• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2524-2532
• /
• 1999

In this paper, we present a new buffer pool management scheme designed for video type news objects to build a cost-effective News On Demand storage server for serving users requests beyond the limitation of disk bandwidth. In a News On Demand Server where many of users request for video type news objects have to be serviced keeping their playback deadline, the maximum numbers of concurrent users are limited by the maximum disk bandwidth the server provides. With our proposed buffer cache management scheme, a requested data is checked to see whether or not it is worthy of caching by checking its average arrival interval and current disk traffic density. Subsequently, only granted news objects are permitted to get into the buffer pool, where buffer allocation is made not on the block basis but on the object basis. We evaluated the performance of our proposed caching algorithm through simulation. As a result of the simulation, we show that by using this caching scheme to support users requests for real time news data, compared with serving those requests only by disks, 30% of extra requests are served without additional cost increase.

• Journal of Korea Foundry Society
• /
• v.20 no.2
• /
• pp.104-109
• /
• 2000

Three different white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their abrasion wear behavior in as-cast and heat-treated conditions. The specimens were produced using a 15㎏-capacity high frequency induction furnace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into Y-block pepset molds. Three combinations of the alloying elements were selected so as to obtain the different types of carbides : 3%C-10%Cr-5%Mo-5%W(alloy No. 1: $M_7C_3$ and $M_6C$), 3%C -10%V-5%Mo-5%W(alloy No. 2: MC and $M_2C$) and 3%C-17%Cr-3%V(alloy No. 3: $M_7C_3$ only). A scratching type abrasion test was carried out in the states of as-cast(AS), homogenizing(AH), air-hardening(AHF) and tempering(AHFT). First of all, the as-cast specimens were homogenized at $950^{\circ}C$ for 5h under the vacuum atmosphere. Then, they were austenitized at $1050^{\circ}C$ for 2h and followed by air-hardening in air. The air-hardened specimens were tempered at $300^{\circ}C$ for 3h. 1 ㎏ load was applied in order to contact the specimen with abrading wheel which was wound by 120 mesh SiC paper. The wear loss of the test piece(dimension: $50{\times}50{\times}5$ mm) was measured after one cycle of wear test and this procedure was repeated up to 8 cycles. In all the specimens, the abrasion wear loss was found to decrease in the order of AH, AS, AHFT and AHF states. Abrasion wear loss was lowest in the alloy No.2 and highest in the alloy No.1 except for the as-cast and homogenized condition in which the alloy No.3 showed the highest abrasion wear loss. The lowest abrasion wear loss of the alloy No.2 could be attributed to the fact that it contained primary and eutectic MC carbides, and eutectic $M_2C$ carbide with extremely high hardness. The matrix of each specimen was fully pearlitic in the as-cast state but it was transformed to martensite, tempered martensite and austenite depending upon the type of heat-treatment. From these results, it becomes clear that MC carbide is a significant phase to improve the abrasion wear resistance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.247-254
• /
• 1991

Mackerel purse seine fishery is one of the most important fisheries in Korea and its annual mean catch from 1982 to 1988 is 350 thousand tons. Between 1982 and 1988, the characteristics of catch at 5 sectors of the sea area was analyzed according to operating sea block and the catch by fishes based on the data obtained from daily report of fishing condition that had been made out by 48 Korean fishing boats engaged in the fishery of purse seine. In these 5 sectors of the sea area, catch per net hauling in the coastal area of Cheju Island is less than that in the other sectors. Accordingly, the shape of fishing gear during operation has been measured to analyzed the deformation of net shape caused by the bottom current. (The lunar calender is used in the paper) The results obtained are as follows; The average CPUE of purse seines is 31.6 tons and it is higher from October to April than that from May to September. In the 5 purse seine fishing grounds, the ratio of net haul in the coastal sea area of cheju Island is 42.4% and it is the highest level, but the CPUE is 25.7 tons which is relatively low level. Each CPUE in the sea areas is significant differences with 1% level. Index of seasonal variation of mackerel CPUE from May to October is lower than the standard value, whereas index from November to January is higher. The diameter of circle by net shooting becomes shorter to the minimum caused by the bottom current during loose set, becomes narrower and the efficiency of fish encirclement becomes lower. The shape of leadline by bottom current becomes long oval type along with current direction in the tight set, while it becomes long oval type in the direction of a right angle to the current direction and the enclosed area is reduced hurriedly, and the deformation of net is most serious in the loose set.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.35-42
• /
• 2015

