• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.96-100
• /
• 2005

The bleaching is one of the worst factors which leads to the damage of the human hair. The cuticle of the human hair is injured by the alkali that is one of the chief ingredients of a bleaching agent. The alkali component of the bleaching solution chemically reacts with human hair, reducing the tenacity and dissolving the cuticle layer. The purpose of this study is to examine the effects of bleaching time and temperature on the physical properties and morphology. The results were as follows. 1. The stress-strain curves for human hair indicated the three distinct regions, such as Hookean region, Yield region and post-Yield region. The tenacity of hair is reduced gradually with an increase of bleaching time. Under these same conditions, elongation of the hair increased. 2. The greatest drop in tenacity for hair occured between $40^{\circ}C$ and $60^{\circ}C$ of bleaching temperature. 3. Compared with the virgin hair, bleached hair showed a slower rate of weight reduction in the TGA thermogram. The rate decreased gradually as the bleaching time and temperature increased. 4. As the bleaching conditions reached time and temperature extremes, the human hair cuticle became more damaged. The cuticle layers seemed to have dissolved, as seen in the SEM photographs.

• Journal of Ginseng Research
• /
• 제11권2호
• /
• pp.101-110
• /
• 1987

인삼(Panax ginseng C.A. Meyer) 엽소병에서 chorophyll의 bleaching 현상에 대한 생리적 반응기작을 조사, 분석한 결과 chorophyll의 bleaching 현상은 singlet oxygen ($^1O_2$)에 의한 photooxidation 과 catalase와 peroxidase의 inactivation에 의한 $H_2O_2$의 autooxidation이었다. Chorophyll의 bleaching 현상에 원인으로 추리된 $H_2O_2$를 농도별로 인삼잎 절편에 처리하였던 바, chorophyll의 함량과 chorophyll의 흡수스펙트럼은 자연광 처리시 유발된 bleaching 현상과 일치하였으며, saponin 첨가로 인하여 bleaching 현상은 현저히 촉진되었다.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.37-43
• /
• 2001

The bleach efficiency between PY and YP bleaching of pulps, which were deinked in neutral (cellulase) and alkaline (NaOH, NaOH/${Na_2}{SiO_3}$) ranges, and were treated on kneader, was compared in this study. The brightness of pulps (84.8~88.4% ISO) which were deinked in alkaline or neutral ranges increased up to 88.4%~88.8% ISO after PY or YP bleaching. There was no difference in the brightness between PY and YP bleaching. And the dirt count of bleached pulps was similar each other at the range of 17~38 ppm. The tensile index of bleached pulps was slightly higher in PY bleaching than those in YP bleaching. While with the treatment of kneading, the brightness and dirt count decreased remarkably compared to those of no-kneading. However, the sharp difference in the brightnesses or in dirt count of bleached pulps decreased after bleaching. The brightness of bleached pulps at YP stages was only numberically higher than those at PY stages without regard to the treatment of kneading. Therefore, in the case of the neutral deinkiing process, the conversion of PY bleaching stages to YP bleaching stages was profitable to water loop system, and was harmless in the aspect of the bleach efficiency.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.128-133
• /
• 2004

This paper reports the effects of bleaching of alpaca tops and dyeing of bleached alpaca tops/yarns on the quality of tops and yarns. A dark brown alpaca top was bleached with hydrogen peroxide. Two bleaching methods were tried for effectiveness of color removal. A portion of each bleached top was dyed after bleaching. Color parameters were examined for unbleached, bleached and bleached/dyed tops, these tops were then converted into yarns of different twist levels and counts using a worsted spinning system. Some of the bleached yarn from each bleaching method was dyed in a package dye vat to compare the difference of top dyeing versus yarn package dyeing on yarn quality. Fiber diameter, yarn strength, yarn evenness, yarn hairiness and fiber degradation were tested to examine the effects of bleaching and dyeing on these properties at top and yarn stages. A processing route for bleaching and dyeing alpaca fiber was recommended.

