• Applied Microscopy
• /
• v.36 no.1
• /
• pp.25-33
• /
• 2006

This study applied a bleaching agent. which is commonly used in the beauty salons, to the hair of normal adult women, collected the hair immediately and 10 days and 20 days from the bleaching, were investigated the degree of degradation of the hair by using scanning and transmission electron microscopes. The surface of hair just after bleaching was observed to be similar to that of normal hair, showing no split or damage of scale. In the hair of 10 days after bleaching, however, the scale came off. From this time, scale on the cuticular layer of hair began to be separated. In 10 days from bleaching, the scale on the cuticular layer was separated from hair and some cytoplasm of cuticular cells was broken into pieces or fell off. The cell remains made the surface coarse and uneven. At this period, damaged scales had a sharp end. In the hair of 20 days after bleaching, scale fell off from the whole surface of the hair and the surface looked rough. On the bleached hair, many vacuoles were formed in the endocuticle of cuticular cells. As a result, deformation caused by the formation of vacuoles in cuticles broke up the cuticular cells.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.47.1-47.9
• /
• 2021

Objectives: This study aimed to use a laboratory model to evaluate the efficacy of an experimental bleaching agent. Materials and Methods: The model used human extracted molars that were treated and measured for bleaching efficacy. Teeth (n = 50) were distributed into 5 groups: Negative control (NC): immersion in water for 8 hours; Nanofibers (NFs): Experimental titanium dioxide nanofibers with stirring and light activation for 8 hours; Whitestrips (WS): Crest 3D White Glamorous White Whitestrips, 2 applications daily for 30 minutes, 14 days; 1% hydrogen peroxide (HP) standard: 1% hydrogen peroxide for 8 hours; and 30% HP standard: 30% hydrogen peroxide for 8 hours. Instrumental measurements were performed using a spectrophotometer. Results were recorded at baseline, 1-day post-bleaching, and 1-week post-bleaching. Kruskal-Wallis procedure was used to determine differences in color change. Pearson correlation was used to evaluate the relationship between visual and instrumental measurements. Tests of hypotheses were 2-sided with alpha = 0.05. Results: There was no significant difference in color parameters (L1, a1, b1, and shade guide units [SGU]) at baseline (p > 0.05). There was a significant difference among the groups for overall color change (ΔE^*ab) and change in shade guide units (ΔSGU) at 1-day and 1-week post-bleaching (p < 0.05). The higher the HP concentration, the higher the color change as expressed in ΔSGU and ΔE^*ab. The negative control exceeded the perceptibility threshold of ΔE^* = 1.2 regardless of time point. NFs showed a decrease in chroma, but were not statistically different compared to the negative control. Conclusions: The laboratory model was successful in screening an experimental bleaching agent.

• Journal of Technologic Dentistry
• /
• v.23 no.1
• /
• pp.85-93
• /
• 2001

The purpose of this study was to evaluate the effects of commercial home-tooth bleaching agents on the color of tooth. Twenty five sound extracted teeth were randomly divided into five groups. The color differences between before and after treatment with five types of tooth bleaching agents (7.5% hydrogen peroxide Nite White $Excel^{(R)}$, 10% carbamide peroxide Nite White $Excel^{(R)}$, 16% carbamide peroxide Nite White $Excel^{(R)}$, 10% carbamide peroxide Insta-BriteTM, 20% carbamide peroxide Insta-$Brite^{TM}$) were evaluated. The results were as follows: 1. By 2 week home tooth bleaching agent applications, the values ($L^*$) of bovine teeth increased as high as 4.38 $\sim$ 8.80 when comparing to those of the samples before treatment, and the color difference (${\Delta}E^*$) showed as high as 10.16 $\sim$ 15.04. 2. 16% carbamide peroxide Nite White Excel induced significantly greater ${\Delta}L^*$ than other test edgroups except for 7.5% hydrogen peroxide Day White Excel, and significantly greater ${\Delta}E^*$ than other tested groups by 2 week bleaching agent treatments (p<0.01). 3. 16% carbamide peroxide Nite White Excel(${\Delta}L^*$=8.80, ${\Delta}E^*$=15.04) induced significantly greater ${\Delta}L^*$ and ${\Delta}E^*$ than 10% carbamide peroxide Nite White Excel(${\Delta}L^*$=5.01, ${\Delta}E^*$=10.16)(p<0.01), but significant difference between 10% carbamide peroxide Insta-Brite(${\Delta}L^*$=4.38, ${\Delta}E^*$=10.51) and 20% carbamide peroxide Insta-Brite(${\Delta}L^*$=5.63, ${\Delta}E^*$=11.23) was not shown in ${\Delta}L^*$ and ${\Delta}E^*$(p>0.01). 4. 16% carbamide peroxide Nite White Excel(${\Delta}L^*$=8.80, ${\Delta}E^*$=15.04) which were applied in night time induced significantly greater ${\Delta}L^*$ and ${\Delta}E^*$ than 7.5% hydrogen peroxide Day White Excel(${\Delta}L^*$=8.47, ${\Delta}E^*$=12.75) which were applied in day time. Conclusions: These results demonstrate that all the commercial home-tooth bleaching agents have appreciable bleaching effect on teeth, and the effects of home-tooth bleaching agents which are used during night time are affected by content of carbamide peroxide. Especially the whitening effect of home tooth bleaching agents that are used through night time is greater than that of short time-applying tooth bleaching agent.

