• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.275-284
• /
• 2007

Among the languages that allow long-distance reflexives, some languages have blocking effects, whereas others don't. The goal of this paper is to provide computational algorithms that can handle presence and absence of blocking effects of long-distance reflexives. We will examine the blocking effects in Chinese and Korea and develop computational algorithms for handling blocking effects in those two languages. The algorithms will be developed by incorporating Chierchia's Binding Theory into Steedman's Combinatory Categorial Grammar (CCG). Through the analyses and implementations, this paper illustrates how blocking effects can be implemented computationally.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.148-149
• /
• 2003

The parasitic effects due to the current blocking layer limit the bandwidth of the semiconductor laser diode. Thus, the parasitic response of various blocking layers was analyzed. The inin type was the best choice for the leakage current reduction and the bandwidth expansion.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.308-314
• /
• 1997

The effects of catalyst and blocking reagents(BR) on the blocking reactions of TDI and MDI in the preparation of polyurethane varnishes have been studied. It was found that certain types of catalysts, such as 1,4-diazabicyclo[2.2.2]octane(DABCO) and tetramethyl guanidine(TMG), were necessary to complete the NCO blocking reactions. Blocking rate of TMG was shown much faster than that of DABCO. Reactivity increased with the increase of TMG concentration, at least to the concentration of 1%. In case of DABCO, the 0.25% concentration of catalyst showed the highest reactivity. In order to study the steric effects of BR on the blocking reactions, phenol, p-cresol, m-cresol, o-cresol, 2,4-xylenol were used as blocking reagents. As expected, BR which has less steric hindrance showed higher reactivity. The increase in BR concentration and reaction temperature increased the productivity of polyurethanes in this reaction system.

• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.92-99
• /
• 2002

Objectives : To investigate the role of Meridian flow on acupuncture effect, we observed the therapeutic effects of electroacupuncture (EA) after Meridian blocking with pressure in arthritic rats. Methods : To make reliable and local monoarthritis, $40{\;}{\mu}l$ complete Freund's adjuvant was injected into the tibio-tarsal joint. EA was applied on acupoint GB30 while 5 Pascal pressure was added to the middle of the Gall bladder Meridian around GB31 between acupoint GB30 and arthritic foci (ipsilateral meridian blocking: IB) or opposite part of IB (contralateral part blocking: CB). To observe the change of arthritis, extension and flexion pain scores and circumferential differences were evaluated once a week. Results : EA stimulation without blocking reduced arthritic pain significantly. IB abolished the acupuncture effects and there was no statistical difference with the arthritic control group, whereas the CB group still showed the therapeutic effects of acupuncture. Conclusions : This finding strongly supports that the Meridian blocking with local pressure reduced the therapeutic effect of EA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.12
• /
• pp.1148-1151
• /
• 2005

Photovoltaic effects in organic solar cell were studied in a cell configuration of ITO/PEDOT:PSS/CuPc(20 nm)/$C_{60}$(40 nm)/BCP/Al(150 nm) at room temperature. Here, the BCP layer works as an exciton blocking layer. The exciton blocking layer must transport electrons from the acceptor layer to the metal cathode with minimal increase in the total cell series resistance and should absorb damage during cathode deposition. Therefore, a proper thickness of the exciton blocking layer is required for an optimized photovoltaic cell. Several thicknesses of BCP were made between $C_{60}$ and Al. And we obtained characteristic parameters such as short-circuit current, open-circuit voltage, and power conversion efficiency of the device under the illumination of AM 1.5.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.273-274
• /
• 2005

Photovoltaic effects in organic solar cell were studied in a cell configuration of ITO/PEDOT:PSS/CuPc(20nm)/$C_{60}$(40nm)/BCP/Al(150nm) at room temperature. Here, the BCP layer works as an exciton blocking layer. The exciton blocking layer must transport electrons from the acceptor layer to the metal cathode with minimal increase in the total cell series resistance and should absorb damage during cathode deposition. Therefore, a proper thickness of the exciton blocking layer is required for an optimized photovoltaic cell. Several thicknesses of BCP were made between $C_{60}$ and Al. And we obtained characteristic parameters such as short-circuit current, open-circuit voltage, and power conversion efficiency of the device under the illumination of AM 1.5.

• Communications for Statistical Applications and Methods
• /
• v.7 no.3
• /
• pp.741-757
• /
• 2000

In may experimental situations, whenever a block design is used, the block effect is usually considered to be fixed. There are, however, experimental situations in which it should be treated as random. The choice of a blocking arrangement for a response surface design can have a considerable effect on estimating the mean response and on the size of he prediction variance even if the experimental runs re the same. Therefore, care should be exercised in the selection of blocks. In this paper, in the presence of a random block effect, we propose a graphical method or evaluating the effect of blocking in response surface designs using cuboidal regions. This graphical method can be used to investigate how the blocking has influence on the prediction variance throughout all experimental regions of interest when this region is cuboidal, and compare the block effects in the cases of the orthogonal and non-orthogonal block designs, respectively.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.77-81
• /
• 1996

Considering the human visual masking property, a modified relationship between the activity function and the visibility threshold is developed. This leads to a novel objective appraisal method for blocking effects in a lossy subimage coding by virtue of the human visual sensitivity. The appraisal criterion is examined using a series of reconstructed images that are DCT-coded at various bit rates. Experimental results show that the presented blocking effect measure well agrees with the subjective ranking.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.430-439
• /
• 2020

The government of the Republic of Korea has introduced SNI blocking method since February 2019 to block illegal sites. Currently, this policy has been considered as a controversial policy in South Korea therefore, about 270,000 South Koreans have been calmed down by and the presidential office petition because people believe that blocking https by SNI would invasion of privacy and freedom of use of the Internet. As soon as the SNI blocking method was used, the bypass method was opened to the Internet, causing side effects. In this study, identifies the development of Internet blocking technology and the development of new technology that bypasses the technology. It also examines Internet censorship in other countries and identifies problems in blocking technology. Through this study would present policy suggestions and technical methodologies for sound Internet use.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04b
• /
• pp.20-21
• /
• 2008

Photovoltaic effects in organic solar cell were studied in a cell configuration of ITO/PEDOT:PSS/CuPd(20nm)/$C_{60}$(40nm)/BCP/Al(150nm) at room temperature. Here, the BCP layer works as an exciton blocking layer. The exciton blocking layer must transport electrons from the acceptor layer to the metal cathode with minimal increase in the total cell series resistance and should absorb damage during cathode deposition. Therefore, a proper thickness of the exciton blocking layer is required for an optimized photovoltaic cell. Several thicknesses of BCP were made between $C_{60}$ and Al. And we obtained characteristic parameters such as short-circuit current, open-circuit voltage, and power conversion efficiency of the device under the illumination of AM 1.5.