• 기본간호학회지
• /
• 제9권2호
• /
• pp.237-245
• /
• 2002

Purpose: This study was to examine the changes in cold discomfort according to the type of blanket used after surgery. Methods : Women scheduled for Cesarean Section were divided into two groups. After the surgery, 30 patients were covered with a warming blanket which was set at $40^{\circ}C$ by the warmer and the other 30 patients were covered with an ordinary blanket. Both group's cold discomfort was measured at 5 time points using a mercury thermometer, shivering scale. and subjective thermal sensation scale. Data were analyzed by using mean scores with t-test, paired t-test using the SPSS/WIN program. Result: At 30 min after being covered with the blanket, the axillary temperature had returned to the pre-operation temperature in both groups. At 45 min after being covered with the blanket, the women in the warming blanket group had no further shivering but for those in the ordinary blanket group shivering continued. At 45 min after being covered with the blanket, the women in the warming blanket group had returned to the condition before surgery, but those in the ordinary blanket group continued to complain of cold sensation. Conclusion: This study suggests that use of a warming blanket helps to relieve cold discomfort following surgery. This study is also expected to enhance understanding of the Importance of subjective data by exploring the difference between subjective complaints and objective data about cold discomfort.

• 한국의류학회지
• /
• 제17권3호
• /
• pp.470-474
• /
• 1993

This study carried out to get some fundamental data for designing lightweight bedding. In This study, the wool blanket, polyester/cotton blended blanket and down quilt were manufactured with a varied materials, structural factors such as yam count, fabric density respectivelyarn. And also, the thermal insulation value of the bedding were measured by warmth retaining tester. In addition, this paper examines the influence of varying materials, structural factors and blanket layers on the thermal insulation effect of the bedding. The main results obtained from this study are as follow : 1. The design of lightweight blankets make an attempting with a varying materials and structural factors such as yam count, fabric densityarn. 2. Almost, the design of lightweight blankets for polyester/cotton blended blanket and down quilt make an attempting without reduction in thermal insulation values. 3. The 6 layers of blanket have less thermal insulation value than the 6 times of blanket for under a layer have. About 27~32% decrease is observed in thermal insulation value of blanket for under 6 layer. 4. The thermal insulation value and areal weight of blankets have a positive relation between the thermal insulation value(Y) and areal weight(X) is based on the following equation. wool blanket : Y = 1.0850X + 0.4188 (r = 0.9992) PIC blended blanket : Y = 0.8845X + 0.3034 (r = 0.9999)

• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.38-48
• /
• 2020

The shaking-off the dust from balustrade of higher stories may cause the higher risk of falling accident rate. Main purpose of this study was to quantify an effect of balustrade heights and blanket types on possibility of falling accident relative to one's motor controllability during shaking-off the dust of the blanket from balcony. Female participants, who consisted of total 10 under condition of balustrade height of 3 kinds (90 cm, 110 cm, 130 cm) and blanket types (0.4 kg, 1.6 kg, 3 kg, 200^⁎230 cm), performed repetitively the task of shaking-off the dust of the blanket. Vertical position and velocity of center of mass due to increase of blanket weigh in case of balustrade height of 90 cm was increased, but vertical ground reaction force was decreased swiftly. That is, the higher balustrade height was, the less distance difference between center of mass and center of pressure was.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3150-3163
• /
• 2023

To improve the performance of blanket: maximizing the tritium breeding rate (TBR) for tritium self-sufficiency, and minimizing the Dose of backplate for radiation protection, most previous studies are based on manual corrections to adjust the blanket structure to achieve optimization design, but it is difficult to find an optimal structure and tends to be trapped by local optimizations as it involves multiphysics field design, which is also inefficient and time-consuming process. The artificial intelligence (AI) maybe is a potential method for the optimization design of the blanket. So, this paper aims to develop an intelligent optimization method based on an improved multi-objective NSGA-III algorithm and an adaptive BP neural network to solve these problems mentioned above. This method has been applied on optimizing the radial arrangement of a conceptual design of CFETR HCSB blanket. Finally, a series of optimal radial arrangements are obtained under the constraints that the temperature of each component of the blanket does not exceed the limit and the radial length remains unchanged, the efficiency of the blanket optimization design is significantly improved. This study will provide a clue and inspiration for the application of artificial intelligence technology in the optimization design of blanket.

• 한국화재소방학회논문지
• /
• 제15권2호
• /
• pp.53-58
• /
• 2001

본 연구에서는 조선 및 화학공장 등 산업현장에서 용접·용단작업 공정에서 비산 되는 불티에 의한 화재 예방을 위하여 불티 차단막에 관한 방염 및 난연 성능 평가를 실시하였다. 방염성능 실험결과 기존제품의 용접불티 차단막 6종 모두 충분한 방염성능을 갖고 있었다. 그러나, 용접·용단 불꽃에 의한 난연성 실험 결과 섬유유리에 수지코팅한 제품 2종은 용접·용단 불티에 대한 화재예방성능이 부족한 것으로 나타났다. 용접 불티 차단막의 최소산소지수의 국내기준은 30이상으로 고려하는 것이 좋을 것으로 사료된다. 용접 불티 차단막의 성능향상을 위한 제속적인 연구가 필요하며, 방염 및 난연성능 기술지침 개발의 기초자료로서 활용될 수 있을 것으로 사료된다.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.77-82
• /
• 2013

LNG의 수요 증가와 함께 LNG기지의 저장탱크의 건설도 증가하고 있다. 내부탱크는 9%Ni강재 그리고 외부탱크는 콘크리트가 적용되는 형식의 LNG탱크의 단열은 내외부 탱크 사이에 펄라이트 분말이 충전되며, 이 펄라이트의 압력을 흡수하기 위하여 탄성이 있는 블랭킷을 사용한다. 본 연구에서는 이 블랭킷을 적용함에 있어 그 특성과 내부 탱크에 미치는 압력 등을 해석, 고찰하여 블랭킷의 적정 설계두께, 설계압력 등 설계기준을 얻고자 하였다. 연구결과, 블랭킷의 적정 두께설계 기준은 내외부 탱크 간격의 30~40%가 되었으며, 설계압력 기준은 블랭킷 두께에 따라 2,200~2,700Pa 이하가 적절한 것으로 얻어졌다.