• Restorative Dentistry and Endodontics
• /
• v.43 no.3
• /
• pp.32.1-32.11
• /
• 2018

Objectives: This study evaluated the effects of a bleaching agent on the composition, mechanical properties, and surface topography of 6 conventional glass-ionomer cements (GICs) and one resin-modified GIC. Materials and Methods: For 3 days, the specimens were subjected to three 20-minute applications of a 37% $H_2O_2$-based bleaching agent and evaluated for water uptake (WTK), weight loss (WL), compressive strength (CS), and Knoop hardness number (KHN). Changes in surface topography and chemical element distribution were also analyzed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. For statistical evaluation, the Kruskal-Wallis and Wilcoxon paired tests (${\alpha}=0.05$) were used to evaluate WTK and WL. CS specimens were subjected to 2-way analysis of variance (ANOVA) and the Tukey post hoc test (${\alpha}=0.05$), and KH was evaluated by one-way ANOVA, the Holm-Sidak post hoc test (${\alpha}=0.05$), and the t-test for independent samples (${\alpha}=0.05$). Results: The bleaching agent increased the WTK of Maxxion R, but did not affect the WL of any GICs. It had various effects on the CS, KHN, surface topography, and the chemical element distribution of the GICs. Conclusions: The bleaching agent with 37% $H_2O_2$ affected the mechanical and surface properties of GICs. The extent of the changes seemed to be dependent on exposure time and cement composition.

• Restorative Dentistry and Endodontics
• /
• v.24 no.3
• /
• pp.453-464
• /
• 1999

The non-vital bleaching technique has been used widely as a very effective treatment method on discolored non-vital teeth. But periodontal tissue deterioration and cervical external root resorption have been reported because of the high toxicity of hydrogen peroxide in bleaching agents. So in previous studies, placement of base over the root canal obturation prior to bleaching has been suggested in order to prevent microleakage of bleaching agents, however, the effectiveness of base is still controversial. The purpose of this study was to evaluate the effects of base and root canal sealer on prevention of leakage of bleaching agents in non-vital bleaching. Fifty-two extracted sound teeth with single root were used. For root canal obturation, Tubuli seal$^{(R)}$(Kerr Co., USA) was used in 39 teeth and in others, AH-26$^{(R)}$(De Trey Dentsply, Inc., Switzerland) was used as a root canal sealer. 26 teeth among the teeth obturated with Tubuli seal$^{(R)}$ were divided into two groups, and Dentin cement$^{(R)}$(GC corp., Japan) and JRM$^{(R)}$(De Trey Dentsply, Inc. Germany) were used in each group as a intracanal base. In all teeth, non-vital bleaching using bleaching agent mixed with methylene blue dye was performed and all specimens were stored in $37^{\circ}C$ water bath for 72 hours. After sectioning longitudinally, the depth of dye leakage was measured with digital vernier calipers under the stereobinocular microscope using ${\times}40$ magnification. It can be concluded as follows: 1. The microleakage of bleaching agent was observed ill all groups regardless of type of the base and the sealer. 2. The microleakage in the groups using AH-26$^{(R)}$ as a sealer was significantly reduced (p<0.05). 3. In the groups with intracanal base, micro leakage was observed through almost the whole depth of the base and there was no significant difference between Dentin cement$^{(R)}$ and IRM$^{(R)}$ group(p>0.05). In conclusion, all the basing materials and the sealers in this study did not prevent the microleakage of bleaching agent. Therefore further studies and attempts to seal off the pulp chamber will be necessary.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.222-227
• /
• 1999

The weavability and bleaching of ramie/silk mixture fabrics were examined. When silk fiber was used as warp or weft in the mixture fabrics, the weaving properties became higher than that of ramile fabrics. Especially, the highest weavabiliy of mixture fabrics was obtained when used as warp silk fiber. The whiteness of ramie and tussah fiber treated with hydrogen peroxide, bleaching agent. was increased up to about 80% without significant changes of tenacity and elongation. As the increase of bleaching agent and treatment time, the whiteness of mixture fabrics was increased and the yellowness was decreased. Also, as the whiteness of mixture fabrics increased, the drape stiffness in warp direction was decreased but crease recovery was increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.65-73
• /
• 2012

