• 화약ㆍ발파
• /
• 제16권4호
• /
• pp.18-28
• /
• 1998

Effects of blasting vibrations on curing concrete have not been well studied. As a result, unreasonable and strong blasting vibration constraints have been placed on blasting when it occur in the vicinity of curing concrete. To study the effects of blasting on curing concrete blocks of $33.3{\times}27.7{\times}16.2cm$ were molded and placed on the quarry. Several sets of concrete blocks were subjected separately to peak vibrations of 0.25, 0.5, 1.0, 5.0 and 10cm/sec. The impulses of blasting vibrations were applied with thirty-minute intervals. Along with unvibrated concrete blocks, the vibrated concrete samples cored with 60.3mm in diameter were measured for elastic moduli, sonic velocity and uniaxial compressive strength. Test results can be summarized as follows; 1. The blasting vibrations between 6 and 8 hours after pour generally lowered on the uniaxial compressive strength of the concrete. 2. A low blasting vibration of 0.25cm/sec did not affect the uniaxial compressive strength. As the magnitude of the blasting vibration increases, compressive strength of concrete is decreased. 3. Physical properties of the P-wave velocity, Young’s modulus, and Poisson's ratio showed a weakly decreasing trend in the concrete blocks vibrated between 6 and 8 hours after pour.

• 터널과지하공간
• /
• 제2권2호
• /
• pp.199-211
• /
• 1992

Blasting vibrations of 3 quarries and 5 construction sites were measured and investigated with two reference data. Square and cubic root scaled distance were similar in fitness to peak particle velocity of individual blasting site, but the former is better fitted in total. It was suggested that the limit scaled distance for domestic surface blasting be 40kg/$\textrm{cm}^2$ for 10mm/s level and 60kg/$\textrm{cm}^2$ for 5mm/s level, which were lower than the OSM's regulation. Prevailing vibration components were in the order of radial, vertical and transverse directions. Prevailing vibration components were in the order of radial, vertical and transverse directons. Site factors K and m were 242 and -1.283 for all studied area, 357 and -1.348 for construction sites, 118 and -1.160 for quarries. Most prevailing frequency was in the range of 10~2Hz. Overlapping effect of delayed blasting vibrations were insignificant. Vibration history of delayed blasting was longer than simultaneous blasting, and it became longer as measuring distance increased. Wave form and predominant frequencies were more complicated for delayed blasting than instantaneous blasting. The influence of blasting scale and measuring distance were not significant to determine peak particle velocity equation.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.134-143
• /
• 1995

Effects of blasting vibrations on curing concrete have not been well studied. As a result, unreasonable and strong blasting vibration constraints have been placed on blasting when it occurs in the vicinity of curing concrete. To study the effects of blasting on curing concrete blocks of 33.3X27.7X16.2 cm were molded and placed on the quarry. Several sets of concrete blocks were subjected separately to peak vibrations of 0.25, 0.5. 1.0, 5.0, and 10cm/sec. The impulses of blasting vibrations were applied with thirty-minute intervals. Along with unvibrated concrete blocks, the vibrated concrete samples cored with 60.3 mm in diameter were measured for elastic moduli, sonic velocity and uniaxial compressive strength. Test results can be summarized as follows; 1. The blasting vibrations between 6 and 8 hours after pour generally lowered on the uniaxial compressive strength of the concrete. 2. A low blasting vibration of 0.25 cm/sec did not affect the uniaxial compressive strength. As the magnitude of the blasting vibration increases, compressive strength of concrete is decreased. 3. Physical properties of the P-wave velocity, Young's modulus, and Poisson's ratio showed a weakly decreasing trend in the concrete blocks vibrated between 6 and 8 hours after pour.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.326-334
• /
• 2018

Underground water-sealed gas storage caverns have become the primary method for strategic storage of LPG. Previous studies of excavation blasting effects on large-scale underground water-sealed gas storage caverns are rare at home and abroad. In this paper, the blasting excavation for underground water-sealed propane storage caverns in Yantai was introduced and field tests of blasting vibration were carried out. Field test data showed that the horizontal radial velocity had a major controlling effect in the blasting vibration and frequencies would not cause the vibration velocity concentration effects. In terms of the influence of blasting vibration on adjacent caverns, the dynamic finite element model in LS-DYNA soft was established, whose reliability was verified by field test data. The numerical results indicated the near-blasting side was primary zone for the structural failure and tensile failure tended to occur in the middle of the curved wall on the near-blasting side. Meanwhile, the safety criterions for adjacent caverns based on stress wave theory and according to statistic relationship between peak effective tensile stress and peak particle velocities were obtained, respectively. Finally, with Safety Regulations for Blasting in China (GB6722-2014) taken into account, a final safety criterion was proposed.

