• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.172-174
• /
• 2006

In this paper, we propose the trajectory generation method for bipedal walking on the stairs. This method is based on multi-masses inverted pendulum mode (MMIPM). MMIPM can effectively reduce the ZMP error but it is only applied to walking on the flat ground. In order to reduce ZMP error when a robot walks on the stairs, we generate the walking motion by MMIPM and modify that motion using parametric functions. We determine the values of the parameters by the simulations. Simulation results show that the robot can walk more stable on the stairs.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.540-546
• /
• 2017

Bipedal robots tend to have greater mobility than conventional treaded or wheeled robots yet they are commonly complicated by instabilities in balance. This paper presents a bipedal robot based upon Jansen's locomotive mechanism which addresses these challenges in stability and efficiency. In order to achieve a functioning robot, we considered a multitude of variables in its motion including, the Ground Score, Drag Score, step size, foot lift, stride, and instantaneous speed of the Jansen mechanism. Matlab and Jansen Opt solver were used to optimize the legs of the robot. A trial and error experimental method was used to determine the best combination of link lengths, and m.Sketch was used to model our results. Finally, we drew the entirety of the robot's figure by using the Edison design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.849-857
• /
• 2015

Although human-sized bipedal humanoid robots have been developed as the ideal form of human-friendly robots, studies of humanoid robots from the user perspective and of actual interaction between humanoid robots and the public in daily environments are few. This paper presents a long-term public demonstration that encouraged interaction between a humanoid robot and unspecified individuals. We have collected a significant amount of subjective evaluation data from the public by performing a storytelling demonstration that enhanced people's empathy towards the robot. The evaluation model consists of the robot's human friendliness, which involves its impression on humans, interaction with humans, and imitation of human motions and the robot's human appearance which involves gender, age, height, and body type. This study shows that there is no significant difference in human-friendliness between gender groups (male and female), while there is a significant difference between age groups (children and adults). In human appearance, it appears that there is no significant difference between either gender groups or age groups, except for the case of the robot's height.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.11
• /
• pp.904-911
• /
• 2001

A broomstick swinging biped acrobatic controller is designed and simulated to show capability of the system of controllers: virtual model controller is employed for the robot\`s posture balancing control while a higher level fuzzy controller modulate the one of the virtual model controller\`s parameter for the pendulum swinging motion generation. The robot is of 7 degree-of-freedom, 8-link planar bipedal robot having two slim legs and a body. Each leg consists of a hip joint, a knee joint, an ankle joint and the body has a free joint at the top in the head at which a freely rotating broomstick is attached. We assume that the goal for the acrobat robot is to maintain a body balance in the sagittal plane while swinging up the freely up the freely rotating pendulum. We also assume that the actuators in the joints are all ideal torque generators. The proposed system of controllers satisfies the goal and the simulation results are presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.397-398
• /
• 2013

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.9
• /
• pp.886-892
• /
• 2008

In this paper, a closed-loop observer to extract the center of mass (CoM) of a bipedal robot is suggested. Comparing with the simple conversion method of just using joint angle measurements, it enables to get more reliable estimates by fusing both joint angle measurements and F/T sensor outputs at ankle joints. First, a nonlinear-type observer is constructed to estimate the flexible rotational motion of the biped in the extended Kalman filter framework. It adopts the flexible inverted pendulum model which is appropriate to address the flexible motion of bipeds, specifically in the single support phase. The predicted estimates of CoM in terms of the flexible motion observer are combined with measurements (that is, output of the CoM conversion equation with joint angles). Then, we have final CoM estimates depending on the weighting values which penalize the flexible motion model and the CoM conversion equation. Simulation results show the effectiveness of the proposed algorithm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.12
• /
• pp.1216-1222
• /
• 2009

This article describes a simple method for generating the walking trajectory for the biped humanoid robot. The method used a simple inverted model instead of complex multi-mass model and a reasonable explanation for the model simplification is included. The problem of gait trajectory generation is to find the solution from the desired ZMP trajectory to CoG trajectory. This article presents the analytic solution for the bipedal gait generation on the bases of ZMP trajectory. The presented ZMP trajectory has Fourier series form, which has finite or infinite summation of sine and cosine functions, and ZMP trajectory can be designed by calculating the coefficients. From the designed ZMP trajectory, this article focuses on how to find the CoG trajectory with analytical way from the simplified inverted pendulum model. Time segmentation based approach is adopted for generating the trajectories. The coefficients of the function should be designed to be continuous between the segments, and the solution is found by calculating the coefficients with this connectivity conditions. This article also has the proof and the condition of solution existence.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.446-457
• /
• 2018

Robot navigation allows robot mobility. Therefore, mobility is an area of robotics that has been actively investigated since robots were first developed. In recent years, interest in personal service robots for homes and public facilities has increased. As a result, robot navigation within the home environment, which is an indoor environment, is being actively investigated. However, the problem with conventional navigation algorithms is that they require a large computation time for their building mapping and path planning processes. This problem makes it difficult to cope with an environment that changes in real-time. Therefore, we propose a humanoid robot navigation algorithm consisting of an image processing and optimization algorithm. This algorithm realizes navigation with less computation time than conventional navigation algorithms using map building and path planning processes, and can cope with an environment that changes in real-time.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.446-454
• /
• 2011

In terms of the anatomy and mechanics of the human foot, a flexible robot foot with toes and heel joints is designed for a bipedal walking robot. We suggest three design considerations in determining foot design parameters which are critical for walking stability. Those include the position of the frontal toe, the stiffness of toes and heels, and the position of the ankle joint. Compared with the conventional foot with flat sale, the proposed foot is advantageous for human-like walking due to the inherent structural flexibility and the reasonable parameter values. Simulation results are provided to determine the design parameters and also show that the proposed foot enables smaller energy consumption.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.344-351
• /
• 2014

In order to accomplish complex navigational commands, humanoid robot should be able to modify its walking period, step length and direction independently. In this paper, a novel walking pattern generation algorithm is proposed to satisfy these requirements. Modification of the walking pattern can be considered as a transition between two periodic walking patterns, which follows each navigational command. By assuming the robot as a linear inverted pendulum, the equations of motion between ZMP(Zero Moment Point) and CM(Center of Mass) state is easily derived and analyzed. After navigational command is translated into the desired CM state, corresponding CM motion is generated to achieve the desired state by using simple ZMP functions. Moreover, when the command is not feasible, feasible command is alternated by using binary search algorithm. Subsequently, corresponding CM motion is generated. The effectiveness of the proposed algorithm is verified by computer simulation.