• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.2
• /
• pp.237-245
• /
• 2002

Purpose: This study was to examine the changes in cold discomfort according to the type of blanket used after surgery. Methods : Women scheduled for Cesarean Section were divided into two groups. After the surgery, 30 patients were covered with a warming blanket which was set at $40^{\circ}C$ by the warmer and the other 30 patients were covered with an ordinary blanket. Both group's cold discomfort was measured at 5 time points using a mercury thermometer, shivering scale. and subjective thermal sensation scale. Data were analyzed by using mean scores with t-test, paired t-test using the SPSS/WIN program. Result: At 30 min after being covered with the blanket, the axillary temperature had returned to the pre-operation temperature in both groups. At 45 min after being covered with the blanket, the women in the warming blanket group had no further shivering but for those in the ordinary blanket group shivering continued. At 45 min after being covered with the blanket, the women in the warming blanket group had returned to the condition before surgery, but those in the ordinary blanket group continued to complain of cold sensation. Conclusion: This study suggests that use of a warming blanket helps to relieve cold discomfort following surgery. This study is also expected to enhance understanding of the Importance of subjective data by exploring the difference between subjective complaints and objective data about cold discomfort.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.470-474
• /
• 1993

This study carried out to get some fundamental data for designing lightweight bedding. In This study, the wool blanket, polyester/cotton blended blanket and down quilt were manufactured with a varied materials, structural factors such as yam count, fabric density respectivelyarn. And also, the thermal insulation value of the bedding were measured by warmth retaining tester. In addition, this paper examines the influence of varying materials, structural factors and blanket layers on the thermal insulation effect of the bedding. The main results obtained from this study are as follow : 1. The design of lightweight blankets make an attempting with a varying materials and structural factors such as yam count, fabric densityarn. 2. Almost, the design of lightweight blankets for polyester/cotton blended blanket and down quilt make an attempting without reduction in thermal insulation values. 3. The 6 layers of blanket have less thermal insulation value than the 6 times of blanket for under a layer have. About 27~32% decrease is observed in thermal insulation value of blanket for under 6 layer. 4. The thermal insulation value and areal weight of blankets have a positive relation between the thermal insulation value(Y) and areal weight(X) is based on the following equation. wool blanket : Y = 1.0850X + 0.4188 (r = 0.9992) PIC blended blanket : Y = 0.8845X + 0.3034 (r = 0.9999)

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.38-48
• /
• 2020

The shaking-off the dust from balustrade of higher stories may cause the higher risk of falling accident rate. Main purpose of this study was to quantify an effect of balustrade heights and blanket types on possibility of falling accident relative to one's motor controllability during shaking-off the dust of the blanket from balcony. Female participants, who consisted of total 10 under condition of balustrade height of 3 kinds (90 cm, 110 cm, 130 cm) and blanket types (0.4 kg, 1.6 kg, 3 kg, 200^⁎230 cm), performed repetitively the task of shaking-off the dust of the blanket. Vertical position and velocity of center of mass due to increase of blanket weigh in case of balustrade height of 90 cm was increased, but vertical ground reaction force was decreased swiftly. That is, the higher balustrade height was, the less distance difference between center of mass and center of pressure was.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3150-3163
• /
• 2023

To improve the performance of blanket: maximizing the tritium breeding rate (TBR) for tritium self-sufficiency, and minimizing the Dose of backplate for radiation protection, most previous studies are based on manual corrections to adjust the blanket structure to achieve optimization design, but it is difficult to find an optimal structure and tends to be trapped by local optimizations as it involves multiphysics field design, which is also inefficient and time-consuming process. The artificial intelligence (AI) maybe is a potential method for the optimization design of the blanket. So, this paper aims to develop an intelligent optimization method based on an improved multi-objective NSGA-III algorithm and an adaptive BP neural network to solve these problems mentioned above. This method has been applied on optimizing the radial arrangement of a conceptual design of CFETR HCSB blanket. Finally, a series of optimal radial arrangements are obtained under the constraints that the temperature of each component of the blanket does not exceed the limit and the radial length remains unchanged, the efficiency of the blanket optimization design is significantly improved. This study will provide a clue and inspiration for the application of artificial intelligence technology in the optimization design of blanket.

• Fire Science and Engineering
• /
• v.15 no.2
• /
• pp.53-58
• /
• 2001

This study was undertaken to evaluate the performance of flame retardant for fire precaution from sparks at welding-cutting process in industry sites such as shipbuilding yard and chemical factory. As the results of the performance experiment, six kinds of welding blanket in samples that are used commercially had enough in the performance of flame retardant. Nevertheless, the performance to fire precaution un welding blanket shows that the coaling product of two kinds with fiber glass is not sufficient. The lower oxygen index to welding blanket is considered that it is more than 30 in domestic standard. We suggested that the performance improvement of flame retardant for welding blanket need continuously, and the guideline of the flame retardant to welding blanket should be considered and established.

