• 경영과정보연구
• /
• 제34권3호
• /
• pp.125-140
• /
• 2015

본 연구에서는 현행 4부의 코스닥소속부제의 실효성을 검증하기 위해 현 제도에 따라 우량기업부로 구분된 기업집단을 대상으로 우량기업부 진입 전 후 기간의 이익조정 추세를 검토하였다. 구체적으로 2011년 현 소속부제의 시행에 따라 우량기업부에 진입한 111개 기업을 대상으로 우량기업부 진입 당해 연도와 진입 이전 이후 2개년을 포함한 총 5개 년도의 재량적 발생액과 실물이익조정치의 변화추이를 살펴보았다. 주요한 분석결과를 요약하면 다음과 같다. 먼저, 우량기업부에 소속된 기업만을 대상으로 우량기업부 편입 전 후 기간의 이익조정 추세를 검증한 결과 우량기업부 진입 직전 기간에 모든 이익조정 대용변수가 양(+)방향으로 크게 증가하며 그러한 이익조정치의 평균값이 통계적으로 유의하게 영(0)과 차이가 나는 것으로 나타났다. 또한, 우량기업부 진입 직전기간의 증가적 이익조정 현상이 이익조정에 영향을 미칠 수 있는 다양한 변인들을 통제한 다변량 분석체계에서도 다시금 입증되고 있음을 확인하였다. 이는 현행 소속부제의 평가시스템이 기업의 재무적 관점에 다소 편중되어 있어 내적가치가 부실한 기업이 우량기업부 진입을 통해 다양한 혜택을 누리고자 소속부 평가에 기초가 되는 우량기업부 진입 직전의 보고이익을 발생액 및 실물활동을 통해 광범위하게 증가시키는 경향이 있음을 보여준다. 이와 같은 본 연구의 결과는 증권시장에 대한 감독기관과 규제기관이 현행 소속부제의 공과 실을 면밀히 파악하여 부실기업과 우량기업을 보다 효과적으로 판별할 수 있는 제도적 장치의 마련을 강구하는 등 코스닥시장의 건전성 회복과 활성화를 위해 소속부제의 효익이 충분히 발휘될 수 있도록 운용의 묘를 살릴 필요가 있다는 정책적 시사점을 제공한다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.22-26
• /
• 2013

The author analyzes the luminous efficiency of the phosphor-conversion white light-emitting diode (LED) that consists of a blue LED chip and a yellow phosphor. A theoretical model is derived to find the relation between luminous efficiency (LE) of a white LED, wall-plug efficiency (WPE) of a blue LED chip, and the phosphor absorption ratio of blue light. The presented model enables to obtain the theoretical limit of LE and the lower bound of WPE. When the efficiency model is applied to the measured results of a phosphor-conversion white LED, the limit theoretical value of LE is obtained to be 261 lm/W. In addition, for LE of 88 lm/W at 350 mA, the lower bound of WPE in the blue LED chip is found to be ~34%. The phosphor absorption ratio of blue light was found to have an important role in optimizing the luminous efficiency and colorimetric properties of phosphor-conversion white LEDs.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.311-316
• /
• 2015

We investigate the temperature dependence of the phosphor conversion efficiency (PCE) of the phosphor material used in a white light-emitting diode (LED) consisting of a blue LED chip and yellow phosphor. The temperature dependence of the wall-plug efficiency (WPE) of the blue LED chip and the PCE of phosphor are separately determined by analyzing the measured spectrum of the white LED sample. As the ambient temperature increases from 20 to $80^{\circ}C$, WPE and PCE decrease by about 4.5% and 6%, respectively, which means that the contribution of the phosphor to the thermal characteristics of white LEDs can be more important than that of the blue LED chip. When PCE is decomposed into the Stokes-shift efficiency and the phosphor quantum efficiency (QE), it is found that the Stokes-shift efficiency is only weakly dependent on temperature, while the QE decreases rapidly with temperature. From 20 to $80^{\circ}C$ the phosphor QE decreases by about 7% while the Stokes-shift efficiency changes by less than 1%.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.66-68
• /
• 2014