Nowadays, the concern on the environmental load of bleaching process gave rise to the process of ECF(elemental chlorine free) and TCF(total clorine free). These sequences are based on oxygen-derived compounds such as oxygen, ozone, and hydrogen peroxide which is used as a typical eco-friendly bleaching agent. In this study, paper mulberry pulp was bleached with hydrogen peroxide and some bleaching process were accompanied with ultrasonication in order to increase the bleaching efficiency. The best bleaching efficiency of paper mulberry pulp was obtained in the condition of hydrogen peroxide and ultrasonication(20 kHz) bleaching system at $45^{\circ}C$ for 30 min. The brightness and kappa number of paper mulberry pulp were gained to 5.09% and 3.52 respectively. and yield was slightly loosed to 2%. Therefore, the efficiency of hydrogen peroxide and ultrasonication bleaching system of paper mulberry pulp was superior to the conventional hydrogen peroxide bleaching system. Magnesium sulfate acted as a bleaching stabilizer for the increasement of yield. As a result, the yield and viscosity were increased to 2.2% and 12% respectively.

• Journal of dental hygiene science
• /
• v.20 no.4
• /
• pp.252-260
• /
• 2020

Background: In this study, the bleaching effect and surface damage of two types of over-the-counter home tooth bleaching agents were explored using an in vitro study of bleaching agents applied to bovine teeth specimens for 14 days. Methods: Domestic over-the-counter home tooth bleaching agents of gel and patch form that shared common active ingredients and manufacturers were selected and tested. The experiment specimens were made using composite resin with bovine tooth samples and then measured the initial microhardness. Specimens were then divided into a Gel group and a Patch group and underwent bleaching treatment once a day for two weeks for 30 to 60 minutes (recommended) or 7 hours. All specimens were coffee-stained prior to bleaching. The bleaching effect was measured using a spectrophotometer and surface damage was measured using a microhardness meter. Results: The difference in color following the bleaching procedure was positive in both the Gel and Patch group, although there were no statistically significant differences in bleaching effect between groups. There was no significant difference in bleaching effect based on duration. The microhardness test revealed that both the Gel group and the Patch group had surface damage after bleaching. The greatest surface damage was found in the Patch group that had undergone a 7-hour bleaching treatment, although the differences were not statistically significant. Conclusion: The bleaching effect of the home tooth bleaching agent was visible to the naked eye. However, longer applications than recommended did not result in greater bleaching, unlike consumers' expectations, and instead increased the chance of enamel damage. As such, there is a need for consumers to be alert and adhere to recommendations provided by each company.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.96-100
• /
• 2005

The bleaching is one of the worst factors which leads to the damage of the human hair. The cuticle of the human hair is injured by the alkali that is one of the chief ingredients of a bleaching agent. The alkali component of the bleaching solution chemically reacts with human hair, reducing the tenacity and dissolving the cuticle layer. The purpose of this study is to examine the effects of bleaching time and temperature on the physical properties and morphology. The results were as follows. 1. The stress-strain curves for human hair indicated the three distinct regions, such as Hookean region, Yield region and post-Yield region. The tenacity of hair is reduced gradually with an increase of bleaching time. Under these same conditions, elongation of the hair increased. 2. The greatest drop in tenacity for hair occured between $40^{\circ}C$ and $60^{\circ}C$ of bleaching temperature. 3. Compared with the virgin hair, bleached hair showed a slower rate of weight reduction in the TGA thermogram. The rate decreased gradually as the bleaching time and temperature increased. 4. As the bleaching conditions reached time and temperature extremes, the human hair cuticle became more damaged. The cuticle layers seemed to have dissolved, as seen in the SEM photographs.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.79-85
• /
• 2006

To evaluate the effect of vital tooth bleaching agent and alcohol pretreatment on dentin bonding, flat dentin windows were produced on the buccal side of the crowns of fifty-five extracted, human premolars. A bleaching gel, $Opalescence^{(R)}$ with 10% of carbamide peroxide (Ultradent Product, USA) was daily applied on the teeth of three experimental groups for six hours for 10 consecutive days, while teeth of a control group were not bleached. After 6 hours of bleaching gel application the specimens were washed and stored in saline until the next day application. After application of $One-step^{(R)}$ dentin bonding agent (Bisco, USA), $Z-250^{(R)}$ resin (3M-ESPE, USA) was bonded to dentin with a mount jig. Shear bond strength was measured with an Instron machine (Type 4202, Instron Corp., USA) after 24 hours. The results were analyzed using one-way ANOVA and Duncan's multiple range test at p < 0.05. Immediate bonding group showed significantly lower bond strength than un-bleached control group (p < 0.05). Ethanol-treated group showed significantly higher bond strength compared to immediate bonding group (p < 0.05). However, the bond strength of the ethanol treatment group was lower than that of the un-bleached control group (p < 0.05). There were no significant difference in shear bond strength between the 2-week delayed bonding group and the ethanol-treated group (p > 0.05) and between delayed bonding group and un-bleached control group (p > 0.05). In the condition of the present study. it seems that alcohol pretreatment after bleaching procedure can reduce the adverse effect of vital bleaching agent on dentin bonding.