• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.187-188
• /
• 2006

A 3-D finite element model of human thoracolumbar spine (T12-L2) was reconstructed from CT images. Various anterior and posterior instrumentation techniques were performed with long cage after corpectomy. Six loading cases were applied up to 10 Nm, espectively. The rotations of T12 with respect to L2 were measured and the stiffnesses were calculated as the applied forces divided by the segmental rotations. The posterior fixation technique increased the stiffness of the spine the most. The addition of anterior rod from 1 to 2 increased the stiffness significantly without posterior fixation, but no effect was found with posterior fixation. We found that different fixation techniques changed the stiffness of the spine.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.1
• /
• pp.49-64
• /
• 2005

This study largely compared the general concept, examination, and treatment of various manual therapy techniques. These various manual therapy techniques, however, are still in the developing stage, so no one approach is yet perfect. Clinically, manual therapy techniques are widely being used to treat the dysfunctional neuromusculoskeletal with the common practice of mobilization, manipulation, exercise, and patient education. Anyone of the above approaches must not be selectively chosen as the best method. Manual therapists should treat patients in the clinic with the full knowledge of these proper manual therapy techniques depending on the patient's symptoms in each of the anatomical, biomechanical, and pathological views.

• The Journal of Korean Physical Therapy
• /
• v.8 no.1
• /
• pp.49-64
• /
• 1996

The technology of gait analysis is moving rapidly. Human gait is very complex, and a through understanding of it demands with the basic principles of biomechanics and the technology used to measure gait. Some professionals reluctance to use gait analysis may be due to the amount of time and effort necessary to accomplish this and the necessity for teamwork among the disciplines involved. Any form of observational gait analysis has limited precision and is more descriptive than quantative. The techniques of 3-D kinetic and kinematic analysis can provide a detailed biomechanical description of normal and pathological gait. This article review gait characteristics and procedures that are available for gait analysis. We are certain that, given the steady advance of technology and our continued efforts to document the benefits of that technology. gait analysis will soon be a routine part of the evaluation of both the elite athlete and the physically impaired adult or child.

• Safety and Health at Work
• /
• v.6 no.1
• /
• pp.9-17
• /
• 2015

The human hand is a complex structure that performs various functions for activities of daily living and occupations. This paper presents a literature review on the methodologies used to evaluate hand functions from a biomechanics standpoint, including anthropometry, kinematics, kinetics, and electromyography (EMG). Anthropometry describes the dimensions and measurements of the hand. Kinematics includes hand movements and the range of motion of finger joints. Kinetics includes hand models for tendon and joint force analysis. EMG is used on hand muscles associated with hand functions and with signal-processing technology.

• PNF and Movement
• /
• v.5 no.1
• /
• pp.37-47
• /
• 2007

Objective : A large proportion of stroke survivors have to deal with problems in gait. Proper evaluation of gait must be undertaken to understand the sensorimotor impairment underlying locomotor disorders post stroke. Methods : The characteristics of gait pattern with post stroke are reviewed in this paper. In particular, temporal distance parameters, kimematics, kinetics, as well as energy cost, EMG are focused. Results : The technology for gait analysis is moving rapidly. The techniques of 3D kinematic and kinetic analysis can provide a detailed biomechanical description of normal and pathological gait. This article reviews gait analysis method and characteristics of post stroke. Finally current method of gait analysis can provide further insight to understand paretic gait and therapeutic direction.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.197-204
• /
• 2005

In this study, ground reaction force(GRF), absolute symmetry index(ASI) and coefficient of variation(CV) of fixed, single-axis and multi-axis prosthetic ankle assemblies were investigated to show the biomechanical evaluation for above knee amputees. In the experiments, 37 normal male volunteers, two male and two female AK amputees were tested with fixed, single-axis and multi-axis prosthetic ankle assembly. A gait analysis was carried out to derive the ratio of GRF to weight as the percentage of total stance phase for ten points. The results showed that fixed-axis ankle was superior to the other two ankle assemblies for the characteristic of forwarding and breaking forces. Multi-axis ankle was relatively superior to the other two ankle assemblies for gait balancing and movement of the center for mass. single-axis ankle was relatively superior to the other two ankle assemblies for CV and ASI of GRF.

