• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.20-23
• /
• 2001

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper, Stripes of grooves of which width 48${\mu}{\textrm}{m}$, depth 124$\mu\textrm{m}$ , pitch 274$\mu\textrm{m}$ was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6nm Ra in grooving Si. Barrier ribs were formed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waveness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.35-44
• /
• 1997

The most critical factor in determining which type of implant to be used would be the available bone of the patient. Usually a minimum of 5mm in the bone width and 8mm in the bone height is necessary to ensure primary implant stability and maintain the integrity of bone contact surface. Placement of implant is limited by the several anatomic strutures such as maxillary sinus, floor of the nose, inferior alveolar neurovascular bundle and nasopalatine foramen, etc. When severe resorption of alveolar ridge is encountered, implant placement would be a problematic procedure. A number of techniques to improve the poor anatomic situations have been proposed. This article reports 4 cases of patients using surgical procedures such as blade implant technique, cortical split technique in the anterior maxillary area, sinus lifting and lateral repositioning of inferior alveolar nerve, We treated dental implant candidates with unfavorable alveolar ridge utilizing various surgical techniques, resulted in successful rehabilitation of edentulous ridge.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.661-669
• /
• 1999

The evolutionary structure of a tip vortex in the initial period have been investigated by the two-dimensional LDV system. Circumferential and axial components of mean velocities, their turbulences and Reynolds stresses were measured by the phase averaging technique at seven different wake ages within one revolution of the rotor. Core growth was also analyzed. It was resulted that circumferential velocity components showed a Rankine combined vortex shape and their circulation profiles viewed in the radial direction were close to the n = 2 model of Vatistas' algebraic formula, while axial velocity components seemed to have the Gaussian profiles In these measured ranges with the base width of three times of core radii. Peaks of circumferential velocities and core radii showed distinct asymmetric behaviors before the wake age of $150^{\circ}$ over inboard and outboard sides of the slipstream, but they became symmetric afterwards. Turbulence profiles which had two peaks Inside the core radii in the earlier wake age were also changed to single peaks after $150^{\circ}$. These trends imply that the tip vortex was barely mature at this wake age.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.27-33
• /
• 2012

A marine propeller is designed for preventing cavitation priority. Cavitation is a phenomenon which is defined as the vibration or noise by dropping the pressure on the high-speed rotation of the propeller. There has to be a enough thrust on the low-speed rotation for preventing cavitation. Thus, it has to be considered in the increasing of the number of blade and the angle of wing to design the propeller. In addition, flow resistance will be increasing by narrowing the width between blades. So high quality surface roughness of the hub to minimize flow resistance is required. Interference problems with tool and neighboring surfaces often take place from this kind of characteristics of the propeller. During 5-Axis machining of these propellers, the excessive local interference avoidance, necessary to avoid interference, leads to inconsistency of cutter posture, low quality of machined surface. Therefore, in order to increase the surface quality, it is necessary to minimize the cutter posture changes and create a continuous tool path while avoiding interference. This study, by using a MC-space algorithm for interference avoidance and a MB-spline algorithm for continuous control, is intended to create a 5-Axis machining tool path with excellent surface quality. Also, an effectiveness is confirmed through a verification manufacturing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.473-476
• /
• 2012

Energy is one of the most important resources for human society and the history of its development and use have been part of human life. Especially as the need of eco-friendly energy development has been on the rise, the interest in alternative energy has grown consistently. This paper, so as to identify the energy output and efficiency from a micro vertical-axis wind generator. by utilizing a smart phone, presents a system to analyze the production efficiency of real-time energy, according to the wind velocity and the width and the material of the blade of the climate change system in the Meteorological Office.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.9
• /
• pp.11-15
• /
• 2010

In this study, to fabricate a low-resistance and high optical transparency electrode film, the following steps were performed: the design and manufacture of electroforming stamp, the fabrication of a thermal roll-imprinted polycarbonate (PC) patterned films, the filled low-resistance Ag paste using doctor blade process on patterned PC films and spin coating by conductive polymers. As a result of PC films imprinted line width of $26.69{\pm}2\;{\mu}m$, channel length of $247.57{\pm}2\;{\mu}m$, and pattern depth of $7.54{\pm}0.2\;{\mu}m$. Ag paste to fill part of the patterned film with conductive polymer coating and then the following parameters were obtained: a sheet resistance of $11.1\;{\Omega}/sq$ optical transparency values at a wavelength of 550 nm was 80.31 %.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.4
• /
• pp.19-25
• /
• 1979

Lowland and upland rice were grown under the both of lowland and upland conditions. Ecological variations in plant characteristics such as plant height, leaf emergence, length of leaf blade, leaf angle, leaf width, heading date, culm length, panicle length and straw weight were observed. Plant height, leaf emergence and heading were accelerated under the lowland condition for both lowland and upland varieties, while leaf length, leaf angle, leaf breadth, number of leaves were increased in upland condition for both lowland and upland varieties.

• Korean Journal of Acupuncture
• /
• v.36 no.4
• /
• pp.300-307
• /
• 2019

Objectives : This study details on a case of acupotomy for relapsed lateral malleolar bursitis. Methods : A 71-year-old woman with lateral malleolar bursitis was treated with acupotomy twice in an outpatient setting. A sterilized, disposable, blade width 0.5 mm × needle length 50 mm sized acupotomy was administered on GB40 and BL62 on each visit. Pain intensity assessment using Numeric Rating Scale (NRS) and the response evaluation criteria was conducted right after each treatment. Results : Pain on NRS declined from 5 to less than 1 after twice of acupotomy treatment. This result was regarded as 'Complete Response' using the response evaluation criteria. There were no side effects during whole treatment procedure at all. Conclusions : It is turned out that acupotomy can have a positive clinical effect on lateral malleolar bursitis in this case without any adverse effect. Further controlled studies on acupotomy for lateral malleolar bursitis are required for clinical application.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.385-390
• /
• 2003

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Wavier-Stokes equations with standard $k-{\varepsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.201-205
• /
• 1984

For the forage sorghum breeding, 22 American M.S. lines and 58 inbred lines were sown in pots, and 80 local varieties in field in 1978. Their agronomic characteristics were as follow; 1. All of the tested lines/varieties were headed from 22nd to 26th of July. Varieties of 69-86% were headed from 17th to 31st of July. All of lines/varieties began their flowering within 3-5 days after heading and native varieties had wide variance in heading and flowering. 2. The plant height of M.S. lines, inbred lines and local varieties were 86-114 cm, 81-190 cm and 142-289 cm, respectively. Leaf blade length of M.S. lines and inbred lines were ranged from 52.2 to 53.4 cm and local varieties 70.7 cm. Average stem diameter of M.S. lines and inbred lines were ranged from 8.81 to 7.74 mm and local varieties 11.3 mm. 3. Stem diameter were significantly correlated with leaf length and leaf blade width. The internode length were also significantly correlated with plant height. Especially, all characteristics in local varieties were correlated with each other.