• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.1-8
• /
• 2021

본 연구에서는 골프 드라이버 스윙 시 운동역학적 변인들이 비거리와 어떠한 관련성이 있는지를 분석하는 것이 목적이었다. 연구대상자는 신체 건강한 15명의 KPGA 골프 선수들이 참여하였다. 8대의 VICON 모션 캡쳐 카메라(250 Hz), 2대의 지면반력기(1000 Hz), 그리고 Trackman을 이용하여 운동학적 및 운동역학적 자료를 수집하였으며, 통계 분석은 Pearson 상관관계를 실시하였다. 드라이버 비거리와 볼 스피드, 클럽 헤드 스피드, 엑스 펙터, 그리고 지면반력 간 유의한 상관관계가 나타났으나, 스매쉬 팩터와 무릎 토크는 비거리와 상관관계가 나타나지 않았다. 볼 스피드, 클럽 헤드 스피드, 엑스 펙터, 지면반력은 비거리에 영향을 미치는 것으로 나타났으나, 스매쉬 팩터와 무릎 토크는 비거리에 영향을 미치지 않는 것으로 나타났다.

• 산업경영시스템학회지
• /
• 제25권1호
• /
• pp.9-13
• /
• 2002

The objective of this study was to analyze and make comparison between the physical responses such as oxygen consumption rate, heart rate, and EMG-measurement for lifting tasks. Lifting activities with three different working frequencies(5, 8, 11 lifts/min) and two different weights(10, 20kg) for a lifting range(from floor to 76cm height) were studied. It was found that theme are positive correlations between the oxygen consumption rate and the EMG-measurements on the region of law back. Even though these physical responses were influenced by work weights and work frequency, it was found that the work frequency plays more important role in making muscle fatigue than the work weight. From these finding it is suggested that the work frequency should be considered as a more influencing factor than the work weight as long as the weight belongs to the permissible range based on the viewpoint of the biomechanical criterion for designing a job of manual materials handling tasks.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.85-90
• /
• 2007

This study shows a way to develop ergonomic design of a plier through quality function deployment (QFD) approach. User needs for pliers, as well as the engineering characteristics which have influence on the ergonomic quality of pliers were determined from the interviews and questionnaires with various user groups. This information was entered in the house of quality, and the results show that the handle is the most important quality factor. A new model was proposed in which ergonomic and gender aspects were considered. QFD is considered a suitable method especially for the manufacturing and/or design fields where biomechanical or physiological background is not present.

• The Journal of Korean Physical Therapy
• /
• 제15권4호
• /
• pp.431-441
• /
• 2003

Pregnancy and puerperium are associated with significant changes in pschological and physiologic health status. Back and pelvic pain is common in pregnancy with prevalence figures in the range of $48\%-90\%$. The pain starts during pregnancy and often disappears soon after childbirth. But the prevalence of such pain four to six months post postpartum is report to be $25-40\%$. In $10-15\%$ of the case the pain become chronics, that is persisting for more than three months after childbirth. Low back pain and pelvic pain maybe caused by several factors related to changes that occur naturally during pregnancy. Changes in the center of gravity can create a strain on weight-bearing structures in bone. Pregnancy related hormones, relaxin, create general laxity of collagenous tissue. Another factor found to be a possible primary or contributing cause for law back and hip symptoms are leg length inequality, weight gain and changes in foot function. This article outlines the physiological and biomechanical changes that occur during pregnancy which have been reported to be possible causes of low back and pelvic pain And then, examination, diagnosis, evaluation and treatment of the woman during pregnancy are described. Standard treatment for low back pain and pelvic pain in pregnancy includes education in anatomy and kinesiology, back-strengthening exercise, training of the abdominal muscles and body posture correction. So, most woman during pregnancy require individual consultation and physiotherapist.