• 대한치과보철학회지
• /
• 제47권2호
• /
• pp.174-181
• /
• 2009

연구목적: 본 연구에서는 35% 과산화수소를 사용하는 전문가 미백 술식에서 레진 접착제의 접착력 회복을 위한 유예 기간을 비교하고자 한다. 연구 재료 및 방법:3M사의 Single Bond와 Z350을 이용하여 미백 직 후, 1일후, 2일후, 일주일 후의 시간 차이를 두고 상아질에 접착된 복합 레진의 전단 결합 강도를 측정하여 다음과 같은 결과를 얻었다. 결과: 미백 처리 직 후의 상아질 전단 결합 강도는 다른 군에 비해 유의하게 낮았으며(P<.05), 미백 처리 전에 비해 약 78%의 결합력 감소를 보였다. 미백 처리 1일 후의 상아질 결합 강도는 미백 직 후 감소된 결합력의 51%에 이르는 회복을 보였으며, 2일 경과한 시편에서는 감소된 결합력의 63%가 회복되었다. 두 군은 미백 직 후에 비해 유의하게 큰 회복력을 보였으나, 두 군 간에는 유의한 차이가 없었다(P>.05). 미백 처리 후 결합력의 회복은 초기 24시간 이내에 급격히 일어나며 그 이후에는 서서히 일어나는 것으로 사료된다. 미백 일주일 후의 시편은 미백 처리 전에 비해97%에 이르는 결합력을 보이며 두 군 간에는 유의한 차이가 없었다(P>.05). 결론: 그러므로35% 과산화수소를 적용하는 전문가 미백 술식에서는 1주일간의 유예기간을 두고 복합 레진 접착술을 시행하는 것이 적절할 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.183-196
• /
• 1998

The purpose of this study was to determine the effect of bleaching technique on the shear bond strength of esthetic restorative materials to bovine enamel. The bleaching agent was used 35% $H_2O_2$(Hi-Lite, Shofu, U.S.A.). Experimental groups were divided into two divisions as group A and B. Experimental A groups for the effect of number of bleaching were as follows ; Group Al : no bleaching Group A2 : bleaching 1 time ( for 5 minutes ) Group A3 : bleaching 3 times ( each for 5 minutes ) Group A4 : bleaching 6 times ( each for 5 minutes ) Group A5 : bleaching 9 times ( each for 5 minutes ) Experimental B groups for the effect of storage period in artificial saliva were as follows ; Group B1 : not stored in artificial saliva after bleaching Group B2 : stored in artificial saliva for 1 day after bleaching Group B3 : stored in artificial saliva for 1 week after bleaching Group B4 : stored in artificial saliva for 2 weeks after bleaching Group B5 : stored in artificial saliva for 4 weeks after bleaching Composite resin and glass ionomer cement were bonded to all specimens, and the shear bond strength between enamel and r~storative material were measured in Instron Universal Testing Machine(Instron, 4467, U.S.A,), Additionally, the bleached enamel specimens were examed after etching with 37.4% $H_3PO_4$ for 1 min under SEM(S-2300, Hitachi Co., Japan) to observe the effect of bleaching procedure on enamel surface morphology. The result were as follows ; 1. In SEM findings, bleached bovine enamel was found to be superficially rough. 2. In bleached bovine enamel, the effect of acid etching was reduced with the increase of number of bleaching. 3. The mean shear bond strength of composite resin and glass ionomer cement to bleached enamel surface tended to be lower than those to non-bleached enamel surface. 4. With the increase of number of bleaching, the shear bond strength of composite resin and glass ionomer cement to bleached enamel were progressively decreased. 5. Increasing the, storage period in artificial saliva after bleaching, the shear bond strength of composite resin and glass ionomer cement to bleached enamel were progressively increased. 6. The mean shear bond strength of glass ionomer cement to bleached bovine enamel tended to be clearly lower than that of composite resin.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.242-247
• /
• 2013

