• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.35-40
• /
• 2016

OBJECTIVES : The objective of this study is to analyze the nonlinear behavior of block pavements using multi-load level falling weight deflectometer (FWD) deflections. METHODS : Recently, block pavements are employed not only in sidewalks, but also in roadways. For the application of block pavements in roadways, the structural capacities of subbase and subgrade are important factors that support the carry traffic load. Multi-load level FWD testing was conducted on block pavements to analyze their nonlinear behavior. The deflection ratio due to the increase in load was analyzed to estimate the nonlinearity of block pavements. Finite element method with nonlinear soil model was applied to simulate the actual nonlinear behavior of the block pavement under different levels of load. RESULTS : The results of the FWD testing show that the center deflections in block pavements are approximately ten times greater than that in asphalt pavements. The deflection ratios of the block pavement due to the increase in the load range from 1.2 to 1.5, indicating that the deflection increased by 20~50%. The material coefficients of the nonlinear soil model were determined by comparing the measured deflections with the predicted deflections using the finite element method. CONCLUSIONS : In this study, the nonlinear behavior of block pavements was reviewed using multi-load level FWD testing. The deflection ratio proposed in this study can estimate the nonlinearity of block pavements. The use of nonlinear soil model in subbase and subgrade increases the accuracy of predicting deflections in finite element method.

• 한국조경학회지
• /
• 제34권2호
• /
• pp.18-25
• /
• 2006

This study aims to measure and to analyze the thermal environment characteristics of the various permeable pavement materials such as grass pavement (GREEN BLOCK PARK), stone and grass pavement (GREEN BLOCK STEP), stone pavement (GREEN BLOCK MOSAIC) and wood pavement (WOOD BLOCK) under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, changes of the temperature on each pavement layer, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 5, 2005, $34.0^{\circ}C$) of the you. Some of main findings are: 1) The heat environment was worse on the wood pavements than on the stone pavement. This is mainly due to the low albedo of the wood pavements (0.37) while the albedo value of stone pavements is 0.41. Small heat capacity of the wood pavements also contributes to this difference. 2) The heat environment was worse on the stone pavements than on the turf pavements. This was mainly due to the evapotranspiration of the plant growth layer of the turf pavements. 3) The peak surface temperature was the highest on the wood pavements ($56.1^{\circ}C$). The peak surface temperatures on the stone pavements, the stone-grass pavements and the grass pavements were $43.1^{\circ}C,\;40.1^{\circ}C\;and\;37.9^{\circ}C$, respectively. 4) To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.115-124
• /
• 2008

본 연구에서는 단지 내 아파트 블록포장 50곳의 현장조사를 통하여 주요 파손형태를 조사하여 공용성을 평가하였다. 공용성 평가결과에 따르면, 조사대상지역에서 9년의 공용연수를 가진 블록포장의 유지관리지수는 7.9에서 8.9사이이며, 블록포장의 상태는 양호한 것으로 나타났다. 따라서 건설교통부 '보도설치 및 관리지침'에 10년으로 제시된 보도의 교체주기는 검토할 필요가 있다는 결론을 도출하였다. 또한 블록포장의 공용성을 객관적으로 평가하기 위해서 일본블록포장협회에서 제시한 유지관리 기준과 건설교통부 '보도설치 및 관리지침'의 유지관리기준을 조합하여 국내 현실에 적합한 유지관리기준을 제시하였다. 외국과 비고할 때 국내의 블록포장의 기준에는 내구성 관련기준과 줄눈채움재 및 모래안정층의 품질관리 기준이 명확히 제시되어 있지 않다. 따라서 블록포장의 기대수명과 유지관리비용을 줄이기 위하여, 본 연구에서는 국내외 기준을 비교하여 이러한 기준들을 국내기준에 포함시킬 것을 제안하였다.

