• 한국안전학회지
• /
• 제31권3호
• /
• pp.8-15
• /
• 2016

The purpose of this study is to design a model with the structural stability so as not to lose the operational function due to structural plastic or fail of a sliding blast door by blast pressure to this aim, a numerical simulation was performed using full-size experiments and M&S (Modeling & Simulation) of the sliding blast door. The sliding blast door ($W3,000{\times}H2,500mm$) under the blast load is in the form of a sliding type 2-way metal grill, which was applied by a design blast pressure (reflected pressure $P_r$) of 17 bar. According to the experimental results of a real sliding blast door under blast load, the blast pressure reached the sliding blast door approximately 4.3 ms after the explosion and lasted about 4.0 ms thereafter. The maximum blast pressure($P_r$) was 347.7 psi (2,397.3 kPa), it is similar to the UFC 3-340-02 of Parameter(91 %). In addition, operation inspection that was conducted for the sliding blast door after real test showed a problem of losing the door opening function, which was because of the fail of the Reversal Bolt that was installed to prevent the shock due to rebound of the blast door from the blast pressure. According to the reproduction of the experiment through M&S by applying the blast pressure measurement value of the full-size experiments, the sliding blast door showed a similar result to the full-size experiment in that the reversal bolt part failed to lose the function. In addition, as the pressure is concentrated on the failed reversal bolt, the Principal Tensile Failure Stress was exceeded in only 1.25 ms after the explosion, and the reversal bolt completely failed after 5.4 ms. Based on the result of the failed reversal bolt through the full-size experiment and M&S, the shape and size of the bolts were changed to re-design the M&S and re-analyze the sliding blast door. According to the M&S re-analysis result when the reversal bolt was designed in a square of 25 mm ($625mm^2$), the maximum pressure that the reversal bolt receives showed 81% of the principal tensile failure stress of the material, in plastic stage before fail.

• 터널과지하공간
• /
• 제22권1호
• /
• pp.54-59
• /
• 2012

노천에서 폭파실험을 통해 납판 발파압계의 변형량을 계측하였다. 홉킨슨 바 시험장치의 가스 건으로 압력 실험하여 구한 보정 그래프에 계측데이터를 적용하여 폭풍압을 산출하였다. 그 결과를 CONWEP, DDESB 등 여러 가지 폭풍압 예측식과 대비하였다. 근거리 폭풍압의 실 계측 값은 폭풍압 예측식의 결과보다 최대압력이 낮게 나타났지만 거리에 따른 압력감쇠는 폭풍압 예측식보다 완만한 것을 확인할 수 있었다. 이는 기존 이론식으로 추정한 초근접 지점의 발파압은 부정확함을 의미한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.169-172
• /
• 2005

A numerical analysis was made In investigate the pressure diminution of a silencer with baffles for high pressure blast flow fields. Reynolds-Averaged Navier-Stokes equations were solved for an axisymmetric computational domain constructed by multi block Chimera grids. A blast flow field was calculated for the silencers that are with one and three baffles. The evolution of high pressure blast flow fields was observed by depicting calculated contours of pressure. It was found that the tested silencer could achieve 97.7 percent pressure diminution.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.91-94
• /
• 2004

A numerical analysis was made to investigate the intensity diminution of a simple silencer for high pressure blast flow fields. Reynolds-Averaged Wavier-Stokes equations were solved for an axisymmetric computational domain constructed by multi block Chimera grids. A blast flow field without the silencer was also calculated to validate the present numerical method. The evolution of high pressure blast flow fields was observed by depicting calculated contours of pressure and Mach number. It was found that the tested silencer could achieve 76 percent intensity diminution.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.363-381
• /
• 2012

This study is aimed at providing an efficient analytical model to obtain pressure- impulse diagram of one-way reinforced concrete slabs subjected to different shapes of air blast loading using single degree of freedom method (SDOF). A tri-linear elastic perfectly plastic SDOF model has been used to obtain the pressure-impulse diagram to correlate the blast pressure and the corresponding concrete flexural damage. In order to capture the response history for the slab, a new approximately SDOF method based on the conventional SDOF method is proposed and validated using published test data. The influences of pulse loading shape on the pressure-impulse diagram are studied. Based on the results, a pressure-impulse diagram generation method using SDOF and an analytical equation for the pressure-impulse diagram is proposed to different damage levels and different blast loading shapes.

• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.281-288
• /
• 2014

가스폭발은 해양플랜트 산업에서 발생할 수 있는 치명적인 사고 중 하나이며, 탑사이드 플랫폼은 폭발압력에 따른 구조 건전성을 확보해야만 한다. 따라서, 해양플랜트 분야에서는 이러한 폭발사고에 대비한 방폭설계에 관한 많은 연구가 수행되었지만, 여전히 추가적으로 세밀한 분석이 더 필요한 실정이다. 폭발 설계하중 계산과정에서 도출된 충격량은 CFD 해석결과로 계측된 폭발 압력 응답에서의 곡선 아래 면적의 절대 값에 의해 결정되어 진다. 하지만 가스폭발에서의 부압구간은 TNT 폭발이나 가스폭발과는 달리 상당부분 존재한다. 본 연구의 목표는 이러한 부압구간이 구조물의 거동에 미치는 영향에 대해서 분석하는 것이다. 따라서 방폭설계가 필수적으로 요구되어지는 FPSO 탑사이드의 방화벽을 폭발하중에 따른 구조 응답을 분석하기 위한 대상물로 선정하였다. 폭발 하중-시간이력 데이터는 FLACS를 이용한 폭발 시뮬레이션 과정을 통해 획득하였으며, LS-DYNA는 비선형 과도 응답해석을 위해 사용되었다.