Objective: To test the null hypothesis that no difference exists between the effects of at-home bleaching and in-office bleaching on shear bond strength (SBS) with bracket bonding at 4 different time intervals after dental bleaching. Methods: Ninety extracted human premolars were randomly divided into 9 groups (n = 10) according to the bleaching methods used (at-home bleaching and in-office bleaching) and the storage time in artificial saliva (30 min, 1 day, 2 weeks, and 3 weeks before bonding). The control group was stored in artificial saliva for 7 days. Brackets were bonded with the Transbond XT adhesive system, and SBS testing was performed. The adhesive remnant index (ARI) was used to assess the amount of resin remaining on the enamel surfaces after debonding. The SBS data were analyzed by analysis of variance (ANOVA) and the Tukey test. For the ARI, the Kruskal-Wallis test was performed. Significance for all statistical tests was predetermined to be p < 0.05. Results: The SBS of the unbleached group was significantly higher (p < 0.05) than that of the bleached groups (except for the group bonded 30 min after at-home bleaching). Conclusions: The null hypothesis was not totally rejected. All bleaching groups tested had decreased SBS of the brackets to the enamel, except for the group bonded 30 min after at-home bleaching. The SBS returned to values close to those of the unbleached enamel within 3 weeks following bleaching.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.6-17
• /
• 1998

치아미백은 100여년전 이상부터 시행되어 왔으나, 지난 4반세기 동안의 생활치아 미백술의 표준적인 방법은 과산화수소와 열원을 사용하거나, 열원과 광원을 복합해서 사용하는 것이었다. 이 술식의 단점은 술식의 복잡성, 많은 비용, 결과의 불확실성과 환자의 불편이었다. 1989년 3월에 치과계에서는 Haywood와 Heyman에 의해 발표된 새로운 생활치아 미백술(Night Guard Vital Bleaching)을 도입했다. 치아구조에 대한 carbamide peroxide의 화학적 효과를 알고 있었으면 수년 전에 개발되었을 아주 간단한 치료술식이다. 이 방법은 시술이 쉽고, 사용 되는 재료의 높은 안전성, 낮은 치료비, 높은 성공률로 최근 다시 치아미백 붐을 일으키는데 일조를 하고 있으며, 생활치아 미백술의 표준적인 방법으로 신속히 자리잡아가고 있다.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.94-105
• /
• 2006

Hair bleaching is a treatment process in which the melanic pigment is oxidized by hydrogen peroxide. With the increase of the number of treatments, $1{\sim}10$ levels of various colors develop, the hair luster diminishes, and the appearance becomes very rough. In this study, by changing the number of hair bleaching and bleaching conditions, the changes in the degree of hair damage and its process were observed through the use of scanning electron microscopy. The color changes were also compared through the use of spectrophotometer. In order to study the physical changes of the bleached hairs and to search for the optimum conditions to keep the hair damages minimum during bleaching, tensile properties were measured and reviewed. By increasing the number of hair bleaching and by the severe conditions, the scales became eroded and the protection layers were decreased, and the oxidation reached the inner sectors resulting in rough surface and fibrillation. The surface of the hairs became bright yellowish and transparent by the bleaching of melanic pigments or by the destruction of pigments. With the increase of bleaching degree, in terms of physical changes, the breaking strength decreased while the elongation increased a little.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2010년도 춘계학술발표회 논문집
• /
• pp.195-206
• /
• 2010

Xylan can be applied to improve the strength properties of paper; however the optical properties, such as brightness, are decreased significantly. To solve that problem, an applicable bleaching process is therefore desired. The aim of this research was to investigate the impact of hydrogen peroxide bleaching on hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (whiteness, brightness, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. Hydrogen peroxide bleaching, as a kind of totally chlorine free (TCF) bleaching method, is quite important industrially for chemical pulp. In our work, the process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied. The results showed that both good mechanical properties and optical properties could be achieved when the operating parameters were controlled properly and therefore hydrogen peroxide bleaching was proved to be a suitable method for bleaching hardwood kraft pulp with adsorption of birchwood xylan.