafting Book of Gordon S. S. -)

  • 류경화;김양희
    • 한국의류산업학회지
    • /
    • 제23권6호
    • /
    • pp.744-757
    • /
    • 2021
  • This study aims to develop a bodice and a jacket in 3D of the late 19th to early 20th based on the pattern drafting book of Gordon S. S., which contains body measurement method and pattern drafting system. The findings of this research are as follows. First, female tops of the late 19th to early 20th century are categorized as outer, jacket, vest, and bodice. Of these, this study highlights the jacket, which can be divided into 4 types: 4 kinds of basic jacket, 2 kinds of riding jacket, bolero jacket, and newmarket jacket. Second, by referring to Gordon's pattern drafting system and book, a bodice was developed in 3D format based on the adherence to the following steps: analysis of the pattern drafting system, pattern drafting, 3D virtual simulation, 3D virtual fitting analysis, and the pattern correction. A bodice pattern corrected by 3D virtual clothing simulation results was proposed. Last, a basic sleeve and collar pattern for a basic jacket was drafted, which was followed by the correction and transformation of the bodice pattern. The jacket developed shows great fit except for the issues at the armhole line and shoulder, which were caused by the unique shape of the sleeves(big sleeve head) of the time. The study attempted to develop the past costumes in 3D, providing the basis for interdisciplinary research in the field of fashion history field and suggesting a new approach for the virtual restoration of costumes. Future studies should target to 3D virtual simulation in accordance to the 3D avatar pose in the developed virtual costume.

컴퓨터디자인에 의한 Front Bodice의 Dart 변형에 관한 연구 (A Study on Dart Manipulation of Women's Front Bodice by Computer-Aided Design)

  • 신상무
    • 한국의류학회지
    • /
    • 제18권2호
    • /
    • pp.189-196
    • /
    • 1994
  • The purpose of this study is to develop a computer program for automatic dart manipulation, as well as basic pattern making, of women's front bodice. In addition to accuracy and efficiency In pattern making, this computer program provides variations of basic patterns through dart manipulation. AutoCAD, running on the Austin 486DX micro-computer is used for this research. The procedures of this study are as follows : 1. A pattern-making method for women's front bodice is selected. 2. All co-ordinate points are located following the same way and order of drafting. 3. Drafting of a basic front bodice is programmed 4. Functions for various single dart manipulations are defined. 5. Menu-driven user interface is developed.

  • PDF

3차원 인체 스캔 데이터를 활용한 남성용 바디스 원형 설계 방법 연구 (Men′s Bodice Pattern Making Method using 3-D Body Scan Data)

  • 서동애;천종숙
    • 복식문화연구
    • /
    • 제12권2호
    • /
    • pp.290-299
    • /
    • 2004
  • The purpose of this study is to testify the pattern making method to develop the men's basic bodice pattern using 3-dimensional body scan data. The experimental patterns were made by adding wearing ease on flattened body scan data and tracing the outlines of it. The experimental bodice pattern were composed of front, back, and side panels. To compare the difference between the experimental pattern and traditional pattern, two pattern making methods were compared. Two sets of basic bodice patterns were made for each of the 10 male subjects: a set of pattern was made by experimental method and the other set was made by Bunka pattern making method. The experimental and traditional patterns were measured at 13 dimensions. The results show that there was a difference between the experimental patterns and traditional patterns at the front length, back length, front width, front neck width, back neck width, and back neck depth. The fit was also compared for both patterns. The results of the fit test show that the experimental patterns were superior to the traditional patterns at the fit of neck, shoulder, and armhole. The experimental pattern making method was expected to be useful for mass customization.

  • PDF