• 한국터널지하공간학회 논문집
• /
• 제5권4호
• /
• pp.337-348
• /
• 2003

밀장전한 암반 발파공에서 화약 폭발시 발생하는 고압의 폭굉압력 전파메카니즘을 충격파 이론을 적용하여 규명하고 전달된 발파압력 산정식을 유도하였다. 유도된 발파압력 산정식은 폭굉파속도, 단열지수, 화약밀도, Hugoniot 상수, 암반밀도의 함수였다. 에멀젼 화약과 서울 화강암의 특성시험을 시행하여 각 특성치의 확률분포를 정의하고 발파압력 산정식에 적용하여 발파압력의 확률분포를 산출하였다. 화약 특성치와 암반 특성치의 확률분포는 정규분포를 나타냈으며 따라서 발파압력의 확률분포도 정규분포로 추정되었다. 발파압력에 대한 매개변수분석을 시행한 결과 폭굉파속도가 발파압력에 가장 크게 영향을 미쳤다. 또한 이런 특성치의 불확실성이 발파압력의 불확실성에 미치는 영향을 분석하였다. 분석결과 암반특성치의 불확실성이 화약특성치보다 더 크게 영향을 미쳤다. 비록 매개변수분석에서 폭굉파속도가 발파압력에 가장 크게 영향을 미치는 요소이지만 암반특성치의 불확실성이 폭굉파속도의 불확실성보다 더 크기 때문에 발파압력은 후자보다 전자에 의해서 더 크게 영향을 받는다.

• 자원환경지질
• /
• 제31권6호
• /
• pp.527-534
• /
• 1998

Excavation of underground openings changes stress distribution around the opening. The survey of this disturbed zone in excavation is very important to design and construct underground facilities, such as tunnel, gas and oil storage, power plant and disposal site of high- and low-level radioactive wastes. This paper presents a zoning of rock masses with tunnel excavation using PS logging. Compressional and shear wave velocities are measured in boreholes drilled in the tunnel wall, which was constructed with blasting and/or machine excavation. The disturbed zone in excavation can be estimated by comparing PS logging data with a tomographic image of compressional wave velocity and compressional and shear wave velocities of core samples. In the side wall of tunnel, the disturbed zone reaches 1.5 m and 1.0 m in thickness for blocks of blasting and machine excavations, respectively. In the roof of tunnel, however, the disturbed zone is 1.0 m and 0.75 m thick for the two blocks. These results show that the width of the disturbed zone is larger in the side wall of tunnel than in the roof, and 1.3 to 1.5 times larger for the blasting excavation than for the machine excavation.

• 자연, 터널 그리고 지하공간
• /
• 제1권1호
• /
• pp.81-87
• /
• 1999

Effects of blasting vibrations on curing concrete have not been well studied. As a result, unrealistic and costly blasting vibration constraints have been placed on blasting when it occurs in the vicinity of curing concrete. To study the effects of blasting, concrete blocks of $30\times20\times20cm$ were molded and placed on the quarry Different sets of concrete blocks were subjected to peak vibrations of 0.25, 0.5, 1.0, 5.0, and 10cm/sec. The impulses of blasting vibrations were applied at thirty minutes intervals . Along with unvibrated concrete blocks, the vibrated concrete samples with 60.3mm in diameters were measured for elastic moduli, sonic velocity and uniaxial compressive strength. Test results can be summarized as follows : 1) The blasting vibrations between 6 and 8 hours after pour generally have exerted bad influences on the uniaxial compressive strength of the concrete 2) Under low vibration of 0.25cm/sec variations of the uniaxial compressive strength were not shown. As the magnitudes of blasting vibration increased, compressive strength of concrete decreased. But under the vibrations between 5 and 10cm/sec decreases in strength were almost same. 3) Physical properties of the p-wave velocity, Young's modulus, and Poisson's ratio appeared to decrease for the concrete blocks subjected to vibration for 6 to 8 hours.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.76-83
• /
• 1995

