• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.49-57
• /
• 2002

The effect of mechanical parameters on chemical mechanical polishing (CMP) of blanket and patterned aluminum thin films are investigated. CMP process experiments are conducted using the soft pad and the slurry mainly composed of acid solution and A1$_2$O$_3$ abrasive. The result for the blanket film showed that as the concentration of abrasive in slurry is increased, the surface roughness gets worse but the waviness gets better. The planarity of the patterned Al films is slowly improved by CMP when the width of and gap between the patterns are relatively small. It is tried to find the optimized CMP process conditions by that the patterned Al thin film can be planarized with fine surface. The most satisfiable film surface is obtained when the applied pressure is low (10kPa) and the abrasive concentration is relatively high (5wt%).

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.201-214
• /
• 1995

Design approach of upflow Anaerobic Sludge Blanket(UASB) process based on the biological kinetic parameters are known to be very difficult since the characteristics of the granular slut비e depends on the type of wastewater and size distribution of the granular sludge also depends on the upflow velocity in the UASB reactors. Furthermore, industrial wastewater containing toxic substances has been treated by UASB process without the clear knowledge of toxic effects on the granular slut형e. Hence, the present research was aimed on the intensive evaluation of biological kinetic parameters of the granular sludge in UASB reactor with and without toxic substance of 2, 4-dichlorophenol in order to present the basic design measures for UASB process design. The results could be summarized as follows. The biological kinetic parameters(k and Ks) considerably varied with the granular size of the sludge. Generally, 연e k and ks values of the granular sludge increased with the particle size of the granule. The biological kinetic parameters(k and Ks) of the granular sludge obtained from batch test were not applicable to design purpose of UASB process due to substrate diffusional limitation into the granular sludge in the completely mixed UASB reactors. The toxic effects on k and Ks greatly varied with the granular sixte. And as the toxicant concentration increased, the k value decreased while the Ks value increased. Inhibition constant(hi) for k with the toxicant of 2, 4-dichlorophenol varied from 0.5 to 2.3 depending on the granular sizes while the inhibition constant(Ki) for Ks varied from 20.7 to 80.1, showing the mixed inhibition.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.363-369
• /
• 2015

This study aims to characterize solid household waste and to present physicochemical characteristics of fresh leachate before landfilling in Kasba Tadla city, Morocco. Obtained results show that household waste produced in 2013 were about 11,787 tons, or 0.27 tons/capita/year. These wastes were composed essentially of organic materials (74%), paper (8%), plastics (9%), metals (1%), and glass (0.5%). However, monthly produced leachate ranges from a maximum of $130.92m^3$ during summer and a minimum of $21.88m^3$ in winter. Moreover, leachate treatment using Upflow Anaerobic Sludge Blanket technique was accompanied by a decrease in electrical conductivity, certainly related to leachate-sediment chemical exchanges. Otherwise, the same acidity reduction phenomenon occurs when pH value increased from 4.49 to 6.17 after 24 hours, confirming the system response since the early stages of treatment. In addition, temporal evolution of the treatment efficiency in terms of COD highlighted a very important reduction which reached 94% after 5 days with an average temperature of $25^{\circ}C$.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.95-105
• /
• 1998

This research was investigated which denitrification of wastewater containing nitrate, using upflow anaerobic sludge blanket process. The upflow anaerobic sludge blanket process is also used for both artifical and industrial wastewater. Main ingredients investigated in the artifical and industrial wastewater experiment were the determination of optimum organism/nitrate ratios, nitrate removal efficiency by various hydrogen donor addition and characteristics of granular sludge and gas production in case of various hydrogen donor addition. From the experimental results the following conclusions were made: In case of adding methanol, ethanol and sodium acetate as hydrogen donor granular sludge was formed 50 days after seeding. Average diameter of granular sludge was 4.0 mm and settling velocity was 37 cm/min. Production rate of gas 3.3 L/d in case of adding methanol as hydrogen donor in wastewater containing 150mg/L nitrate. However adding ethanol and sodium acetate as hydrogen donor, gas production rate were 2.2-2.7L/d respectively. In case of adding methanol as hydrogen donor treatability of artifical wastewater contained 150mg/L as nitrate was about 93%. But in addition of sodium acetate in wastewater contained 40mg.L as nitrate, nitrate removal efficiency was 80%.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.5
• /
• pp.345-351
• /
• 2004