• 토지주택연구
• /
• 제5권4호
• /
• pp.297-303
• /
• 2014

최근, 공동주택 단지내 투수성 포장 및 블록포장 등과 같은 포장이 많이 시공되고 있으나 품질관리와 공용성 평가에 관한 기준이 미비하여 하자 교체 및 교체주기 시기 결정 등에 어려움이 많은 실정이다. 따라서, 본 연구에서는 공동주택에 많이 적용되고 있는 투수성포장 및 블록 포장의 합리적 선정기준을 제안하기 위해 교체주기, 초기 공사비, 유지교체비용 등을 고려한 포장공법별 생애주기 비용 분석(LCCA)을 실시하였다. 생애주기비용 분석결과는 교체주기 20년이상인 인터록킹 콘크리트 블록포장이 최적의 대안이지만, 보도 포장의 교체기준 10년을 기준으로 하였을 경우 최적의 대안은 일반적인 아스팔트 콘크리트 포장임을 알 수가 있다. 따라서, 교체주기가 대안의 선정 및 생애주기비용 분석에 많은 영향을 미치므로 향후, 교체주기의 객관적인 정량화에 필수적인 공용성 지수 개발이 필요하다.

• 한국환경복원기술학회지
• /
• 제15권4호
• /
• pp.97-109
• /
• 2012

In this study this writer carried out survey and analysis on paving materials of children's playground for 40 apartment buildings with each of such apartment containing 100 households or more and which were built within last 15 years in Jeonju. As a result of analysis of such questionnaires this author could draw following conclusion. In the second half of 1990s pavement materials which were used mainly were sand and during first half of 2000s they were mixture of sand and rubber block and around 2010 they were rubber block or rubber chip pavements. Such change seemed to be a result of consideration of convenience for management and safety rather than in deference to diversity of children's outing places. Survey on the current status of pavement materials revealed need for directives by the main entity for management and their firm resolve for its implementation. And there was need for their coping with problems such as pressure of treading or lack of it or poor condition of drainage in case of sand and phenomena of pitting or dipping down, discoloring and poor drainage in case of rubber chips and rubber blocks and loosening of gaps between rubber blocks etc. Result of analysing status of usage disclosed that 50.4% of the respondents to questionnaires stated that they had experience of accidents. With regard to cause of such accident it was found that 47.5% of accidents were attributable to play facilities and 19.5% were due to paving (floor) materials thus it was disclosed that not only play facilities but also pavement materials had impact on safety for the children. Result of analysing level of satisfaction with pavement materials showed that pavement by rubber chips and blocks had higher level of satisfaction which was reflection of fear on cleanness of sand. In terms of preference rubber chip and rubber block pavements were highest and the next one was sand. Reason for such preference was based on concern with safety.

• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.75-80
• /
• 2017

도심 홍수 및 물순환 왜곡을 해결하기 위한 대표적 저영향개발기술 중 하나인 투수 블록포장이 포장시설로서 활발하게 적용되고 있다. 하지만 국내의 경우 설계법이 잘 정립되어있지 않고 국외에선 AASHTO 93 연성포장 설계법을 구조설계법으로 적용하고 있긴 하나 투수성 포장재료의 상대강도계수에 대한 정보가 부족하여 다양한 재료에 대한 설계적용이 어렵다는 단점이 있다. 이에 따라 본 연구에선 평판재하시험을 통해 투수 블록포장 재료의 상대강도계수를 산정하는 방법을 제시하고, 투수성 포장 실증현장에서 평판재하시험을 실시하여 이를 산정하였다. 산정된 개립도 골재와 투수 블록포장 표층의 상대강도계수는 전체적으로 기존의 값과 유사한 경향을 나타냈다. 본 연구에서 제시한 방법을 사용하여 향후 설계를 위한 투수 블록포장 재료의 상대강도계수를 산정할 수 있을 것으로 판단된다.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.66-71
• /
• 2015

Safety, resilience and comfort of pedestrian were assessed by the British Pendulum Test and SB/GB factor test at 8 kinds of sidewalk pavement. Sidewalk paving materials were normal concrete, porous concrete, concrete block, soil concrete, asphalt, rubber chip/resin mixture, wood chip/resin mixture and floor tile. In addition, a survey was conducted to investigate the perception of pedestrians on the sidewalk paving material. As a result, while the skid resistance value was measured in the most 60BPN above, the floor tile showed a low value of about 30BPN. The ratios of SB factor to GB factor of the elastic pavements(rubber/resin mixture and wood chip/resin mixture) appeared to be relatively large when compared with those of the conventional sidewalks. The survey showed that respondents perceived as more safe and comfortable elastic pavements compared to conventional pavements. Approximately 50% of respondents answered that hardened soil pavement was the most environmentally friendly.