Estimation of blasting behavior of explosives is prerequisite in the numerical analysis of blasting works. In this study, blasting pressure is estimated by the finite difference method using the Flux-Corrected Transport Algorithm. To formulate the behavior of blasting gas, the mass conservation equation, the moment conservation equation, the energy conservation equation and the ideal gas state equation are used. The simplified species conservation equation is included to simulate the behavior of reacting explosives. To verify the calculation, the Sod's shock tube problem, the strong shock problem and the reacting problem we used. Numerical results show that the shock wave can be captured by means of the FCT algorithm in the reacting and nonreacting states.

• 한국지반공학회논문집
• /
• 제20권4호
• /
• pp.89-102
• /
• 2004

디커플링장전조건의 화약 폭발시 발생하는 발파압력은 최대압력, 최대압력 도달시간, 압력파형의 함수로 나타난다. 발파 최대압력과 최대압력 도달시간은 화약과 암반 특성의 함수이다. 화약과 암반특성시험 결과로부터 그 특성치의 확률분포를 산출하였다. 화약과 암반 특성치의 확률분포가 정규분포로 나타났으므로 발파 최대압력과 최대압력 도달시간의 확률분포도 정규분포로 추정되었다. 발파 최대압력과 최대압력 도달시간에 가장 크게 영향을 미치는 변수를 파악하기 위하여 매개변수분석과 불확정성분석을 실행하였다. 최대압력과 최대압력 도달시간은 매개변수분석결과 화약특성에 가장 크게 영향을 받았지만 불확정성분석결과 화약보다 암반특성에 크게 영향을 받았다. 발파로 인하여 굴착선주 변 암반에 발생하는 손상을 수치해석으로 분석하였다. 암반손상을 산정하기 위하여 연속체손상역학에 기초하여 사용자 부 프로그램을 작성하였다. 이 부 프로그램을 ABAQUS 주 프로그램과 연결하여 해석하였다. 동적 해석결과는 확대공 발파에 의한 손상이 외곽공보다 크게 나타났다. 확대공 배치, 암반분류 세분화 등 여굴방지 방안이 제안되었다 손상계수의 파쇄기준이 불명확하므로 fuzzy-random 확률이론을 적용하여 파쇄기준과 파쇄영역을 명확하게 나타내었다.

• 화약ㆍ발파
• /
• 제22권3호
• /
• pp.1-12
• /
• 2004

암석 파쇄도는 노천의 벤치발파에서 생산성을 좌우하는 요소이다. 벤치발파에서 암석 파쇄도는 여러 가지 조건의 영향을 받게 되는데, 특히 암반의 불연속면 조건과 자연상태 암반 블록의 크기는 큰 영향을 미치는 것으로 알려져 있다. 이 연구에서는 석회석을 생산하는 3개 노천광산에서 발파조건 뿐 아니라 암반의 불연속면 조건과 자연상태 암반 블록크기를 면밀히 조사하여 이들 조건이 암석 파쇄도에 미치는 영향을 검토하였다. 분석 결과 암반의 불연속면 조건과 발파조건은 복합적인 상호작용에 의해 영향을 미치는 것으로 밝혀졌으며, 특히 자연상태 암반 블록의 크기는 암석 파쇄도에 가장 큰 영향을 미치는 것으로 나타났다. 암석 파쇄도는 암반의 불연속면 조건 중 주절리군의 방향에 의해서도 영향을 받는 것으로 확인되었는데, 주절리군의 방향이 벤치 앞쪽 자유면과 $30^{\circ}$의 경사를 이룰 때 파쇄물의 평균크기가 가장 작게 되는 것으로 나타났다. 이런 현상은 발파로 만들어진 탄성파의 전파경로 차이에 기인하는 것으로 판단된다.