We investigated the anaerobic ammonium oxidation (anammox) reaction in a lab-stale upflow anaerobic sludge blanket (UASB) reactor. Our aim was to detect and enrich the organisms responsible for the anammox reaction using a synthetic medium that contained low concentrations of substrates (ammonium and nitrite). The reactor was inoculated with granular sludge collected from a full-scale anaerobic digestor used for treating brewery wastewater The experiment was performed during 260 days under conditions of constant ammonium concentration ($50\;mg\;NH_4^+-N/L$) and different nitrite concentrations ($50{\~}150\;mg\;NO_2-N/L$). After 200 days, anammox activity was observed in the system. The microorganisms involved in this anammox reaction were identified as Candidatus B. Anammoxidans and K. Stuttgartiensis using fluorescence in situ hybridization (FISH ) method.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8S
• /
• pp.2587-2596
• /
• 2000

본 논문은 ATM-Forum의 WATM 기반 제3세대 무선 멀티미디어 망 환경에서 하나의 M.E.SW(Mobility Enabled ATM Switch)가 단순화된 많은 AP들을 관리하는 방안에 대하여 고려하였다. 또한 WATM 망 환경에서 가변 그룹 크기와 동적인 그룹 페이징 순서 방법을 사용하는 효율적인 페이징 방안을 제안하였다. 그리고 제안한 방안과 기존의 방안에 대해 성능을 평가 및 분석하였다. 여기서는 blanket-polling, sequential-polling 그리고 고정크기 그룹화 방안과 같은 대부분의 기존 방안들을 제안한 가변적이면서 동적인 그룹화 방안과 비교 분석하였다. 분석결과 offered-load가 낮은 환경에서는 단순한 blanket-polling paging 방안이 약간 더 우수한 성능을 보였다. 그러나 트래픽 밀도가 높아지면서 제안한 방안이 기존의 방안들 보다 더 우수한 성능을 보였다. 성능개선은 주로 가변적인 그룹 크기와 MS(Mobile Station)기반 동적인 페이징 순서 방안에 기인한다. 또한 제안한 방안은 MS에 대한 아주 간단한 이력정보와 최종적으로 통신한 AP 정보만이 필요하다. 따라서 이 방안은 효율적으로 구현하는 것이 가능하다.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.100-102
• /
• 2002

The demand for a better immobilization device has been increased in the radiation oncology field. Especially, it is essential to have a reliable and practical immobilization tool for the whole body radiosurgery and the IMRT (intensity modulated radiation therapy). A useful method to immobilize the abdomen for the external beam radiation treatment is developed. The air-injected balloon blanket (AIBB) was designed as an immobilization device. As the air was injected into it, it pressed down the patient's abdomen and fixed the patient. The AIBB played a role not only to grab the patients' motion, but also to increase the patients' setup reproducibility. Patients' movements due to the respiration were reduced and the reconstruction could be maximized. The experimental results revealed that the AIBB could be used for the clinic.

