• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.562-571
• /
• 2010

Forward error correction (FEC) coding schemes using iterative soft decision detection (SDD) information are mandatory in most of the next generation wireless communication system, in order to combat inevitable channel imparirnents. At the same time, space-time block coding (STBC) schemes are used for the diversity gain. Therefore, SDD information has to be fed into FEC decoder. In this paper, we propose efficient SDD methods for turbo-coded STBC system using high order modulation such as QAM. We present simulation results of various SDD schemes for turbo-coded STBC systems, and show that the proposed methods can provide almost approximating performance to maximum likelihood detection with much less computational load.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.427-430
• /
• 2005

A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.865-872
• /
• 2006

Cooperative communications (CC) have received a great deal of attention recently as an efficient way to obtain the spatial diversity without physical arrays. Thus, space-time block codes (STBC) which are well-known for use in co-located multi-antenna systems can be still utilized for single-antenna users in a distributed fashion. In this paper, we propose a cooperative signaling structure using the $\frac{3}{4}$-rate STBC and derive closed-form BER expression which takes the effect of network geometry and transmit power constraint into account. A variety of simulated and numerical results demonstrated the cooperation considerably outperforms the direct transmission when partners are located in appropriate positions.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.489-504
• /
• 2013

Software safety for nuclear reactor protection systems (RPSs) is the most important requirement for the obtainment of permission for operation and export from government authorities, which is why it should be managed with well-experienced software development processes. The RPS software is typically modeled with function block diagrams (FBDs) in the design phase, and then mechanically translated into C programs in the implementation phase, which is finally compiled into executable machine codes and loaded on RPS hardware - PLC (Programmable Logic Controller). Whereas C Compilers are fully-verified COTS (Commercial Off-The-Shelf) software, translators from FBDs to C programs are provided by PLC vendors. Long-term experience, experiments and simulations have validated their correctness and function safety. This paper proposes a behavior-preserving translation from FBD design to C implementation for RPS software. It includes two sets of translation algorithms and rules as well as a prototype translator. We used an example of RPS software in a Korean nuclear power plant to demonstrate the correctness and effectiveness of the proposed translation.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.663-674
• /
• 2020

In this study, partially restrained beam-column moment joints in the weak-axis direction were examined using three large-scale specimens subject to cyclic loading in order to assess the seismic resistance of the joints of low-rise steel structures and to propose joint details based on the test results. The influence of different number of bolts on the moment joints was thoroughly investigated. It was found that the flexural capacity of the joints in the direction of weak axis was highly dependent on the number of high-tension bolts. In addition, even though the flexural connections subjected to cyclic loading was perfectly designed in accordance with current design codes, severe failure mode such as block shear failure could occur at beam flange. Therefore, to prevent excessive deformation at bolt holes under cyclic loading conditions, the holes in beam flange need to have larger bearing capacity than the required tensile force. In particular, if the thickness of the connecting plate is larger than that of the beam flange, the bearing capacity of the flange should be checked for structural safety.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.565-570
• /
• 2021

A soft-decision decoding scheme of a channel code for correcting an error occurring in a receiver of a digital communication systems is proposed. A method for efficiently decoding by use of the linear and arithmetic structure of linear block codes is presented. In this way, the probability of decoding errors has been reduced. In addition, it is possible to reduce the complexity of decoding as well. Sufficient conditions for achieving optimal decoding has been derived. As a result, the sufficient conditions enable efficient search for candidate codewords. With the proposed decoding scheme, we can effectively perform the decoding while lowering the block error probability.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.25-36
• /
• 2023

Nuclear power plants have recognized the importance of nuclear cybersecurity. Based on regulatory guidelines and security-related standards issued by regulatory agencies around the world including IAEA, NRC, and KINAC, nuclear operating organizations and related systems manufacturing organizations, design companies, and regulatory agencies are considering methods to prepare for nuclear cybersecurity. Cryptographic algorithms have to be developed and applied in order to meet nuclear cybersecurity requirements. This paper presents methodologies for validating cryptographic algorithms that should be continuously applied at the critical control system of I&C in NPPs. Through the proposed schemes, validation programs are developed in the PLC, which is a critical system of a NPP's I&C, and the validation program is verified through simulation results. Since the development of a cryptographic algorithm validation program for critical digital systems of NPPs has not been carried out, the methodologies proposed in this paper could provide guidelines for Cryptographic Module Validation Modeling for Control Systems in NPPs. In particular, among several CMVP, specific testing techniques for ECB mode-based block ciphers are introduced with program codes and validation models.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.81-90
• /
• 2004

The state assignment for a finite state machine greatly affects the delay, area, power dissipation, and testabilities of the sequential circuits. In order to improve the testabilities and power consumption, a new state assignment technique . based on m-block partition is introduced in this paper. By the m-block partition algorithm, the dependencies among groups of state variables are minimized and switching activity is further reduced by assigning the codes of the states in the same group considering the state transition probability among the states. In the sequel the length and number of feedback cycles are reduced with minimal switching activity on state variables. It is inherently contradictory problem to optimize the testability and power consumption simultaneously, however our new state assignment technique is able to achieve high fault coverage with less number of scan nfp flops by reducing the number of feedback cycles while the power consumption is kept low upon the low switching activities among state variables. Experiment shows drastic improvement in testabilities and power dissipation for benchmark circuits.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.221-226
• /
• 2018

Open source software allows revising and adding a new idea on them as well as debugging themselves. The open source software can be utilized as various educational programs as well as development of a commercial software products using them. MIT App Inventor, one of the block-based visual programming environments for education, supports building a local server and even revision of the platform itself by providing its own source codes. In this paper we implement App Inventor open sources on the local server. Especially we present how to revise and implement a new App Inventor platform reflecting their own requirements in schools or educational institutes and how to build a local server operating the revised App Inventor platform. They can provide more interactive educational environments to students and improve educational satisfaction through the active customizing of the platform itself such as adding new programming block components requested by students.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.872-877
• /
• 2011

In this paper, the new decoding algorithm of Block Turbo Codes using Channel State Information(CSI), which is estimated to compensate for the distorted signal caused by multi-path fading, is proposed in order to improve error correction capacity during decoding procedure in OFDM system. The performance of the new decoding algorithm is compared to that of the conventional decoding algorithm without using channel state information under the Rayleigh fading channel. Experimental results showed that in case of only one iteration coding gains of up to 5.0dB~9.0dB can be obtained by applying the channel state information to the conventional decoding algorithm according to the modulation methods. In addition to that, the new decoding algorithm using channel state information at only one iteration shows a performance improvement of 3.5dB to 5.0dB when compared to the conventional decoding algorithm after four iterations. This leads to reduce the considerable amount of computation.