• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1523-1535
• /
• 2018

High-performance Phase-Locked Loops (PLLs) are critical for grid synchronization in grid-tied power electronic applications. In this paper, a new single-phase All Digital Phase-Locked Loop (ADPLL) is proposed. It features fast transient response and good robustness under distorted grid conditions. It is designed for Field Programmable Gate Array (FPGA) implementation. As a result, a high sampling frequency of 1MHz can be obtained. In addition, a new OSG is adopted to track the power frequency, improve the harmonic rejection and remove the dc offset. Unlike previous methods, it avoids extra feedback loop, which results in an enlarged system bandwidth, enhanced stability and improved dynamic performance. In this case, a new parameter optimization method with consideration of loop delay is employed to achieve a fast dynamic response and guarantee accuracy. The Phase Detector (PD) and Voltage Controlled Oscillator (VCO) are realized by a Coordinate Rotation Digital Computer (CORDIC) algorithm and a Direct Digital Synthesis (DDS) block, respectively. The whole PLL system is finally produced on a FPGA. A theoretical analysis and experiments under various distorted grid conditions, including voltage sag, phase jump, frequency step, harmonics distortion, dc offset and combined disturbances, are also presented to verify the fast dynamic response and good robustness of the ADPLL.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3743-3748
• /
• 2013

A tetradentate ligand of 2-phenyl-4,6-di(pyridin-2-yl)pyrimidine (L) has been synthesized and its complexes with $ZnI_2$ and CuI have been obtained by hydrothermal method. single crystal X-ray diffraction analysis indicates that ligand L coordinates with Zn(II) ions to form a simple four-coordinate di-nuclear complex, while the complexation of L with Cu(I) constructs a one-dimensional chain polymer. The existence of $I^-$ ion hampers the L to assemble grid-type complexes with Zn(II) and Cu(I). Fluorescence spectra show that the L emits blue fluorescence while its Cu(I) polymer decrease the fluorescence intensity and Zn(II) complex quenches the fluorescence.

• Korean Journal of Remote Sensing
• /
• v.5 no.1
• /
• pp.41-56
• /
• 1989

Improvement of the multichannel sea surface temperature(MCSST) software, which had been developed for the purpose of operating under mainframe computer system, was seeked in order to operate effectively in a mini computer system. CPU time and processing time, which is not a major factor under mainframe computer system, become a critical factor in real time image processing under mini computer system. Due to fixed kernel size(3$\times$4) of the old MCSST software, high spatial resolution characteristics of the original image received from satellites were apparently degraded when images are transformed into a cartesian coordinate system after geometrical distortions of the image due to earth curvature are removed. CPU and processing time were reduced to 0.13 and 0.15~0.22 comparing with the old MCSST's, respectively, by applying disk block I/O and M/T queue I/O method under VAX-11/750 computer. The high resolution quality (1.1km in AVHRR) of the processed image was guaranted using 2$\times$2 kernel size and applying moving window techniques without sacrificing CPU and processing time much.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.143-155
• /
• 2000

With the increasing needs for the integrated use of topographic and cadastral data in order to build an efficient geo-spatial information system. it is urgently necessary to research into its solution. The intention of this study is to detect error types of data and to propose adjustment methods for solving the problems caused by integrating topographic and cadastral data. For this purpose a primary integrated data model is created to link attribute data(land management system) and graphic data within cadastral information in the first step. In next, a secondary integrated data model based on the improved method is formed to coincide the graphic data of cadastral map with that of topographic map. At the first, because a numerous error types md sources caused by separate management of graphic and attribute data are easily checked, it is possible to suggest an improved method to correct these errors using the primary integrated data model. In addition, the accuracy in position and area with coordinate transformation method based on multi-block adjustment is more efficient than rubber-sheeting method. As a result, the secondary integrated data model could be built by harmonizing cadastral map with topographic map using the improved solution.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.247-259
• /
• 2000

