• Corrosion Science and Technology
• /
• v.13 no.6
• /
• pp.224-232
• /
• 2014

Effect of pretreatments on the graphene coated bipolar plate of proton exchange membrane fuel cell(PEMFC) was investigated in simulated environments for PEMFC by using electrochemical measurement techniques. Interfacial contact resistance(ICR) between the graphene coated bipolar plate and the gas diffusion layer(GDL) was measured. The value of ICR decreased with an increase in compaction stress($20N/cm^2{\sim}220N/cm^2$). ICR of graphene coated bipolar plate was higher than that of bare 316L stainless steel. However, Potentiodynamic measurement results showed that the corrosion resistance of graphene coated bipolar plate was higher than that of bare 316L stainless steel. $H_2SO_4$ acid pretreatment was the most effective among various pretreatments. The lowest ICR and the corrosion current density were obtained when using $H_2SO_4$ solution pretreatment.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.226-229
• /
• 2004

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.11a
• /
• pp.3-9
• /
• 2003

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.476-482
• /
• 2006

This paper studied the recovery of organic acid from organic acid salt by using bipolar membrane electrodialysis. Acetic acid and lactic acid was used as for organic acid. Organic acid concentration, sodium hydroxide concentration and pH values were measured at various current density. Organic acid salt was effectively converted to organic acid and sodium hydroxide. Based on the experimental results, mathematical models were developed, in which time changes in ion balance were considered. Model predictions of organic acid concentration, sodium hydroxide concentration and pH values were in good agreement with the experimental data.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.55.2-55.2
• /
• 2009

A polymer electrolyte membrane (PEM) fuel cell has been getting large interest as a typical issue in useful applications. The PEMFC is composed of a membrane, catalyst and the bipolar plate. SnOx:F films on SUS316 stainless steel were prepared as a function of substrate with using electron cyclotron resonance-metal organic chemical vapor deposition (ECR-MOCVD) in order to achieve the corrosion-resistant and low contact resistance bipolar plates for PEM fuel cells. The SnOx:F films coated on SUS316 substrate at surface plasma treatment for excellent stability, before/after heat treatment for good crystalline structure and microwave power for were characterized by X-ray diffraction (XRD), auger electron microscopy (AES) and field emission-scanning electron microscopy (FE-SEM). The SnOx:F film coated on SUS316 substrate with various process parameters were able to observe optimum interfacial contact resistance (ICR) and corrosion resistance. It can be concluded that fluorine-doping content plays an important function in electrical property and characteristic of corrosion-protective film.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2015

A stack in the proton exchange membrane fuel cell (PEMFC) consists of bipolar plates, a membrane electrode assembly, a gas diffusion layer, a collector and end plates. High current density is usually obtainable partially from uniform temperature distribution in the fuel cell. A size optimization method considering the thermal expansion effect of stacked plates was developed on the basis of finite element analyses. The thermal stresses in end, bipolar, and cooling plates were calculated based on temperature distribution obtained from thermal analyses. Finally, the optimization method was applied and optimum thicknesses of the three plates were calculated considering both fastening bolt tension and thermal expansion of each unit cell (72 cells, 5kW). The optimum design considering both thermal and mechanical loads increases the thickness of an end plate by 0.64-0.83% the case considering only mechanical load. The effect can be enlarged if the number of stack increases as in an automotive application to 200-300 stacks.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.242-251
• /
• 2023

The electrochemical corrosion behaviors of 304 stainless steels (STSs) with various coatings (organic coating and dry coating) were examined, and their applicability as bipolar plates in polymer electrolyte membrane fuel cells (PEMFCs) was validated. The results showed that the organic-coated samples had a significant decrease in anodic and cathodic current density compared to the uncoated sample. However, an increase in carbon black content in the organic coating or additional heat treatment at 700 ℃ resulted in a decrease in corrosion resistance. In addition, improvements in corrosion resistance achieved by adding TiO₂ powder to the organic coating were found to be limited. In contrast, dry coating with TiC and CrC exhibited higher corrosion potential, significantly lower current density, and reduced contact resistance compared to the organic coatings. Notably, the TiC-coated sample showed a comparatively lower current density and more stable behavior than the CrC-coated sample. Based on a series of experimental results, a thin TiC coating without defects is proposed as a promising surface treatment strategy for STS bipolar plates in PEMFC.

• Journal of the Korean Society of Visualization
• /
• v.10 no.1
• /
• pp.9-14
• /
• 2012

In this study, a piezoelectric inkjet nozzle with a rectangular shaped channel has been developed, and the characteristics of droplet formation have been investigated according to the variation of pulse widths in bipolar waveform. The channel of the nozzle was fabricated transparently by a precision machining technique. A tantalum membrane which was attached to a piezoelectric material covers the channel. By applying two types of bipolar waveforms to the piezoelectric actuators, droplet formation through the nozzle was monitored by a CCD camera. For the variety of the first and second pulse widths in the bipolar waveforms, the regimes of single and double droplet formations are presented. The change of droplet velocity which depends on the pulse width and the type of waveform is also discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.222-230
• /
• 2013

Retinal bipolar cells according to the light stimulus respond to potential slowly, emit neurotransmitter release(glutamine acid) to depend on membrane potential. In this paper, the several physiological information on neurotransmitter release mechanism in the presynaptic terminal of the ON-type bipolar cells are incorporated into the formula model. The source of fast components and slow components of neurotransmitter release was arranged in parallel, this model was able to reproduce the membrane potential and intracellular $Ca^{2+}$ concentration dependence of neurotransmitter release faithfully. In addition, because the fast releasable components of neurotransmitter was represented by the membrane potential dependence of trapezoid type, whereas the slow releasable components was represented by the membrane potential dependence of a bell type, $Ca^{2+}$ concentration rise in intracellular is suppressed by $Ca^{2+}$ buffer to reduce slow releasable components, it was confirmed that the membrane potential dependence of neurotransmitter release was characteristics of a trapezoid type. And, in the light response of ON type bipolar cell, the result of the simulation of the neurotransmitter release caused by the components of transient and persistent was that the start of light response occurred the fast release of neurotransmitter, it was confirmed that the transient component and persistent component of the light response occurred the slow release. It was confirmed that the later of persistent component of the light response occurred due to the continuous release by synaptic vesicle supplemented from the storage pool.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.4
• /
• pp.169-174
• /
• 2014

The effect of varying amounts of graphite and $TiB_2$ on the electrical conductivity of composite bipolar plates was systematically studied. In this study, Titanium diboride ($TiB_2$) which has a high electrical conductivity, was selected as a filler and a additive material instead of conventional graphite. For proper distribution of the filler and matrix materials, ball milling using alumina balls was conducted for 1h, and then the hot press method was applied for the preparation of composite samples. The results showed a rapid increase in the electrical conductivity of composite bipolar plates at the critical filler content. However, $TiB_2$ and graphite composite bipolar plates showed similar increases in the electrical conductivity even though $TiB_2$ has a higher electrical conductivity than graphite. In addition, it was also found that a small addition of $TiB_2$ to graphite filler could be very effective for increasing the electrical conductivity and flexural strength of the composite bipolar plate.