Grouting method has been widely used for the ground improvement and stabilization: mostly to block or control the ground water in the early years and to improve the ground, repair the structure in recent years, ever increasing its use. Despite many advantages so far, the existing grouting method also has some shortcomings including uncertain permeation of grouting with gravity type if the voids between the soil particles are narrow, and problems due to the relaxation of the neighboring ground when injected using injection pressure. As an alternative, a vibration injection method with constant amplitude and frequency has been developed in recent years, with the vibration grouting being reported to have a permeability increasing effect of grout material compared with the positive pressure injection type. Accordingly, the purpose of this study is to investigate the improvement effect of the vibration grouting that applies short-period vibration energy by varying vibration cycle, vibration time and ground conditions to evaluate the strength enhancing effect of grouting materials, expansion effect of grouting body, ground improvement effect of the grouting and the penetration characteristics of the rock joint. The findings of this study show the improved compressive strength of grout, expansion of grouting body and increased penetration rate, according to the vibration compared with non-vibration under the loose soil condition.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.49-54
• /
• 2022

Rapid changes in modern society after the COVID-19 have highlighted artificial intelligence talent as a major influencing factor in determining national competitiveness. Accordingly, the Ministry of Education planned a large-scale SW·AI camp education project to develop the digital capabilities of 4th to 6th grade elementary school students and middle and high school students who are in a vacuum in artificial intelligence education. Therefore, this study aims to develop a camp-type SW·AI education program for students in grades 4-6 of elementary school so that students in grades 4-6 of elementary school can acquire basic knowledge in artificial intelligence. For this, the meaning of SW·AI education in elementary school is defined and SW·AI contents to be dealt with in elementary school are: understanding of SW AI, 'principle and application of SW AI', and 'social impact of SW AI' was set. In addition, an attempt was made to link the set elements of elementary school SW AI education and learning with related subjects and units of textbooks currently used in elementary schools. As for the program used for education, entry, a software coding learning tool based on block coding, is designed to strengthen software programming basic competency, and all programs are designed to be operated centered on experience and experience-oriented participants in consideration of the developmental characteristics of elementary school students. In order for SW·AI education to be organized and operated as a member of the regular curriculum, it is suggested that research based on the analysis of regular curriculum contents and in-depth analysis of SW·AI education contents is necessary.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.515-519
• /
• 2022

In this paper, we propose the development of a high-sensitivity entry-level nuclide analysis module. The proposed measurement sensor module consists of an electronic driving circuit for nuclide analysis resolution, prototype production with nuclide analysis function, and GUI development applied to prototypes. The electronic part driving circuit for nuclide analysis resolution is divided into nuclide analysis resolution process by the electronic part driving circuit block diagram, MCU circuit design used for radiation measurement, and PC program design for Spectrum acquisition. Prototyping with nuclide analysis function is made by adding a 128×128 pixel OLED display, three buttons for operation, a Li-ion battery, and a USB-C type port for charging the battery. The GUI development department applied to the prototype develops the screen composition such as the current time, elapsed measurement time, total count, and nuclide Spectrum. To evaluate the performance of the proposed measurement sensor module, an expert witness test was conducted. As a result of the test, it was confirmed that the calculated result by applying the resolution formula to the Spectrum (FWHM@662keV) obtained using the Cs-137 standard source in the nuclide analysis device had a resolution of 17.77%. Therefore, it was confirmed that the nuclide analysis resolution method proposed in this paper produces improved performance while being cheaper than the existing commercial nuclide analysis module.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.189-196
• /
• 2023

This paper analyzes the level of satisfaction of two groups of teachers who were educated about artificial intelligence using App Inventor. The participants were 13 pre-service and 9 in-service elementary school teachers and the data was collected using a questionnaire. As a result of the study, in-service teachers were all more satisfied than pre-service teachers in terms of interest, difficulty, and participation in the education. In addition, the questions investigating whether education helped motivate learning of artificial intelligence and whether there is a willingness to apply it to elementary classes in the future were also more positive for in-service teachers than for pre-service teachers. In general, pre-service teachers had somewhat more negative views than in-service teachers, but they were more positive than in-service teachers in terms of whether the education helped improve their understanding of artificial intelligence and whether they were willing to participate in additional education. Analysis of the Mann-Whitney test to see if there was a significant difference in satisfaction between the two groups showed no significance. This may be because most of the students in the two groups already had block-type or text-type programming experience, so they were able to participate in the education without any special resistance or difficulty with App Inventor, resulting in high levels of satisfaction from both groups. The results of this study can provide basic data for the future development and operation of programs for artificial intelligence education for both pre-service and in-service elementary school teachers.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.675-683
• /
• 2022

