• 한국초지조사료학회지
• /
• 제28권3호
• /
• pp.203-214
• /
• 2008

조사료 생산에 유망한 동계작물 중 보리, 밀, 귀리(월동 가능), 트리티케일(라이밀) 등 4종의 총체맥류에 대하여 보리를 주품종으로 한 혼파재배시 조사료 생산 증대 효과를 요약한 결과는 다음과 같다. 보리 식물체의 건물중과 이삭크기 등으로 볼 때 혼파재배시 보리의 생육이 저하되는 작물은 트리티케일이 가장 심하였고, 다음은 밀이었으며, 귀리는 생육차이가 없었다. 보리를 주품종으로 하고 밀, 트리티케일, 귀리 등과의 혼파재배시 이삭수 증가 또는 보조작물의 생체량 증가 등에 의하여 총 생체수량은 증수되었으나 보조작물의 건물율이 낮아 건물수량은 증수되지 않았다. 청보리와 밀, 트리티케일, 귀리 등과의 혼파재배시 NDF 함량과 조단백질 함량이 증가되었으나 ADF 함량과 DDM 함량은 낮아지는 경향이었다. 상대적 사료가치는 보리와 밀의 혼파재배에서 높아졌으나, 보리와 트리티케일, 보리와 귀리와의 혼파재배에서는 차이가 없었다. 중부지방에서 보리와 혼파재배시 조사료 생산 증대 가능성이 높은 작물로는 밀이나 트리티케일에 비하여 분얼력이 왕성하고 출수기의 차이에 의한 생육단계의 상이한 진행 등의 장점과 풍엽성이 상대적으로 양호한 귀리가 유망하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.73-81
• /
• 1999

가장 보편적으로 사용되고 있는 도공용 안료인 클레이와 탄산칼슘의 배합비율을 실제 도공공정의 안료 혼합비와 근사하게 설정한 후, 이온성 라텍스를 적용해 봄으로서 이들의 상호작용과 도공지의 품질에 미치는 영향에 대해 검토해 보았다. 1,2급 클레이를 각각 35부, 탄산칼슘을 30부씩 혼합한 후, 제조한 도공액의 탈수량 및 침강중량비 측정 결과, 양성라텍스는 음이온성 라텍스보다 다분산 안료 배합하에서도 안료와의 상호작용이 크다는 것을 알 수 있었으며, 형성된 필터케이크충의 구조가 다공성임을 알 수 있었다. 이러한 결과는 제조한 도공지의 표면거칠기 및 투기도 등의 도공지 표면 및 내부육특성 측정을 통해 확인할 수 있었다. 결과적으로 양성라텍스를 사용하여 제조한 도공지의 인쇄적 성이 음이온성 라텍스를 사용한 경우보다 우수하였다. 이는 양성라텍스가 탄산칼슘이 일정비율 첨가된 안료 배합조건 하에서도 이오기의 전하반전 특성을 통해 클레이와의 정전기적 상호작용을 할 수 있다는 사실을 보여주었으며, 1급 클레이의 혼합비율 일부를 2급 및 탄산칼슘으로 대체하여 도공지의 품질 및 인쇄적성을 개량하였다.

• 에너지공학
• /
• 제13권1호
• /
• pp.20-27
• /
• 2004

본 연구에서는 고점도 저질유를 연료로 사용하는 디젤기관에 있어서 연료에 저비점 함산소물질을 혼합하였을 때의 배기배출물 특성변화에 대해 조사하였다. 실험은 6종류의 혼합물을 여러 혼합비로 베이스 연료에 첨가하여 기관 성능과 배기배출물 특성 변화에 대해 실시하였으며, 다음과 같은 결론을 얻었다. 저질유로의 저비점물질 흔합에 의해 매연 CO, PM, SOF 및 열소비율이 대폭적으로 개선되었다. 이러한 경향은 분사시기 지연시에 현저하였으며, 혼합물질의 비점이 낮을 수록 혼합비율이 클수록 또한 비함산소 물질보다는 함산소물질에 있어서 더 현저하였다. 또한, 저질유에 함산소물질 DMM을 20 vo1.% 흔합하고 연료분사시기를 지연시킬 경우에는 통상의 경유 운전을 상회하는 NOx-매연 트레이드 오프 관계가 얻어졌다. 따라서, 고점도의 저질유연료를 사용하는 디젤운전에 있어서도 저비점 함산소물질의 혼합에 의해 효과적이고 청정하게 사용될 수 있을 것으로 기대된다.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.81-89
• /
• 2018