• Journal of the Korean Institute of Gas
• /
• v.17 no.4
• /
• pp.77-82
• /
• 2013

The construction of LNG storage tanks has been increased due to the expansion of LNG demand. LNG tanks which consist of an inner cylindrical 9%Ni metal tank and reinforced concrete, are insulated with perlite powder and resilient blanket for absorbing the perlite pressure in insulation annulus between two inner and outer tanks. This study tries to find out the design specifications and characteristics for blanket thickness and design pressure. The results show that the design basis for the blanket thickness should be approximately 30% to 40% of annulus width and the design pressure be applied below 2,200~2,700Pa with blanket thickness.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.6
• /
• pp.5-17
• /
• 2022

The performance of the relief wells installed for the purpose of controlling seepage of the dam embankment is affected by various parameters such as diameter, spacing, penetration rate, permeability coefficient of the ground, thickness of the foundation layer. Therefore, when the relief wells are adopted for the purpose of reducing seepage pressure, these parameters should be sufficiently reviewed to determine the installation specifications of the relief wells. This study evaluated the effect of the length of the geosynthetics blanket on the performance of the relief wells installed in the downstream part of the dam embankment with blankets in the upstream and downstream part of the dam embankment as countermeasure methods to control seepage of the dam embankment. In the relationship between the length of the upstream and downstream blanket and the discharge, the discharge of the relief wells decreases as the length of the upstream blanket increases, and on the other hand, the discharge of the relief wells decreases as the length of the downstream blanket increases. In the upper and lower blanket length-spacing relationship, as the length of the upstream blanket increases, the spacing of the relief wells increases and as the length of the downstream blanket increases, the spacing of the relief wells decreases. Therefore, when installing the relief wells in parallel with the blanket, it was found that increasing the length of the upstream blanket is more efficient than increasing the length of the downstream blanket in order to minimize the discharge of seepage discharge and to ensure economic feasibility by wider installation of the relief wells.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.7 no.1
• /
• pp.16-29
• /
• 2000

The purpose of this study was to examine the effects of a warmed blanket on relieving the cold discomfort after Cesarean Section delivery. A nonequivalent control group pre-test/post-test design was used for this quasi-experimental study. Sixty women were recruited for this study and divided by two groups: experimental and control groups. Blankets warmed to $40^{\circ}C$ were applied to the women in the experimental group for one hour and unwarmed blankets were applied to the control group. Using Abbey's shivering scales, subjective thermal sensation score, and Celsius mercury thermometer, cold discomfort was measured at four time points: 1) baseline measure (at the point the blanket was applied) 2) 15 min. later, 3) 30 min. later, and 4) 45 min. after application. Data were analyzed using SPSS/WIN and t-test and MANOVA were used to examine the effects of the warmed blanket for relieving cold discomfort. The results of the study are as follows. The experimental group had less cold discomfort than the control group(Wilts's value =0.580, p=0.000) at the 45 minute point after blanket application. the Experimental group reported less shivering and subjective thermal sensation than the control group. Shivering scores showed significant differences between the two groups at each of the four time points (baseline, 15 min., 30 min., and 45 min.) and subjective thermal sensation score showed significant differences between two groups at 45 minutes. after blanket application. In conclusion, the application of a warmed blanket was more effective on shivering and subjective thermal sensation than body temperature measured by objective means. Because women in this study were in the normal range of body temperature, differences in the objective body temperature between the two groups may not be sensitive enough to be detected. Even though differences in objective body temperature were not found, reduced subjective discomfort for low body temperature may be a sufficient significant finding in for nurse clinicians to utilize this method on their practice. Further studies in this area are needed to support these findings.

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.61-66
• /
• 2019

The purpose of this study was to improve the unstable treatment posture by placing the Carbon fabric blanket on the couch which was used for the patient fixation for the unstable posture from the severe pain caused by the neuromuscular pressure of the spinal metastatic cancer patient and to analyze the dose difference caused by the energy loss of high energy radiation. Using a linear accelerator, a FC-65G was installed at a depth of 5 cm at a solid phantom at 6 MV and 10 MV energies. The SAD was 100 cm, Gantry angle was $0^{\circ}$, a Cotton and Carbon blanket with a thickness of 1 cm on the couch, The blankets were placed on the couch and the dose was measured according to field size. For the dose measurement, and the dose was measured at 100 MU each time, and the mean value was calculated by repeating the measurement three times in order to reduce the error. The results showed that the difference rate in dose between Carbon blanket and Cotton blanket was respectively -0.54% and -0.75% based on the absence of the blanket(Non). Therefore, it is considered that the use of Carbon fabric blanket, which reduces the patient's pain and does not affect the depth dose, may be useful during radiation therapy of the spine metastasis cancer.

• 연구논문집
• /
• s.32
• /
• pp.15-22
• /
• 2002

In offset or intaglio printing machine, it's operated with combination of blanket cylinder and impression cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical impact noise when the two cylinders encounter with the grooves. So, in this study, we developed a printing pressure control algorithm with hydraulic servo control system. We also proposed simulation model of experimental device to analysis the throw on force response of hydraulic servo actuator. Finally, we have reduced the mechanical impact noise and improved printing quality with a groove detecting signal and PI control of hydraulic servo actuator.