Blockchain, which is the basis of virtual assets such as cryptocurrency, is receiving great attention as one of the cornerstone technologies of the 4th industrial revolution. Blockchain is a technology that can fundamentally change our lives not only in finance, but also in politics, logistics, and culture. However, it shows lower-than-expected usability because it is complicated to learn and is continuously being developed. In this study, we tried to investigate whether the Technology Acceptance Model(TAM) of virtual assets can be changed through education on the underlying technology, blockchain. A video-based online experiment was conducted with a total of 103 participants and examined how the type of training(positive, negative) and measurement timing(before, after) affect perceived usefulness, perceived ease of use, acceptance, which are TAM variables, and trust and security, which are related to blockchain characteristics. As a result of the experiment, interactions were found in all dependent variables according to the type of education and measurement timing. Specifically, groups that received negative education had no difference in all variables before and after, but it was found that groups that received positive education showed an increase afterwards. Through this, it can be seen that the effect of education based on the anchoring effect is also shown in the intention to use virtual assets using block chain technology, suggesting that the intention to use blockchain related technology can be increased through positive education.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.427-438
• /
• 2023

We carried out a geological survey to classify the types of mass movement in Danyang Geopark (where various rock types are distributed) and analyzed the mechanical and hydraulic characteristics of landslide materials using a series of laboratory tests. Debris flows occurred in areas of limestone/marble, shale, and porphyroblastic gneiss, and limestone/marble landslides were distinguished from the others through the presence of karren topography. Soil tests showed that soil derived from weathered gneiss, which has a higher proportion of coarse grains, has a higher friction angle, lower cohesion, and larger hydraulic conductivity than soils from areas of limestone/marble, and shale. Rock failure mass movements occurred in areas of phyllite, sandstone, and conglomerate and were subdivided into plane failure, block-fall, and boulder-fall types in areas of phyllite, sandstone, and conglomerate, respectively. The shear strength of phyllite is much lower than that of the other types of rock, which have similar rock quality. The slake durability index of the conglomerate is similar to that of the other rock types, which have similar degrees of weathering, but differential weathering of the matrix and clasts was clearly observed when comparing the samples before and after the test. This study can help establish appropriate reinforcement and disaster prevention measures, which depend on the type of mass movement expected given the geological characteristics of an area.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.37-46
• /
• 2007

The C-shaped canal system is an anatomical variation mostly seen in mandibular second molars, although it can also occur in maxillary and other mandibular molars. The main anatomical feature of C-shaped canals is the presence of fins or web connecting the individual root canals. The complexity of C-shaped canals prevents these canals from being cleaned, shaped, and obturated effectively during root canal therapy, and sometimes it leads to an iatrogenic perforation from the extravagant preparation. The purpose of this study was to provide further knowledge of the anatomical configuration and the minimal thickness of dentinal wall according to the level of the root. Thirty extracted mandibular second molars with fused roots and longitudinal grooves on lingual or buccal surface of the root were collected from a native Korean population. The photo images and radiographs from buccal, lingual, apical direction were taken. After access cavity was prepared, teeth were placed in 5.25% sodium hypochlorite solution for 2 hours to dissolve the organic tissue of the root surface and from the root canal system. After bench dried and all the teeth were embedded in a self-curing resin. Each block was sectioned using a microtome (Accutom-50, Struers, Denmark) at interval of 1 mm. The sectioned surface photograph was taken using a digital camera (Coolpix 995, Nikon, Japan) connected to the microscope. 197 images were evaluated for canal configurations and the minimal thickness of dentinal wall between canal and external wall using 'Root Thickness Gauge Program' designed with Visual Basic. The results were as follows : 1. At the orifice level of all teeth, the most frequent observed configuration was Melton's Type C I (73%), however the patterns were changed to type C II and C III when the sections were observed at the apical third. On the other hand, the type C III was observed at the orifice level of only 2 teeth but this type could be seen at apical region of the rest of the teeth. 2. The C-shaped canal showed continuous and semi-colon shape at the orifice level, but at the apical portion of the canal there was high possibility of having 2 or 3 canals 3. Lingual wall was thinner than buccal wall at coronal, middle, apical thirds of root but there was no statistical differences.