• ETRI Journal
• /
• v.37 no.6
• /
• pp.1176-1187
• /
• 2015

This work proposes a highly efficient sensorless motor driver chip for various permanent-magnet synchronous motors (PMSMs) in a wide power range. The motor driver chip is composed of two important parts. The digital part is a sensorless controller consisting mainly of an angle estimation block and a speed control block. The analog part consists of a gate driver, which is able to sense the phase current of a motor. The sensorless algorithms adapted in this paper include a sliding mode observer (SMO) method that has high robust characteristics regarding parameter variations of PMSMs. Fabricated SMO chips detect back electromotive force signals. Furthermore, motor current-sensing blocks are included with a 10-bit successive approximation analog-to-digital converter and various gain current amplifiers for proper sensorless operations. Through a fabricated SMO chip, we were able to demonstrate rated powers of 32 W, 200 W, and 1,500 W.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.935-944
• /
• 2011

As a growing number of individuals are exposed to surveillance cameras, the need to prevent captured videos from being used inappropriately has increased. Privacy-related information can be protected through video encryption during transmission or storage, and several algorithms have been proposed for such purposes. However, the simple way of evaluating the security by counting the number of brute-force trials is not proper for measuring the security of video encryption algorithms, considering that attackers can devise specially crafted attacks for specific purposes by exploiting the characteristics of the target video codec. In this paper, we introduce a new attack for recovering contour information from encrypted H.264 video. The attack can thus be used to extract face outlines for the purpose of personal identification. We analyze the security of previous video encryption schemes against the proposed attack and show that the security of these schemes is lower than expected in terms of privacy protection. To enhance security, an advanced block shuffling method is proposed, an analysis of which shows that it is more secure than the previous method and can be an improvement against the proposed attack.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.663-674
• /
• 2020

In this study, partially restrained beam-column moment joints in the weak-axis direction were examined using three large-scale specimens subject to cyclic loading in order to assess the seismic resistance of the joints of low-rise steel structures and to propose joint details based on the test results. The influence of different number of bolts on the moment joints was thoroughly investigated. It was found that the flexural capacity of the joints in the direction of weak axis was highly dependent on the number of high-tension bolts. In addition, even though the flexural connections subjected to cyclic loading was perfectly designed in accordance with current design codes, severe failure mode such as block shear failure could occur at beam flange. Therefore, to prevent excessive deformation at bolt holes under cyclic loading conditions, the holes in beam flange need to have larger bearing capacity than the required tensile force. In particular, if the thickness of the connecting plate is larger than that of the beam flange, the bearing capacity of the flange should be checked for structural safety.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.209-213
• /
• 2022

Key exchange protocol (KEP) is an essential setup to secure authenticates transmission among two or more users in cyberspace. Digital files protected and transmitted by the encryption of the files over public channels, a single key communal concerning the channel parties and utilized for both to encrypt the files as well as decrypt the files. If entirely done, this impedes unauthorized third parties from imposing a key optimal on the authorized parties. In this article, we have suggested a new KEP term as isokey interchange protocol based on generalization of modern mathematics term as isomathematics by utilizing isonumbers for corresponding isounits over the Block Upper Triangular Isomatrices (BUTI) which is secure, feasible and extensible. We also were utilizing arithmetic operations like Isoaddition, isosubtraction, isomultiplication and isodivision from isomathematics to build iso-key interchange protocol for network communication. The execution of our protocol is for two isointegers corresponding two elements of the group of isomatrices and cryptographic performance of products eachother. We demonstrate the protection of suggested isokey interchange protocol against Brute force attacks, Menezes et al. algorithm and Climent et al. algorithm.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3165-3177
• /
• 1999

With the recent outstanding advance in computer software and hardware, a number of researches to enhance the manufacturing speed and the process accuracy has been undertaken in many fields of textile industry. Frequently issued problems of automatic recognition of textile wrinkles in a grey scale image are as follows. First, changes in grey level intensity of wrinkles are so minute. Second, as both colors and patterns in a grey scale image appear in grey level intensity, it is difficult to sort out the wrinkle information only. Third, it is also difficult to distinguish grey level intensity changed by wrinkles from those by uneven illumination. This paper suggests a method of automatic recognition of textile wrinkles that can solve above problems concerned with wrinkles, which can be raised in a manufacturing process as one of errors. In this paper, we first make the outline of wrinkles distinctly, apply the block matching algorithm used in motion estimation, and then estimate block locations of target images corresponding to blocks of standard images with the assumption that wrinkles are kind of textile distortions caused by directional forces. We plot a "wrinkle map" considering distances between wrinkles as depths of wrinkles. But because mismatch can occur by different illumination intensity and changes in tensions and directions of the force, there are also undesirable patterns in the map. Post processing is needed to filter them out and get wrinkles information only. We use average grey level intensity of wrinkle map to recognize wrinkles. When it comes to textile with colors and patterns, previous researches on wrinkles in grey scale image hasn't been successful. But we make it possible by considering wrinkles as distortion.istortion.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.182-191
• /
• 2015