• 한국운동역학회지
• /
• 제20권3호
• /
• pp.319-325
• /
• 2010

The purpose of this research was to investigate the differences in the ski carving turn motion according to level of expertise. The posture and movement of 6 skiers nearby the fall-line was evaluated with a biomechanical approach focusing the rotational mechanics. The slope was at an angle of $9^{\circ}$ and the following variables were measured and calculated: tangential velocity, change of COM height after passing fall-line, width between feet, angle between upper body and thigh, trunk angle, average radius of curvature and average centripetal force. The expert skiers minimized their center of mass height movement and maintained the width of between their feet after the passing the fall-line in comparison with the beginners and intermediate skiers. The experts restrained themselves from pushing their upper body downward after the turn to maximize the centripetal force. The experts in comparison with the beginners and intermediate skiers during the turn didn't have to reduce their radius of curvature to maintain a high centripetal force. It was concluded, that the most important factor affecting the centripetal force, was for the beginners and intermediate skiers, to minimize their movement while using the appropriate amount of edging.

• 한국운동역학회지
• /
• 제28권1호
• /
• pp.61-67
• /
• 2018

Objective: The human body is often modelled as a spring-mass system. Lower extremity stiffness has been considered to be one of key factor in the performance enhancement of running, jumping, and hopping involved sports activities. There are several different classification of lower extremity stiffness consisting of vertical stiffness, leg stiffness, joint stiffness, as well as muscle and tendon stiffness. The primary purpose of this paper was to review the literature and describe different stiffness models and discuss applications of stiffness models while engaging in sports activities. In addition, this paper provided a current update of the lower extremity literature as it investigates the relationships between lower extremity stiffness and both functional performance and injury. Summary: Because various methods for measuring lower extremity stiffness are existing, measurements should always be accompanied by a detailed description including type of stiffness, testing method and calculation method. Moreover, investigator should be cautious when comparing lower extremity stiffness from different methods. Some evidence highlights that optimal degree of lower extremity stiffness is required for successful athletic performance. However, the actual magnitude of stiffness required to optimize performance is relatively unexplored. Direct relationship between lower extremity stiffness and lower extremity injuries has not clearly been established yet. Overall, high stiffness is potentially associate risk factors of lower extremity injuries although some of the evidence is controversial. Prospective injures studies are necessary to confirm this relationship. Moreover, further biomechanical and physiological investigation is needed to identify the optimal regulation of the lower limb stiffness behavior and its impact on athletic performance and lower limb injuries.

• 신경치료
• /
• 제22권3호
• /
• pp.43-48
• /
• 2018

Purpose The purpose of this study is to identify the prevalence, risk factors, characteristics, and interventions of hip joint problems in children with cerebral palsy, and to be able to serve as leverage for early detection, prevention, and function recovery. Method The electronic journal site was searched by the search terms "cerebral palsy", "hip joint", "hip joint dislocation", we analyzed and descript the cited articles from domestic and foreign papers in Pubmed 9, Science Direct 7, and K RISS analysis and analysis. Results Children with cerebral palsy showed the different prevalence according to their disability type, severity, and functional level, and we knew that abnormal neuromuscular control, stiffness, and biomechanical changes could be risk factors. Migration Index, Acetabolum Index, Neck shaft angle using by radiography and passive ROM test, special tests were available for the diagnosis and evaluation of the hip joint. Combination of physical therapy and orthopedic surgery was very important intervention, and complementary alternative therapy, orthosis, and postural assistant are effective. Conclusion We suggested that early detection and prevention is the most important periodic examination and that a multidisciplinary approach is a major factor in intervention.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1070-1073
• /
• 2002

The biomechanical interaction between the stump and the prosthetic socket is critically important to achieve close-to-normal ambulation. Many investigators suggested that the pressure changes during gait of transfemoral amputees are closely related to the prosthetic alignment, the socket shape, the stump size, and the residual muscle activity. The effects of the prosthetic alignment, the socket shape, and the stump size on the interface pressure were investigated previously. However, there is no report how the residual muscle activities in the transfemoral stump affect the socket interface pressure characteristics during gait. Since designs of socket fur lower limb amputees need to consider the socket interface pressure characteristics, the interface pressure patterns by the residual muscle activities during gait should be investigated. In this study, myoelectric signals (MES) and socket interface pressure in residual limb of transfemoral amputees were measured during the stance and swing phases of gait. For the purpose, specially designed quadrilateral sockets that MES electrodes could be instrumented were fabricated. A total of two transfemoral amputees were participated in the experiments. The measured temporal MES amplitude and interface pressure in knee flexor (biceps femoris) and extensor (rectus femoris) had significant correlations (P ＜ 0.05). Based on the test results, It was suggested that the residual muscle activity of transfemoral amputees stump is an important factor affecting socket pressure changes during walk.