Most commercial white LED lamps use blue chip coated with yellow emitting phosphor. The use of blue excitable red and green phosphors is expected to improve the CRI. Several phosphors, such as $SrGa_2S_4:Eu^{2+}$ and $(Sr,Ba)SiO_4:Eu^{2+}$, have been suggested in the past as green components. However, there are issues of the sensitivity and stability of such phosphors. Here, we describe gallium substituted $YAG:Ce^{3+}$ phosphor, as a green emitter. YAG structures are already accepted by the industry, for their stability and efficiency. LEDs with improved CRI could be fabricated by choosing $Y_3Al_4GaO_{12}:Ce^{3+}$ (green and yellow), and $SrS:Eu^{2+}$ (red) phosphors, along with blue chip. Also, the effect of a slight change in chip wavelength is studied, for two phosphor-coated w-LEDs. The reduction in particle size of the coated phosphors also gives improved w-LED characteristics.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.47-52
• /
• 2019

Micro-LEDs show lower efficiencies compared to general LEDs having large areas. Simulations were carried out using ray-tracing software to investigate the change in light extraction efficiency and light distribution according to chip-size of blue flip-chip micro-LEDs (FC ${\mu}-LEDs$). After fixing the height of the square FC ${\mu}-LED$ chip at $158{\mu}m$, the length of one side was varied, with dimensions of 2, 5, 10, 30, 50, 100, 300, and $500{\mu}m$. The highest light-extraction efficiency was obtained at $10{\mu}m$, beyond which the efficiency decreased as the chip-size increased. The chip size-dependence of the FC ${\mu}-LEDs$ both without the patterned sapphire substrate, as well as vertical FC ${\mu}-LEDs$, were analyzed.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.1-8
• /
• 2015

To produce the white light, there are a single chip method using the blue light and phosphor coating, a multi chip method by mixing R, G, B light.. Multi chip method is proper for the smart lighting system by controling color and color temperature. And color rendering of single chip LED is good by even spectral distribution. To apply application technic like smart light system, this paper analyzed the properties of single chip LED and RGB multi chip LED, and implemented the 2 part subject evaluation for single chip LED and RGB multi chip LED. The first part is comparison of properties for single chip LED and RGB multi chip and second part is color appearance evaluation of 8 colors in each lighting environment.

• KSBB Journal
• /
• 제28권4호
• /
• pp.254-259
• /
• 2013

Herein we present a diagnostic paper chip that can quantitatively detect albumin without external electronic reader and dispensing apparatus. We fabricated a diagnostic paper chip device by printing wax barrier on the paper and wicking it with citrate buffer and tetrabromophenol blue to detect albumin in sample solution. The paper chip is so simple that we dropped a sample solution at sample pad and measure the ratio of two travel distances of the sample solvent and albumin under the name of retention factor. Our result confirmed that the retention factor was constant in the samples with same concentration of albumin and useful determinant for the measurement of albumin concentration. The paper chip is affordable and equipment-free, and close to ideal point-of-care test in accordance with the assured criteria, outlined by the World Health Organization. We assume that this diagnostic paper chip will expand the concept of colorimetric determination and provide a inexpensive diagnostic method to aging society and developing country.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1280-1284
• /
• 2007

A series of Ca1-xSrxS:Eu (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) phosphors were synthesized by solid-state reactions. The Ca1-xSrxS:Eu phosphors have a strong absorption at 455 nm, which corresponds to the emission wavelength of a blue LED. The emission peak of Ca1-xSrxS:Eu is blue shifted from 655 to 618 nm with increasing Sr content. The characteristics of Ca1-xSrxS:Eu phosphors make them suitable for use as wavelengthtunable red-emitting phosphors for three-band white LEDs pumped by a blue LED. In support of this, we fabricated a three-band white LED by coating SrGa2S4:Eu and Ca0.6Sr0.4S:Eu phosphors onto a blue LED chip, and characterized its optical properties.

• Fisheries and Aquatic Sciences
• /
• 제5권1호
• /
• pp.36-42
• /
• 2002

Microarrayer is used to make DNA chip and microarray that contain hundreds to thousands of immobilized DNA probes on surface of a microscope slide. This paper shows the develop-ment results for a printing type of microarrayer. It realizes a typical, low-cost and efficient microarrayer for generating low density micro array. The microarrayer is developed by using a prependicular type robot with three axes. It is composed of a computer-controlled three-axes robot and a pen tip assembly. The key component of the arrayer is the print-head containing the tips to immobilize cDNA, genomic DNA or similar biological material on glass surface. The robot is designed to automatically collect probes from two 96-well plates with up to 12 pens at the same time. To prove the performance of the developed microarrayer, we use the general water types of inks such as black, blue and red. The inks are distributed at proper positions of 96 well plates and the three color inks are immobilized on the slide glass under the operation procedure. As the result of the test, we can see that it has sufficient performance for the production of low integrated DNA chip consisted of 96 spots within $1cm^2$ area.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.161-161
• /
• 2020