• 제목/요약/키워드: blue-green laser

검색결과 38건 처리시간 0.034초

청록색 레이저를 이용한 수중영상 연구 (Underwater Imaging with a blue-green laser)

  • 이상훈;김근배;이광식;김달우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.2180-2182
    • /
    • 2000
  • Laser emission, a part of electromagnetic wave, has short propagation length in water, and the underwater applications of laser are limited. The acquisition of underwater imaging is possible only by using a blue-green laser since the blue-green range has relatively small absorption coefficient in water. We introduce the conditions of the laser required for underwater imaging and the attenuation characteristics of a blue-green laser used in water.

  • PDF

Wide bandgap III-nitride semiconductors: opportunities for future optoelectronics

  • Park, Yoon-Soo
    • 한국결정성장학회지
    • /
    • 제12권1호
    • /
    • pp.11-20
    • /
    • 2002
  • The world at the end of the $20^{th}$ Century has become "blue" Indeed, this past decade has witnessed a "blue rush" towards the development of violet-blue-green light emitting diodes (LEDs) and laser diodes (LDs) based on wide bandgap III-Nitride semiconductors. And the hard work has culminated with, first, the demonstration of commercial high brightness blue and green LEDs and of commercial violet LDs, at the very end of this decade. Thanks to their extraordinary properties, these semiconductor materials have generated a plethora of activity in semiconductor science and technology. Novel approaches are explored daily to improve the current optoelectronics state-of-the-art. Such improvements will extend the usage and the efficiency of new light sources (e.g. white LEDs), support the rising information technology age (e.g. high density optical data storage), and enhance the environmental awareness capabilities of humans (ultraviolet and visible photon detectors and sensors). Such opportunities and many others will be reviewed in this presentation.

RGB laser 를 이용한 온도에 따른 a-IGZO photo-response 분석 (Analysis of a-IGZO photoresponse using Red, Green and Blue Laser)

  • 김세윤;정연후;조광민;;김정주;이준형;허영우
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.110-111
    • /
    • 2014
  • RGB laser 를 이용하여 rf-magnetron sputtering 법으로 합성한 a-IGZO 박막의 photoresponse 를 관찰하였다. Air 분위기에서 red 파장을 조사 할 경우 비교적 slow recovery 특성을 보였으며, green 과 blue 파장을 조사 할 경우 red 보다 fast recovery 특성을 나타내었다. 그러나 진공에서 측정할 경우, red 파장에서는 recovery 가 빨라졌으며, green 과 blue 파장의 경우 recovery 가 매우 느려짐을 확인하였다. 이는 passivation 을 하지 않은 소자의 oxygen gas 의 흡/탈착 때문으로 예상할 수 있었으며, red 파장이 gas 탈착에 기여하는 정도가 매우 작고, green 과 blue 파장이 gas 탈착에 기여하는 정도가 매우 크기 때문인 것으로 생각할 수 있었다. 온도를 증가시킬 경우, 모든 경우에서 recovery 가 빠르게 나타났는데 이는 흡/탈착에 필요한 barrier 및 $V_o{^{2+}}$에서 Vo 로 돌아오기 위한 barrier 를 쉽게 넘어갈 수 있기 때문으로 이해 할 수 있었다. 이러한 결과를 stretched exponential equation 을 이용하여 해석하였으며 수치화 하였다.

  • PDF

청녹색 레이저 다이오드 구조에 관한 TEM 관찰 (TEM Observations on the Blue-green Laser Diode)

  • 이확주;류현;박해성;김태일
    • Applied Microscopy
    • /
    • 제27권3호
    • /
    • pp.257-263
    • /
    • 1997
  • Microstructural characterizations of II-VI blue laser diodes which consist of quaternary $Zn_{1-x}Mg_xS_ySe_{l-y}$ cladding layer, ternary $ZnS_ySe_{l-y}$ guiding layer and $Zn_{0.8}Cd_{0.2}Se$ quantum well as active layer were carried out using the transmission electron microscope working at 300 kV. Even though the entire structure is pseudomorphic to GaAs substrate, the structure had contained numerous extended stacking faults and dislocations which had created at ZnSe/GaAs interfaces and then further grown to the top of the epilayers. These faults might be expected to cause the degradation and shortening the lifetime of laser devices.

  • PDF

Development of tiny green laser for mobile projectors

  • Yu, N.E.;Jung, C.;Yu, B.;Lee, Y.L.;Kim, I.S.;Choi, J.W.;Ko, D.K.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.476-477
    • /
    • 2009
  • The smallest green laser containing a built-in temperature controlling unit has been demonstrated. The device volume was just 0.5 cubic centimeters, which is nearly the same size as existing red and blue diode lasers, has an electrical-to-optical conversion efficiency of 10% and 150 mW power output. Furthermore as an alternative approach for compact green laser development, a quasi-phase matching method with wide spectral bandwidth for the reduction of speckle noise will be presented.

