• 시멘트 심포지엄
• /
• 통권37호
• /
• pp.84-89
• /
• 2010

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.704-709
• /
• 2000

This study is to test effects of sulfate attack on deterioration of cement mortar. Four tests have been carried out with four types of mortars mixed by ordinary portland cement and sulfate-resistant portland cement containing blast-furnace slag and fly-ash. It was immersed in sulfate solution for 7, 28, 91, and 180 days. from the test results, sulfate attack resistance of cement mortar was improved by admixtures (blast-furnace slag and fly-ash), sulfate-resistance portland cement mortar showed high resistance than ordinarily portland cement at compressive strength, and similar the resistance of sulfate attack with ordinarily portland cement mortar with admixtures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.174-175
• /
• 2022

The blast furnace slag, which is widely used as a cement admixture, has latent hydraulics under the influence of cement hydrate, and fly ash and silica fume mainly cause a pozolane reaction. As a result, the cement structure becomes dense, and it is possible to compensate for defects when concrete is usually made with portland cement alone. When fixing carbon dioxide through reaction with carbon dioxide, the amount of calcium hydroxide in the cement paste is important. The larger the amount of calcium hydroxide, the more active the reaction may occur. It is also an important variable in calculating the depth of neutralization through carbonization. In this study, calcium hydroxide in cement paste using mixed materials was quantified through thermal analysis.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.584-590
• /
• 2014

Air-cooled slag showed grindability approximately twice as good as that of water-cooled slag. While the studied water-cooled slag was composed of glass as constituent mineral, the air-cooled slag was mainly composed of melilite. It is assumed that the sulfur in air-cooled slag is mainly in the form of CaS, which is oxidized into $CaS_2O_3$ when in contact with air. $CaS_2O_3$, then, is released mainly as $S_2O{_3}^{2-}$ion when in contact with water. However, the sulfur in water-cooled slag functioned as a constituent of the glass structure, so the$S_2O{_3}^{2-}$ ion was not released even when in contact with water. When no chemical admixture was added, the blended cement of air-cooled slag showed higher fluidity and retention effect than those of the blended cement of the water-cooled slag. It seems that these discrepancies are caused by the initial hydration inhibition effect of cement by the $S_2O{_3}^{2-}$ ion of air-cooled slag. When a superplasticizer is added, the air-cooled slag used more superplasticizer than did the blast furnace slag for the same flow because the air-cooled slag had higher specific surface area due to the presence of micro-pores. Meanwhile, the blended cement of the air-cooled slag showed a greater fluidity retention effect than that of the blended cement of the water-cooled slag. This may be a combined effect of the increased use of superplasticizer and the presence of released $S_2O{_3}^{2-}$ ion; however, further, more detailed studies will need to be conducted.

• 한국건축시공학회지
• /
• 제14권4호
• /
• pp.285-291
• /
• 2014

본 연구에서는 고로슬래그미분말의 분말도 종류 및 치환율이 시멘트 페이스트 및 모르타르에 미치는 영향에 대하여 검토하였다. 그 결과는 다음과 같다. 전반적으로 BS1 및 BS2의 경우 치환율이 증가함에 따라 항복치도 증가하는 경향을 보였다. 반면, BS 3의 경우 치환율이 증가함에 따라 전단응력이 감소하며 항복치도 감소하는 경향을 나타 내었다. 위 실험 결과를 참조하여 고로슬래그미분말을 사용한 현장배합 설계 시 유동성 파악의 기초적 자료로 참고할 수 있을 것으로 판단된다.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.31-37
• /
• 2009

본 연구에서는 고로슬래그 미분말과 플라이애쉬 혼입률에 따른 3성분계 콘크리트의 역학적 특성과 내구성을 평가하였다. 이를 위해 플라이애쉬 혼입률 변화(0%, 10%)와 고로슬래그 혼입률 변화(0%, 10%, 20%, 30%)를 실험변수로 하였으며, OPC와 TBC의 특성분석을 위하여 압축강도, 휨강도 그리고 내약품성 시험을 실시하였다. 실험결과, 압축강도와 휨강도에서 플라이애쉬 및 고로슬래그 미분말 혼입이 장기재령에서 강도 증진효과를 나타내는 것으로 평가되었다. 특히 플라이애쉬 10%와 고로슬래그 30%의 3성분계 콘크리트 사용은 매우 타당한 것으로 나타났다. TBC의 특수저항성은 재령 90일에서 매우 낮은 등급으로 나타났다. 또한 OPC에 혼입되는 플라이애쉬 및 고로슬래그 미분말은 투수저항성 및 화학저항성의 향상을 가져오는 것으로 나타났다.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.95-101
• /
• 2004

The purpose of this paper is to compare free-chloride content with water-soluble chloride in blast furnace cement(BSC) paste. The content of free-chloride in cement paste measured by pore solution analysis and water-soluble chloride measured by ASTM. The result of this study are as follows: 1. The concentration of chloride ion in pore solution of BSC-solidified matrix is almost as low as 43-71% compared to that of OPC-solidified matrix containing the same chloride content in cement paste. 2. The binding capacity of specimens, OPC Pl-P5, are 93.5-77%, but the binding capacity of specimens, BSC Pl-P5 are 97.1-86.1%, which is to be as high as 2-9.1% compared to OPC containing the same chloride content. 3. In terms of water-soluble chloride content in BSC paste are 15-31.7 percent of chloride addition but free-chloride content in pore solution are 2.9-13.9 percent of chloride addition. The free-chloride content in pore solution is 19.3-43.8 percent lower for the water-soluble chloride content in cement paste.

• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.11-19
• /
• 2000

It has been reported that few manufacturers of cement mortar for precast products use chemical and mineral admixture due to the absense of restrictions related to the application of admixture and the poor manufacturing facilities. Therefore, this paper is intended to contribute to the improvement of quality by investigating the properties of cement mortar for precast products using fly ash, blast furnace slag and AE water reducing agent. According to the test results. it was found that the cement mortar products using fly ash and AE water-reducing agent had better qualities than those of ordinary portland cement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.57-58
• /
• 2011

In the experiment, we add to NaOH, Ca(OH)₂ and Calcium Hydroxide as the Slag stimulus also mixed the cement stimulus such as NaSCN, TEA and CaCl₂ for improving compressive strenth of concrete which added the Blast Furnace Slag Powder at 1 and 3 days. In the result of strength test, It showed that 2percentage of activator 1 and 5percentage Ca(OH)₂, 1percentage of activator 3 and 5percentage of Ca(OH)₂ are higher than 100 percentage OPC.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2013

In this study, characteristics of the concrete replaced in large amount with blast furnace slag is analyzed by the microscopic analyses in the process of the mock-up testing to apply to the actual practice in the area of the general strength by activating a small amount of cement(25%) replaced in large amount of finely powered blast furnace slag.