• 화약ㆍ발파
• /
• 제41권4호
• /
• pp.29-40
• /
• 2023

암반발파는 광업, 터널공사, 지하 구조물 구축 등 다양한 분야에서 활용되고 있으며, 특히 지하공간의 활용이 증가하면서 암반발파 기술이 더 중요한 역할을 하고 있다. 암반발파 시 발파공에서 발생하는 발파공의 압력은 파쇄도, 발파진동 등에 직접적인 영향을 미치는 변수이며, 폭약의 성능 평가 및 발파 결과 예측에 있어서 가장 중요한 매개변수 중 하나이다. 이와 같은 발파공 압력은 몇몇 연구자들에 의해 연구가 수행된 바가 있지만, 폭약의 종류, 폭약량, 발파조건 등 실험조건으로 인하여 비교가 어려운 실정이다. 본 연구에서는 발파공 압력센서와 관측공 압력센서를 제작하여 단일공 발파 시 발파공과 관측공의 압력을 측정하였다. 실험결과를 바탕으로 발파공 주변 압력 전파특성과 발파진동 전파특성에 대해 고찰하였다.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.371-378
• /
• 2018

Internal detonation of a warhead inside a compartment of naval vessel can result in serious blast damages including plastic deformation and rupture of the structural members especially bulkhead due to the huge explosive impact pressure, fragments and high temperature flame. To secure watertight integrity and to prevent the domino-type flooding of neighbouring compartments caused by the rupture of bulkheads, it is necessary to develop the structural design technology of Blast Hardened Bulkheads(BHB) which can resist the blast impact pressure of threatening weapons to increase the survivability of naval vessels. This study dealt with the simplified structural response analysis of BHB under impact pressure of confined explosion and aimed to develop the efficient and rational design method of BHB and joint structures which can be applied at initial design stage. The present 1st report dealt with the phenomena of explosive detonation surveying the preceding experimental/theoretical research and the characteristics of time history of blast pressure including the peak value and duration time were examined. And to predict the large plastic deformation behaviors of BHB by the huge blast pressure reasonably, the plastic hinge method including the membrane effects was formulated. It was applied to the simplified structural design equations. The following report will deal with the application and adjustment process of the structural scantling equations to the actual BHB design and verification of validity of them.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.120-129
• /
• 2005

To analyze a blast effect of developed explosives, three different kinds of aluminized tastable explosives and melted cast explosive TNT were used. Conventional explosive TNT was used as a reference. Each tested explosive charge of 340mm diameter spherical type was initiated at the charge center with DXD-65(${\sim}750g$) booster and RP-87 EBW detonator. Thirteen piezo type pressure sensors were located at a range from 4 to 50m away from the charge. From the blast wave profiles, we calculated a peak blast pressure and impulse of the explosion. The calculated pressures and in pulses were converted to TNT Equivalent Weight(TEW) factor by the scaling ]aw method. The average TEW factors based on the blast pressure of TX-01, TX-02, TX-03, TX-04 were 1.298, 1.05, 1.266, 1.274 and the average TEW factors based on impulse were 1.504, 1.686, 1.640, 1.679. From the results, we concluded that TEW factors based on blast pressure and based on impulse of aluminized explosives were superior to TNT. This results are owing to the high contents of aluminum in formulations.

• 한국전산구조공학회논문집
• /
• 제29권1호
• /
• pp.67-75
• /
• 2016

본 논문에서는 폭발해석에서 주로 사용되는 폭발하중의 압력-시간 이력곡선과 폭발하중 산정식인 Conwep 모델을 소개하고, 이를 더욱 간편하게 계산할 수 있는 간략 폭발하중 산정식을 제안한다. 폭발해석에서 폭발하중은 일반적으로 압력-시간 이력곡선의 형태로 적용되며, 그에 대한 주요 값들은 폭발하중 산정식에 의해 계산된다. 대부분의 폭발해석에서 사용되는 폭발하중 산정식인 Conwep 모델은 환산거리(scaled distance)를 핵심변수로 하여 계산되는데, 그 계산 과정이 매우 복잡한 단점이 있다. 따라서 본 논문에서는 환산거리를 변수로 갖는 간략한 유리식을 사용하여 주요 값들을 계산하고, 단순화된 압력-시간 이력곡선으로 폭발하중을 산정할 수 있도록 제안하였다. 간략식을 찾는 과정에서 Conwep 모델의 계산 결과를 바탕으로 곡선 적합(curve fitting) 방식이 사용되었으며, 제안된 간략식에 의한 주요 값의 계산 결과는 Conwep 모델과 비교하여 1% 미만의 오차를 갖는다. 또한, 유한요소를 이용한 폭발해석에 적용하였으며 Conwep 모델을 적용한 결과와 비교를 통해 검증하였다.