• 한국환경과학회지
• /
• 제17권5호
• /
• pp.573-580
• /
• 2008

This study aims to measure and to analyze the characteristics of thermal environment of the various permeable pavement materials such as a break stone pavement (Green block cubic), soil protection pavement (Soil tector), soil cement pavement and ceramic brick pavement under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 9, 2006, $37.1^{\circ}C$) of the year. The albedo was the highest on the break stone pavement(0.8) from 12:00 to 14:00. The albedo of the ceramic brick pavement, a soil tector pavement and soil cement pavement were 0.35, 0.29 and 0.27 from 12:00 to 14:00, respectively. The peak surface temperature and long wave radiation was the highest on the soil protection pavements($56.6^{\circ}C$/627 W/$m^2$). The peak surface temperatures and long wave radiation on the ceramic brick pavement, a stone brick pavement and soil cement pavement were $51.7^{\circ}C$/627 W/$m^2$, $48.8^{\circ}C$/607 W/$m^2$ and $45.9^{\circ}C$/582 W/$m^2$, respectively. The heat environment was better on the break stone pavement than on the other pavements. This is mainly due to the high albedo of the break stone pavement(0.8) while the albedo value of a ceramic brick pavement, a soil tactor pavement and soil cement pavement were 0.35. 0.29 and 0.27. Large heat capacity($2,629kJ/m^3{\cdot}K$) of the stone brick pavements also contributes to this difference. The heat environment was better on the soil cement pavement than the soil tector pavement. This is mainly due to the evaporation of the soil cement pavement while the active evaporation of the soil tactor pavement was not continued after two days from the rainfall event. To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.29-30
• /
• 2018

Recent impervious pavements on roads and sidewalks cause rainwater to not penetrate into the ground, deplete groundwater, or flood the rivers, causing urban flood damage. In order to solve these problems, the amount of installed pitcher block is increasing, but the existing pitcher block is made with cement base and causes many problems. In the cement permeable block, the efflorescene phenomenon occurs due to the acid component, and the pore of the permeable block is clogged and the permeability is lost. As a result, the service life of the pitcher block is shortened and the replacement period is shortened. The purpose of this study is to analyze the basic properties of polymer concrete by replacing cement with polymer in order to solve the problem of cement - based concrete permeable block.

• 한국농공학회논문집
• /
• 제54권2호
• /
• pp.157-166
• /
• 2012

Most of the roads are paved with impermeable materials such as asphalt concrete and cement concrete, and in the event of heavy rainfall, rainwater directly flows into river through a drainage hole on the pavement surface. This large quantity of rainwater directly spilled into the river frequently leads to the flooding of urban streams, damaging lowlands and the lower reaches of a river. In recent years there has been a great deal of ongoing research concerning water permeability and drainage in pavements. Accordingly, in this research, a porous polymer concrete was developed for permeable pavement by using unsaturated polyester resin as a binder, recycled aggregate as coarse aggregate, fly ash and blast furnace slag as filler, and its physical and mechanical properties were investigated. Also, 3 types of permeable polymer block by optimum mix design were developed and rainfall runoff reduction effects by permeability pavement using permeable polymer block were analyzed based on hydraulic experimental model. The infiltration volume, infiltration ratio, runoff initial time and runoff volume in permeability pavement with permeable polymer block of $300{\times}300{\times}80$ mm were evaluated for 50, 100 and 200mm/hr rainfall intensity.