• 한국재료학회지
• /
• 제29권11호
• /
• pp.709-714
• /
• 2019

In order to observe the microstructure and morphology of porous titanium -oxide thin film, deposition is performed under a higher Ar gas pressure than is used in the general titanium thin film production method. Black titanium thin film is deposited on stainless steel wire and Cu thin plate at a pressure of about 12 Pa, but lustrous thin film is deposited at lower pressure. The black titanium thin film has a larger apparent thickness than that of the glossy thin film. As a result of scanning electron microscope observation, it is seen that the black thin film has an extremely porous structure and consists of a separated column with periodic step differences on the sides. In this configuration, due to the shadowing effect, the nuclei formed on the substrate periodically grow to form a step. The surface area of the black thin film on the Cu thin plate changes with the bias potential. It has been found that the bias of the small negative is effective in increasing the surface area of the black titanium thin film. These results suggest that porous titanium-oxide thin film can be fabricated by applying the appropriate oxidation process to black titanium thin film composed of separated columns.

• 열처리공학회지
• /
• 제22권5호
• /
• pp.275-281
• /
• 2009

The microstructure of copper films prepared by a sputtering apparatus, which was fabricated to enhance the shadowing effect, was investigated by scanning electron microscopy. Black copper films were deposited on copper wires at an Ar pressure of 10 Pa. The black films had an extremely porous structure composed of separated columns. This structure is quite similar to that of black titanium films prepared by cylindrical magnetron sputtering. These results suggest that the porous structure composed of separated columns is easily formed for metal films by enhancing the shadowing effect.

• 전기화학회지
• /
• 제5권1호
• /
• pp.21-26
• /
• 2002

비정질 루테늄 산화물을 사용한 수퍼캐패시터를 개발하였다. 삼염화루테늄 수화물$(RuCl_3{\cdot}xH_2O)$로부터 제조한 비정질의 이산화루테늄 수화물$(RuO_2{\cdot}nH_2O)$을 사용하여 수퍼캐패시터 전극을 제조하였다. 집전체로는 티타늄 및 STS 304박막에 비해 보다 넓은 전위창을 가지는 탄탈륨 박막을 사용하였다. 제조한 전극과 4.8M 황산 전해액을 사용하여 수퍼캐패시터를 제조하였다. 전극의 비정전용량은 순환전위전류분석에서 미분 최대 값으로 산화 및 환원 과정 각각 710 및 $645\;F/g-RuO_2{\cdot}nH_2O$이었으며, 평균값은 $521\;F/g-RuO_2{\cdot}nH_2O$으로 나타났다. 수퍼캐패시터를 포화카로멜기준전극에 대하여 0.5 V로 protonation level을 조정하고, 충방전 시험한 바, $151\;F/g-RuO_2{\cdot}nH_2O$의 비정전용량을 나타내었다.