• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.67-73
• /
• 1994

The adsorption behaviors of acid dye and disperse dye on silk and nylon fabrics were examined, in one bath dyeing system on silk/nylon blend fabric with disperse dyes and acid dyes. In the dyeing of nylon fabric with C. I. Disperse Red 19 (Red 19) and C. I. Disperse Red 60 (Red 60), dye uptake of Red 19 was higher than that of Red 60. When silk/nylon blend fabric was dyed with Red 19 and Red 0, the dye uptake on nylon was influenced by the ffinity of the dye to the silk fabric. In the dyeing of silk/nylon with C. I. Acid Blue 80 and C. I. Acid Yellow 121, solid shade could not be obtained with the conventional method but could be obtained with the dyeing resist agent for nylon. There was not any relationship between K/S value and Munsell value, but Munsell value tended to change with the K/S value.

• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.16-21
• /
• 2008

In this study the effects of swelling and fixing agent for the cotton side of polyester/cotton blended fabrics and the thermosol temperature on the dyeing properties and fastness. were investigated, when the polyester/cotton blended fabrics were dyed with a disperse dye which was able to dye both side of fiber by one bath one step thermosol process. The obtained results are as follows; The dye adsorption decreased with the increase of cotton blend ratio in polyester/cotton blended fabrics, when the ratio of swelling and fixing agent for cotton side was constant. As the thermosol temperature increased up to $210^{\circ}C$, the dye adsorption were increased, but that effect was less significant when the cotton blend ratio was higher.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.143-149
• /
• 1981

Consumer consider the purpose for which they plan to use clothes when they purchase it, and the socks in textile products is evaluated in the same way. serviceability is judged by the extent to which the socks will be useful for its intended purpose. It should retain its original shape and size, good air permeability, good absorbency, good abrasion resistance, high fastness etc. Owing to importance of serviceability in socks, in this paper, these end-use requirement characteristics were tested. The results obtained were as follows: 1. Blend ratios were different between the indicated fiber contents on labels and the testing ones. 2. Air permeability was higher in the samples which contain less stitch density, and hydroscopicity was higher in those which contain natural fibers such as cotton and wool. 3. Shrinkage depended on the blend ratios of cotton and wool, and elastic recovery was better in the course direction than in the wale direction. 4. Pilling was conspicuous in the synthetic fibers such as polyester and nylon, and fastness of laundering and perspiration was higher in the fading grade than in the staining grade.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.237-240
• /
• 2002

Amino terminated polyetherimide(ATPEI) has been synthesized by bisphthalic anhydride arid m-phenylenediamine, after that characterized by differential scanning calorimetry(DSC), thermogravimetric analyzer(TGA). Fourier transform (FT-IR) spectroscopy and gel permeation chromatography(GPC). ATPEI was blend to improve the toughness of bisphenol-A type epoxy resin which was cured by nadic methyl anhydride(NMA). The fracture toughness and the molphology of the toughened epoxy resin was evaluated. The toughness of ATPEI modified epoxy resin was higher than that of the PEI modified epoxy resin. In addtion, carbon fiber/ATPEI modified epoxy resin composites were fabricated and the mechanical properties of the resulted composites were investigated.

• The Korean Journal of Rheology
• /
• v.8 no.2
• /
• pp.69-77
• /
• 1996

장섬유강화 열가소성 고분자 복합재료 (FRTP)의 난연성과 개선을 위하여 polyhenylene sulfide(PPS)를 첨가한 polyamide 6(PA6)/glass fiber (GF)의 FRTR를 제조하 였다. 고점성수지내에 보강섬유를 균일하게 분산시키고 함침성을 높임과 동시에 보강섬유의 손상을 방지하기 위하여 섬유상 수지와 보강섬유를 분섬비동장치에서 직접혼방시키고 이를 압축성형하는 독특한 공정을 도입하였다. 제조된 복합재료의 유변학적 특성 형태학적특성 인장 및 충격특성 열적특성, 난연성, 내약품성에 관한연구를 수행한 결과 복합재료와 기계적 특성을 약화시키지 않으면서도 난연성가 내약품성을 현격히 향상시킬수 있는 FRTP의 제조 가 가능함을 확인하였다.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.52-60
• /
• 2015