Fuel blend technique is one of the most effective way of using biomass to replace the coal. Many studies on combustion characteristics with coal and biomass blends have been conducted. In this study, char reactivity and emission characteristics of coal (Suek) and biomass (EFB) blends has been investigated by TGA and DTF to evaluate the applicability of the pre-treated (torrefaction, ash removal technology) EFB to pulverized coal boiler. In all blending cases, char reactivity improved as the blending ratio increases (10, 20, and 30%), especially torrefied EFB blended at 30%. Also, unburned carbon decreased as the blending ratio increases in all types of EFB. NOx emission showed the increase and decrease characteristics according to the content of fuel-N of raw EFB and torrefied EFB. But the amount of NOx emission at ashless EFB blends is greater than that of Suek despite of lower fuel-N. It indicated that co-firing effect of using the pretreatment biomass fuel is relatively better than those of the untreated biomass fuel about char reactivity and emission characteristics.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.62-73
• /
• 1998

The aim of this work was to investigate the effects of pigment composition on the calendering response and structure of the coated paper. Calendering response of the coated paper was determined from the gloss values of the uncalendered and calendered coated papers, and the relationship between gloss and coating structure was discussed. The surface and cross section of the coating layer was observed using a scanning electron microscope to examine the coating structure. Coating layers were hardened in epoxy resin and polished with carbimet paper disc for preparing SEM samples. Maximum calendering response was obtained for the coated paper prepared from 80pph of clay and 20pph of ground calcium carbonate (GCC) as pigments. Photomicrographs of the surface and cross section of the coating layer show that clay tends to form dense coating structure, while GCC tends to form bulky coating layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.784-787
• /
• 2007

A process flowsheet simulation model based on ASPEN PLUS was developed to investigate the effect of co-gasification of coal and rice husk on the gasifier performance and pollutant emissions in IGCC power plant. The analyses were done for an 02-blown, pulverized gasifier using coal and rice husk as feedstock, parameter employed the blending ratio of rice husk in coal were investigated. From the simulation results, it was found that gaseous pollutant emissions were reduced substantially with the increase of the blending ratio of rice husk. An optimum range between 15% and 25% rice husk-to-coal ratio was found to be the optimum point in terms of gaseous pollutant emission per energy output for sui fur and nitrogen compounds.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.185-191
• /
• 1992

In this paper, it is attempted to distinguish the charged particles and to judge the polarity by the use of Thermally Stimulated Current(TSC) and Temperature Gradient Thermally Stimulated Surface Potential Measurement(TG-TSSP)with experimental insulation material XLPE-EVA for power cables which is made by blending cross-linked polyethylene(XLPE) and ethylene-vinylacetate copolymer(EVA). In addition, it is performed to investigate the effect of EVA blending. From the experimental results, it is known that for the case of XLPE-EVA blended experimental material, the generation of space charged electric field is not obtained in the high temperature region due to the obatruction of the injection of trapping carrier by the electron and the positive hole.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.145-150
• /
• 2004

Blends of poly(phenylene sulfide) (PPS) and polyethylene, either linear low density polyethylene (LLDPE) or metallocene-catalyzed polyethylene (MPE), that were prepared by melt blending, were investigated. From the rheological properties as determined by capillary rheometry, the melt viscosity of both PPS/LLDPE and PPS/MPE blends was low when PE was in dispersed phase, but high melt viscosity was observed for both blends with PPS in dispersed phase. Significant differences depending on the composition were found in the mechanical properties such as percent elongation at break and notched Izod impact strength. In addition, dispersed phase morphology of the blends was analyzed by a scanning electron microscope (SEM), together with brief discussion about the difference between them.

• 한국지능시스템학회논문지
• /
• 제23권1호
• /
• pp.18-23
• /
• 2013

In this paper we propose an image enhancement technique based on histogram specification method over local overlapping regions referred as Local Histogram Specification. First, both reference and original images are splitted into local regions that each overlaps half of its adjacent regions and general histogram specification method is used between corresponding local regions of reference and original image. However it produces noticeable boundary effects. Linear weighted image blending method is used to reduce this effect in order to make seamless image and we also proposed new technique dealing with over-enhanced contrast areas. We satisfied with our experimental results that showed better enhancement accuracy and less noise amplifications compared to other well-known image enhancement methods. We conclude that the proposed method is well suited for motion detection systems as a responsible part to overcome sudden illumination changes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.866-871
• /
• 1994

B-spline curves and surfaces are effective solutions for design and modelling of the freeform models. The control methods of these are using with control points, knot vectors and weight of NURBS. Using control point is easy and resonable for representation of general models. But the movement of control points bring out the reformation of original convex hull. The B-splines with nonuniform knot vector provide good result of the shape modification without convex hull reforming. B-splines are constructed with control points and basis functions. Nonuniform knot vectors effect on the basis functions. And the blending curves describe the prorities of knot vectors. Applying of these, users will forecast of the reformed curves after modifying controllabler primitives.