• 한국지반환경공학회 논문집
• /
• 제23권6호
• /
• pp.5-17
• /
• 2022

저수지 제방의 침투제어를 목적으로 설치하는 감압정의 성능은 감압정의 직경, 간격, 관통율, 지반의 투수계수, 기초지반 지층의 두께 등 다양한 변수에 의해 영향을 받는다. 따라서 침투수압 경감을 목적으로 감압정을 채택하는 경우 이러한 매개변수를 충분히 검토하여 감압정의 설치제원을 결정해야 한다. 본 연구에서는 저수지 제방의 침투제어를 위한 대책공법으로 제방의 하류부에 감압정과 제방의 상·하류부에 토목섬유 블랭킷(이하 블랭킷)을 병행하여 설치하는 경우 블랭킷의 길이가 감압정의 성능에 미치는 영향을 평가하였다. 상·하류 블랭킷 길이-유량 관계에서 상류 블랭킷의 길이가 증가할수록 감압정에서 배출되는 유량은 감소하며, 하류 블랭킷의 길이가 증가할수록 감압정의 배출 유량은 증가하는 것으로 나타났다. 상·하류 블랭킷 길이-간격 관계에서 상류 블랭킷의 길이가 증가할수록 감압정의 간격은 증가하며, 하류 블랭킷의 길이가 증가할수록 감압정의 간격은 감소하는 것으로 나타났다. 따라서 블랭킷과 감압정을 병행하여 설치함으로써 댐제방의 침투안정성을 확보하고자 하는 경우 침투유량의 배출을 최소화하고 감압정의 간격 확대를 통한 경제성 확보를 위해서는 상류의 블랭킷 길이 증가가 하류의 블랭킷 길이 증가보다 더 효율적인 것으로 나타났다.

• 기본간호학회지
• /
• 제7권1호
• /
• pp.16-29
• /
• 2000

The purpose of this study was to examine the effects of a warmed blanket on relieving the cold discomfort after Cesarean Section delivery. A nonequivalent control group pre-test/post-test design was used for this quasi-experimental study. Sixty women were recruited for this study and divided by two groups: experimental and control groups. Blankets warmed to $40^{\circ}C$ were applied to the women in the experimental group for one hour and unwarmed blankets were applied to the control group. Using Abbey's shivering scales, subjective thermal sensation score, and Celsius mercury thermometer, cold discomfort was measured at four time points: 1) baseline measure (at the point the blanket was applied) 2) 15 min. later, 3) 30 min. later, and 4) 45 min. after application. Data were analyzed using SPSS/WIN and t-test and MANOVA were used to examine the effects of the warmed blanket for relieving cold discomfort. The results of the study are as follows. The experimental group had less cold discomfort than the control group(Wilts's value =0.580, p=0.000) at the 45 minute point after blanket application. the Experimental group reported less shivering and subjective thermal sensation than the control group. Shivering scores showed significant differences between the two groups at each of the four time points (baseline, 15 min., 30 min., and 45 min.) and subjective thermal sensation score showed significant differences between two groups at 45 minutes. after blanket application. In conclusion, the application of a warmed blanket was more effective on shivering and subjective thermal sensation than body temperature measured by objective means. Because women in this study were in the normal range of body temperature, differences in the objective body temperature between the two groups may not be sensitive enough to be detected. Even though differences in objective body temperature were not found, reduced subjective discomfort for low body temperature may be a sufficient significant finding in for nurse clinicians to utilize this method on their practice. Further studies in this area are needed to support these findings.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권1호
• /
• pp.61-66
• /
• 2019

The purpose of this study was to improve the unstable treatment posture by placing the Carbon fabric blanket on the couch which was used for the patient fixation for the unstable posture from the severe pain caused by the neuromuscular pressure of the spinal metastatic cancer patient and to analyze the dose difference caused by the energy loss of high energy radiation. Using a linear accelerator, a FC-65G was installed at a depth of 5 cm at a solid phantom at 6 MV and 10 MV energies. The SAD was 100 cm, Gantry angle was $0^{\circ}$, a Cotton and Carbon blanket with a thickness of 1 cm on the couch, The blankets were placed on the couch and the dose was measured according to field size. For the dose measurement, and the dose was measured at 100 MU each time, and the mean value was calculated by repeating the measurement three times in order to reduce the error. The results showed that the difference rate in dose between Carbon blanket and Cotton blanket was respectively -0.54% and -0.75% based on the absence of the blanket(Non). Therefore, it is considered that the use of Carbon fabric blanket, which reduces the patient's pain and does not affect the depth dose, may be useful during radiation therapy of the spine metastasis cancer.

• 연구논문집
• /
• 통권32호
• /
• pp.15-22
• /
• 2002

In offset or intaglio printing machine, it's operated with combination of blanket cylinder and impression cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical impact noise when the two cylinders encounter with the grooves. So, in this study, we developed a printing pressure control algorithm with hydraulic servo control system. We also proposed simulation model of experimental device to analysis the throw on force response of hydraulic servo actuator. Finally, we have reduced the mechanical impact noise and improved printing quality with a groove detecting signal and PI control of hydraulic servo actuator.