The present study aims to the use of carboxymenthyl cellulose (CMC) improving the ability of fiber in the dyeing process. Cellulose was extracted from banana leaves by NaOH and then modified by reacting with chloroacetic acid to obtain the carboxymenthyl cellulose. The effect of carboxymenthyl cellulose contents on the mechanical properties and dye absorption were also investigated. Then, CMC were blend with polypropylene (grade 561R) at 1%, 3% and 5% by weight ratio. The fibers were obtained from single screw extruder. The results show that the mechanical properties of the product decreased when increased the amount of CMC in the fiber product. After dyeing, the dye however were absorbed by the CMC-PP fibers more than the original PP fibers. The absorption of dye on the CMC-PP fibers increased significantly with the CMC ratio.

• Nuclear Engineering and Technology
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1980

The grafting studies were concentrated on working out the methodology for radiation of flame retardants to polyester/cotton (65/35) blend fabric. The Fyrol 76 was used as a flame retardant in develping methodology for localizing flame retardants on the surface of the blend fabric. By judicious control of the swelling conditions, time_of contact with the monomer, and dose rate, locating the graft in the fiber became possible. The yield of the graft polymerization was depended upon the total dose and the preswelling conditions. Oxygen Index was used to evaluate the effect of the location of Fyrol 76 and other flame retardants within the surface upon the flame retardance efficiencies. To get a better flame retardance efficiency by :the localized grafting of Fyrol 76 to polyester/cotton blend fabric, a technique of one step processing at room temperature was developed substituting the ordinary two-step processing at high temperature.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.121-126
• /
• 2005

Semicrystalline poly(ethylene terephthalate) (cPET)/amorphous poly(ethylene terephthalate) with isophthalic acid (aPET) blends with 100/0, 75/25, 50/50, 25/75, and 0/100 by weight ratios were dissolved in a mixture of trifluoroacetic acid (TFA)/methylene chloride (MC) (50/50, v/v) and electrospun via the electrospinning technique. Solution properties such as solution viscosity, surface tension and electric conductivity were determined. The solution viscosity slightly decreased as aPET content increased, while there was no difference in surface tension with respect to aPET composition. The characteristics of the electro spun cPET/aPET blend nonwovens were investigated in terms of their morphology, pore size and gas permeability. All these measurements were carried out before and after heat treatment for various blend weight ratios. The average diameter of the fibers decreased with increasing aPET composition due to the decrease in viscosity. Also, the morphology of the electrospun cPET/aPET blend nonwovens was changed by heat treatment. The pore size and pore size distribution varied greatly from a few nanometers to a few microns. The gas permeability after heat treatment was lower than that before heat treatment because of the change of the morphology.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.102-106
• /
• 2003

Crystallization behaviour of blends of different MFI isotactic polypropylenes (PP), and blends of PP with carbon nanofibre have been investigated by DSC and polarizing optical microscope. Both higher MFI PP component and the carbon nanofibre in the blend influence the nucleation activity of the melt during non-isothermal crystallization. In presence of carbon nanofibre, the sherulitic growth rate is highly disturbed. The calculation of nucleation activity indicates that carbon nanofibres act as active substrate for heterogeneous nucleation.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.321-322
• /
• 2003

Poly(vinyl alcohol) (PVA) is a polymeric biomaterial that obtained by the saponification of poly(vinyl acetate) (PVAc). It has a nontoxic and water-soluble synthetic polymer, and has excellent biodegradability, biocompatibility, ability of film forming, and hydrophilic property, which is widely used in biochemical and biomedical applications.$\^$1)/ Chitosan is one of a few natural cationic polysaccharides that can be obtaiend by alkaline deacetylation of chitin which is the second most abundant polymeric material in the earth.$\^$2)/ (omitted)