• Clinics in Shoulder and Elbow
• /
• v.21 no.4
• /
• pp.246-251
• /
• 2018

Compared to single row repair, use of lateral row anchors in suture bridge rotator cuff repair enhances repair strength and increases footprint contact area. If a lateral knotless anchor (push-in design) is inserted into osteoporotic bone, pull-out of the lateral row anchor can developed. However, failures of lateral row anchors have been reported at several months after surgery. In our cases, even though complete cuff healing occurred, delayed pull-out of the lateral row anchor in the suture bridge repair occurred. In comparison to a conventional medial anchor, further biomechanical evaluation of the pull-out force, design, and insertion angle of the lateral anchor is needed in future studies. We report three cases with delayed pull-out of lateral row anchor in suture bridge rotator cuff repair with a literature review.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.79-84
• /
• 2022

Self-powered sensors play an important role in everyday life, and they cover a wide range of topics. These sensors are meant to measure the amount of relevant motion and transform the biomechanical activities into electrical signals using triboelectric nanogenerators (TENGs) since they are sensitive to external stimuli such as pressure, temperature, wetness, and motion. The present advancement of TENGs-based self-powered wearable, implantable, and patchable sensors for healthcare monitoring, human body motion, and medication delivery systems was carefully emphasized in this study. The use of TENG technology to generate electrical energy in real-time using self-powered sensors has been the topic of considerable research among various leading scholars. TENGs have been used in a variety of applications, including biomedical and healthcare physical sensors, wearable devices, biomedical, human-machine interface, chemical and environmental monitoring, smart traffic, smart cities, robotics, and fiber and fabric sensors, among others, as efficient mechanical-to-electric energy conversion technologies. In this evaluation, the progress accomplished by TENG in several areas is extensively reviewed. There will be a discussion on the future of self-powered sensors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.517-518
• /
• 2006

In this study, a commercial fixation device, BioFlex, which was designed with shape memory alloy(SMA) for dynamic stabilization of spine was biomechanically evaluated. The finite element model of intact lumbar spine from L1 to S was developed using CT images. Also, low FE models of 2-level(L4-L5-S) and 3-level(L3-L4-L5-S) posteriori fixation using titanium(Ti) rod and BioFlex(SMA) rod. The rotations of bone segments in the intact model and four models were predicted. Although the rotations of the BioFlex fixation model were smaller than those of the intact model, they were relatively larger than those of Ti fixation. The present can be applied for not only evaluation of the stability of interbody fixator, but also development of new implant.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.520-530
• /
• 2016

This research aims to propose an ergonomic design process for hip protector based on previous studies, existing products, multidisciplinary experts opinion, and wearing test. The elderly are more likely to suffer a hip fracture when they fall due to their physical changes in skeletal form, muscle quantity, bone density, and joint movement. A hip protector is an effective product to prevent hip fractures in the elderly but it also has a problem in that it is uncomfortable. Therefore there is a high chance that it won't be able to prevent hip fractures properly. Since the comfort of a hip protector is one of the most critical elements in preventing a hip fracture, we need to keep improving the hip protector for mobility and usability. Based on the previous studies and limitations of current hip protector products, we need to come up with an optimal design for the Korean elderly. First, knowledge has to be built relating to the ergonomic design of the hip protector considering body shape and size analysis using 3D-scan data, and biomechanical analysis on hip fracture. Second, we need to develop a design process including hip protector pattern design, and wearing evaluation with virtual system. Third, we suggest to reevaluate and verify the design procedure from impact evaluation using testing simulator, virtual evaluation of impact, to wearing comfort and usability evaluation. This design process presented in this study would be expected to contribute to the development of ergonomic hip protector which is suitable for the Korean elderly.