The automatic dependent surveillance - broadcast (ADS-B) system which is a core system of aviation system block upgrade is designed and implemented. The ADS-B system consists of the 4 blocks and 10 units, and filtering algorithm is applied to the implemented ADS-B system. To evaluate a performance of the implemented ADS-B system, real aircraft position data is used and compared reliable radar data. The comparison results show that average position difference of 99.57 m. In addition, comparisons of aircraft position data between the implemented ADS-B system employing filtering algorithm and the conventional ADS-B system under various situations are carried out, such as aircraft turning, taking off, landing, and cruising. The comparison results show that average position difference of 8.02 m.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.332-341
• /
• 2013

H-shaped amphiphilic pentablock copolymers $(PSt)_2-b-PCL-b-PEO-b-PCL-b-(PSt)_2$ was synthesized via chemoenzymatic method by combining enzyme-catalyzed ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (${\varepsilon}$-CL) and atom transfer radical polymerization (ATRP) of styrene. By this process, we obtained copolymers with controlled molecular weight and low polydispersity. The structure and composition of the obtained copolymers were characterized by nuclear magnetic resonance (NMR), gel permeation chromatography (GPC) and infrared spectroscopy analysis (IR). The crystallization behavior of the copolymers was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The crystallization behavior of the H-shaped block copolymers demonstrated a PCL dominate crystallization. The self-assembly behavior of the copolymers was investigated in aqueous media. The hydrodynamic diameters of the copolymer micelles in aqueous solution were measured by dynamic light scattering (DLS). The morphology of the copolymer micelles was observed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The hydrodynamic diameters of spherical micelles declined gradually with the increase of the hydrophobic chain lengths of the copolymers. The critical micelle concentration (CMC) values were determined from fluorescence emission, and it was found that the CMCs decreased with an increase of PSt hydrophobic block lengths.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.69-75
• /
• 2018

The key technology of Industry 4.0, Smart factory is evaluated as the driving force of our economic development hereafter and a lot of researches have been established. Various entities including devices, products and managers exist in smart factory, but roles of these entities may be continuous or variable and can become extinct not long after. Existing methods for access control are not suitable to adapt to the variable environment. If we don't consider certain security level, important industrial data can be the targets of attacks. We need a new access control method satisfying desired level of efficiency and security without excessive system loads. In this paper, we propose a new RBAC-PAC which extend AC defined for PKC to the authority attribute of roles. We distribute PACs for roles through block chain method to provide the efficient access control. We verified that RBAC-PAC is more efficient in the smart factory with large number of entities which need a frequent permission update.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.618-622
• /
• 2004

The vibration test system of SITC(Satellite Integration and Test Center) at KARI(Korea Aerospace Research Institute) has been used successfully for the environmental tests of a majority of korean space programs, such as KOMPSAT, Koreasat KITSAT, STSAT and KSR program since 1996. To meet the recent needs of large size test facility available for the vibrational tests of the huge launch vehicles and tole-communication satellites which will be developed in the near future, KARI undertook to construct the large size multi-electromagnetic shaking system with 3 $\times$ 3m head expander system. The new system will consist of three electromagnetic shakers which has 160 kN thrust force individually, and be able te sustain up to 8 tons test load and 300 kNm overturing moment. And to avoid the tremendous cost and effort to furnish the seismic block with large size and weight, it will adopt a Lin-E-Air type configuration with which the seismic block is less severe than a Solid-Truninon type. In addition, to fulfill the strong requirement of high overturning moment the additional guidance system including a central bearing system on a central support and several pad bearings around the head expander body is now considered. This paper describes the configuration and the design parameters of the multi-shaking system which is under development by KARI's engineers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.77-83
• /
• 2014

Prestressed concrete girder bridge has been one of the most widely used bridges in the world because of its excellent construction feasibility, economic efficiency, serviceability, and safety. In certain situations, the prestressing tendon is supposed to be bent by the construction error and the radius of curvature at the continuous joint of PSC girders, and this leads to the loss of prestressing force. However, this kind of prestress loss is not considered in the design and construction processes. This study proves that the prestress loss occurs at the continuous joint due to the local bending of tendon by the construction error or the radius of curvature. Also, a method that can reduce this type of prestress loss is proposed, and proved by the experiment. The result shows that maximum 10% of prestress loss occurs at the continuous joint and the proposed block-out method can reduce the prestress loss ratio by maximum 5%, approximately. This means that the block-out method can enhance the prestressing efficiency of continuous PSC girder bridges.