• Journal of Fashion Business
• /
• v.24 no.1
• /
• pp.60-74
• /
• 2020

A Podaegi is a square cloth used to carry a baby. Podaegi was an essential necessity for raising baby. However currently Koreans prefer baby-carriers, baby hip-seats, and equipments other than Podaegi. Recently, Podaegi is becoming popular around the world. Therefore, it is necessary to study Podaegi to inform Korea's traditional parenting culture product. In this research, 230 images of Podaegi were collected from paintings, photographs, postcards, films and artifacts from the late 18th century to 2000. The period of study was divided into three phases from the late Joseon Dynasty to before the opening of the port, from the opening of the port to before the liberation, and from the liberation to 2000. Types of Podaegi were categorized according to its shape and how to use. Transition process of Podaegi was examined. Podaegis were categorized into band type, blanket type, combination type, cheone type, modern type, and so on. From the late Joseon Dynasty to before the pre-openings, band type was used. From the opening of the port to liberation, all types of Podaegi appeared. Since the liberation, the use of band and blanket type has gradually decreased. Modern types have been the most popular since the 1960s. Materials of Podaegi became varied and Podaegi became a fashion-item. Later, modern Podaegi became the representative form of Korean traditional Podaegi.

• Journal of Environmental Health Sciences
• /
• v.32 no.2 s.89
• /
• pp.179-185
• /
• 2006

Effect of organic loading rate on UASB performance was evaluated under the renditions of some surface area/reactor volume ratio and different reactor diameter. At the low leading rate of 0.4 kg $COD/m^3{\cdot}d$, reactor performance was not affected by reactor diameter. At the organic loading rate of 6 kg $COD/m^3{\cdot}d$, however, volatile acid accumulation and low COD removal efficiency is observed in reactor having 6.4 cm diameter, while volatile acid is not accumulated at all and high COD removal efficiency is observed in reactor having 3 cm diameter. Such a difference of reactor performance depending on reactor diameter can be explained that sludge bed can be fluidized by evolved gas bubble in narrow reactor, while sludge bed ran not be fluidized by evolved gas bubble only in wide reactor. At a high organic loading rate of 20 kg $COD/m^3{\cdot}d$, it can be judged that there is no relation between reactor configuration and reactor performance because all reactors showed very low COD removal efficiencies regardless of reactor diameter. Narrow and tall type reactor is favorable condition for making sludge bed fluidization at a constant surface area/reactor volume ratio. Thus, it can be judged that reactor configuration and sludge bed fluidization have great influence to reactor performance.

• Knowledge Management Research
• /
• v.10 no.4
• /
• pp.1-15
• /
• 2009

국내에서 신용카드는 대표적인 지불 수단으로 정착되었으며 신용카드의 사용자와 신용카드의 발급 매수는 이미 포화상태에 도달해 있다. 이 같은 양적 성장은 정부의 신용카드 활성화 정책과 더불어 신용카드사 간의 과당 경쟁의 영향에 기인하고 있다. 신용차드의 사용층은 대부분의 성인 남녀로 확대되었으며, 특히 복수의 신용카드 소지자를 대상으로 자사가 발급한 신용차드를 사용하게 하기 위한 신용카드사 간의 경쟁이 치열한 상황이다. 이에 따라 신용카드사들이 경쟁사의 카드사용 회원을 자사의 회원으로 확보하는 젓이 불가피하며 마찬가지로 사용 중인 자사의 회원이 경쟁사로 이동하지 않도록 사전에 이탈 징후를 포착하여 유지 캠페인을 수행하는 것이 신용카드사 마케팅의 주요 활동이 되었다. 선행연구에서는 신용카드 회원의 이탈과 관련하여 다양한 데이터마이닝 기법을 이용한 이탈의 특성 분류 연구가 진행되었다. 본 연구는 회원 이탈에 영향을 주는 요인을 효과적으로 발견하기 위한 방법으로 베이지안 네트워크(Bayesian Network)를 활용한다. 특히, 베이지안 네트워크의 일종인 일반 베이지안 네트워크(General Bayesian Network)를 이용하여 회원의 이탈요인에 영향을 주는 요인들의 집합인 마코프 블랭킷(Makov Blanket)을 도출한다. 한편, 마코프 블랭킷에 포함된 변수를 이용해 민감도 분석을 수행하여 영향이 큰 요인을 찾아내고 이를 비즈니스 프로세스에 적용하여 실무적인 의의를 실증하고자 한다.