• Archives of Pharmacal Research
• /
• 제28권11호
• /
• pp.1311-1316
• /
• 2005

To better define the relationship between dermal regeneration and wound contraction and scar formation, the effects of epidermal growth factor (EGF) loaded in collagen sponge matrix on the fibroblast cell proliferation rate and the dermal mechanical strength were investigated. Collagen sponges with acid-soluble fraction of pig skin were prepared and incorporated with EGF at 0, 4, and 8 $\mu$g/1.7 $cm^{2}$. Dermal fibroblasts were cultured to 80$\%$ confluence using DMEM, treated with the samples submerged, and the cell viability was estimated using MTT assay. A deep, $2^{nd}$ degree- burn of diameter 1 cm was prepared on the rabbit ear and the tested dressings were applied twice during the 15-day, post burn period. The processes of re-epithelialization and dermal regeneration were investigated until the complete wound closure day and histological analysis was performed with H-E staining. EGF increased the fibroblast cell proliferation rate. The histology showed well developed, weave-like collagen bundles and fibroblasts in EGF-treated wounds while open wounds showed irregular collagen bundles and impaired fibroblast growth. The breaking strength (944.1 $\pm$ 35.6 vs. 411.5 $\pm$ 57.0 Fmax, $gmm^{-2}$) and skin resilience (11.3 $\pm$ 1.4 vs. 6.5 $\pm$ 0.6 mJ/$mm^{2}$) were significantly increased with EGF­treated wounds as compared with open wounds, suggesting that EGF enhanced the dermal matrix formation and improved the wound mechanical strength. In conclusion, EGF-improved dermal matrix formation is related with a lower wound contraction rate. The impaired dermal regeneration observed in the open wounds could contribute to the formation of wound contraction and scar tissue development. An extraneous supply of EGF in the collagen dressing on deep, $2^{nd}$ degree-burns enhanced the dermal matrix formation.

• Journal of Microbiology and Biotechnology
• /
• 제33권3호
• /
• pp.339-347
• /
• 2023

Transforming growth factor-β is a key factor in regulating adhesion formation during tendon healing. We investigated the effectiveness of SMAD family members, SMAD7 and SMAD3, in the TGF-β/Smad signaling during flexor tendon repair. Mouse flexor toe deep tendon rupture anastomosis models were made. On days 3, 7, 14, 21, and 28, the expressions of smad7 and smad3 in flexor tendon tissues were detected by RT-qPCR and western blot. Furthermore, postoperative intraperitoneal injections of SMAD7 agonists or SMAD3 antagonists were given. The degree of tendon healing was evaluated by adhesion testing and biomechanical experiments. Hematoxylin and eosin (HE) staining was used to observe the pathological changes. Immunohistochemistry was used to evaluate the expressions of collagen III, SMAD3, and SMAD7. The mRNA levels of matrix metalloproteinases, Mmp2 and Mmp9, and scleraxis (SCX) in flexor tendon tissue were detected by RT-qPCR. Smad3 expression increased and Smad7 expression decreased in flexor tendon tissue after injury. In addition, the SMAD7 agonist blocked SMAD3 phosphorylation. SMAD7 agonist and SMAD3 antagonist both improved adhesion formation during flexor tendon healing, and decreased the expressions of collagen III, Mmp9, and SCX, while increasing Mmp2 expression. This study provides a possible theoretical basis for the SMAD7-SMAD3 signal cascade during flexor tendon adhesion healing.