This paper introduces a new technique that reduces the search times and Improves the accuracy of motion estimation using high temporal and spatial correlation of motion vector. Instead of using the fixed first search Point of previously proposed search algorithms, the proposed method finds more accurate first search point as to compensating searching area using high temporal and spatial correlation of motion vector. Therefore, the main idea of proposed method is to find first search point to improve the performance of motion estimation and reduce the search times. The proposed method utilizes the direction of the same coordinate block of the previous frame compared with a block of the current frame to use temporal correlation and the direction of the adjacent blocks of the current frame to use spatial correlation. Based on these directions, we compute the first search point. We search the motion vector in the middle of computed first search point with two fixed search patterns. Using that idea, an efficient adaptive predicted direction search algorithm (APDSA) for block matching motion estimation is proposed. In the experimental results show that the PSNR values are improved up to the 3.6dB as depend on the Image sequences and advanced about 1.7dB on an average. The results of the comparison show that the performance of the proposed APDSA algorithm is better than those of other fast search algorithms whether the image sequence contains fast or slow motion, and is similar to the performance of the FS (Full Search) algorithm. Simulation results also show that the performance of the APDSA scheme gives better subjective picture quality than the other fast search algorithms and is closer to that of the FS algorithm.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.48-56
• /
• 2023

The technology of Three-dimensional human posture estimation is used in sports, motion recognition, and special effects of video media. Among various methods for this, multi-view 3D human pose estimation is essential for precise estimation even in complex real-world environments. But Existing models for multi-view 3D human posture estimation have the disadvantage of high order of time complexity as they use 3D feature maps. This paper proposes a method to extend an existing monocular viewpoint multi-frame model based on Transformer with lower time complexity to 3D human posture estimation for multi-viewpoints. To expand to multi-viewpoints our proposed method first generates an 8-dimensional joint coordinate that connects 2-dimensional joint coordinates for 17 joints at 4-vieiwpoints acquired using the 2-dimensional human posture detector, CPN(Cascaded Pyramid Network). This paper then converts them into 17×32 data with patch embedding, and enters the data into a transformer model, finally. Consequently, the MLP(Multi-Layer Perceptron) block that outputs the 3D-human posture simultaneously updates the 3D human posture estimation for 4-viewpoints at every iteration. Compared to Zheng[5]'s method the number of model parameters of the proposed method was 48.9%, MPJPE(Mean Per Joint Position Error) was reduced by 20.6 mm (43.8%) and the average learning time per epoch was more than 20 times faster.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.73-78
• /
• 2015

Purpose : Under the assumption of change to the amplitude based sorting, the study will use four dimensional computed tomography imaging (4DCT) arrayed using the phase based sorting to analyze the respiratory phase difference. Materials and Methods : The study analyzed the 4DCT (4-dimensional computed tomography) images of 10 liver cancer patients that were treated with respiratory gated radiotherapy from 2015 February to March. Using RPM respiratory gating (RPM 1.7.5, Varian, USA) equipment, imaging according to respiratory cycle of phase based sorting was acquired and using a treatment planning system (Pinnacle 9.2, Philips, USA) the acquired imaging according to respiratory cycle was used to measure the abdominal movement value by respiratory cycle. The measuring point was the point where the center point of the Marker Block and the body surface met in the 50% phase image and here the coordinate values Lateral, Vertical, Longitudinal (X, Y, Z) were set as reference points, and on the X, Z plane identical to the reference point, using the identical method the Y axis coordinate value of each 0%, 30%, 40%, 50%, 60%, 80% phase images were acquired to quantitatively measure the variation of distance to the Y axis. The abdominal movement value according to respiration was applied to the theoretical model that the value decreases linearly from maximum inhalation to maximum exhalation to divide the variation of my value to predict as amplitude value by respiratory cycle and conversely the variation in amplitude was recalculated with the phase variation deviation value to analyze. Results : The deviation value between expected value and actual location was the largest in the 30% phase with 0.24 cm, and standard deviation was also the largest in 30% phase with 0.13 cm. The effective value of the deviation value derived from the average of the deviation squared value of each patient appeared as minimum 0.7 cm, maximum 0.18 cm, average 0.12 cm, and standard deviation 0.4 cm. Also by dividing the actual movement distance value with the peak expiration value then converting it into %Phase, the deviation value with actual phase 16.5% in 30% phase, 10.0% and 40% phase, 10.0% and 60% phase, 15.4% and 80% phase, and overall average about 13%, and arraying based on amplitude, phase shift occurred and further it was from peak expiration the chance of deviation occurrence was increasingly measured. Conclusion : Based on the results of the study there were differences between value acquired based on theoretical model and actual value. Therefore in respiratory gated radiotherapy using external surrogates, there needs to be establishment of respiration gated radiation system that avoids the combination of two Sorting methods considering that there will be occurrence of treatment and corresponding clinical differences due to the phase difference that occur due to the Amplitude based Phase Sorting.