  • PDF

아르곤 레이저의 소아치과에서의 임상적 적용 (CLINICAL APPLICATION OF ARGON LASER IN PEDIATRIC DENTISTRY)

  • 이미나;이상훈;김종철
    • 대한소아치과학회지
    • /
    • 제24권1호
    • /
    • pp.139-147
    • /
    • 1997
  • Argon laser used in this case report, is special in having two wavelength of 488, 514nm blue-green visible light spectrum. Blue light is used for composite resin polymerization and caries detection. Green light is used for soft tissue surgery and coagulation. Maximum absorption of this laser light occurs in red pigmentation such as hemoglobin. The argon laser may be well-suited for selective destruction of blood clots and hemangioma with minimal damage to adjacent tissues. Argon laser light penetrates tissue to the 1 mm depth, so its thermal intensity is lower than $CO_2$ laser light. Also, due to its short wavelength it can be focused in a small spot and even single gene can be excised by this laser and microscopy. After applicating argon laser to 4 patient for surgical procedure and to 1 patient for curing the composite resin, following results were obtained. 1. Improved visibility were gained due to hemostasis and no specific technique were needed according to easy recontouring of the tissue. 2. Ability to use by contact mode, tactile sense was superior but tissue dragability and accumulation of tissue on the tip needed sweeping motion. 3. Additive local anesthetic procedure was needed. 4. No suture and less curing time reduced chair time, this made argon laser available in pediatric dentistry.

  • PDF

펄스레이저 증착법의 레이저 파장변환에 의한 실리콘 나노결정의 발광 특성 연구 (Study on the Luminescence of Si Nanocrystallites on Si Substrate fabricated by Changing the Wavelength of Pulsed Laser Deposition)

  • 김종훈;전경아;최진백;이상렬
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권4호
    • /
    • pp.169-172
    • /
    • 2003
  • Silicon nanocrystalline thin films on p-type (100) silicon substrate have been fabricated by pulsed laser deposition technique using a Nd:YAG laser with the wavelength of 355, 532, and 1064 nm. The base vacuum in the chamber was down to $10^-6$ Torr and the laser energy densities were 1.0~3.0 J/$\textrm{cm}^2$ After deposition, silicon nanocrystalline thin films have been annealed at nitrogen gas. Strong Blue and green luminescence from silicon nanocrystalline thin films have been observed at room temperature by photoluminescence and its peak energies shift to green when the wavelength is increased from 355 to 1064 nm.

금 박막에서 표면 플라즈몬 공명과 국소적 밴드 간 천이의 상호작용 (Interaction Between Surface Plasmon Resonance and Inter-band Transition in Gold Thin Film)

  • 강대경;;;최봉준;박종후
    • 센서학회지
    • /
    • 제28권4호
    • /
    • pp.262-265
    • /
    • 2019
  • The effect of inter-band transition on surface plasmon resonance in gold thin film was investigated. We induced localized inter-band transition in the film by using incident light on its surface from a green laser (532 nm) source, and the surface plasmon resonance for inter-band transition was investigated at different wavelengths. It was determined that the reflectivity of blue light (450 nm) was significantly reduced in the region where the green laser was incident. We demonstrated that this decrease is mainly due to the coupling between the blue light and the surface plasmon resonance of excited electrons in higher energy states, based on experimental results for the incident and polarization angle-dependent reflectivity of the blue light.

분할화상분석에 의한 흐름 형태 시료의 탁도 측정 (The Turbidity Measured by Division Image Analysis in Flow Type Sample)

  • 박종호;박수행;유민수
    • 공업화학
    • /
    • 제20권6호
    • /
    • pp.681-684
    • /
    • 2009
  • 흐름 형태 시료의 탁도와 레이저 산란광 밝기의 관계는 비선형적이나 탁도 시료에 따라 레이저 산란광 화상은 형태가 서로 상이하다. 레이저 산란광 화상의 패턴을 이용하면 탁도 측정이 용이할 것이다. 그러나 레이저 산란광 화상의 모든 화소의 red, green, blue intensity (intensity)로 탁도를 측정하는 것은 분석에 과도한 부하가 발생한다. 따라서 과도한 부하를 줄이기 위하여 레이저 산란광 화상 분할하였다. 분할된 레이저 산란광 화상은 탁도에 따라 형태가 서로 상이함을 알 수 있었다. 분할된 레이저 산란광 화상의 intensity와 탁도로 학습된 인공신경망으로 측정된 탁도가 실제 탁도와 선형 관계임을 알 수 있었다.

색분리를 위한 Dichroic미러 및 광대역 고반사 미러의 설계와 제작 (Design and fabrication of dichroic mirror and broadband H/R mirror for color separation)

  • 박영준;박정호;황영모;김용훈;이진호;이상학
    • 한국광학회지
    • /
    • 제8권3호
    • /
    • pp.183-188
    • /
    • 1997
  • 색분리 필터는 하나의 파장영역에서는 고반사, 다른 파장영역에서는 고투과를 제공하는 광학소자이다. 레이저를 이용한 디스플레이장치의 광학계를 구성하기 위해서는 정확한 색상의 분리가 요구되며, 광학계 효율 측면에서 매우 중요하다. 본 연구에서는 Kr-Ar laser(혼합 gas)빔을 R.G.B 삼색으로 분리하여 화상을 구현하기 위한 미러와 필터를 아래와 같은 특성을 만족하도록 설계 및 제작하였고, 그 특성은 45.deg./S-편광된 빔을 입사시켜서 1) R(반사율)>99% 450~493 nm, T(투과율)>90% 509~685 nm 2) R(반사율)>99% 509~685 nm, T(투과율)>90% 450~493 nm 3) R(반사율)>99% 509-585 nm, T(투과율)>90% 600~683 nm를 각각 만족하는 소자로 색분리를 실현하여 레이저 프로젝션 시스템을 구성하는데 사용하였다.

  • PDF