• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.61-64
• /
• 2013

Biomass is well known for organic resources photosynthesized by carbon dioxide water in the air and thus it can be widely used in the form of energy and production for various kinds of materials. Through pyrolysis, biomass can be transformed into solid(biochar), liquid(bio-oil), and combustible gas on the different condition of temperature and heating rate. That's why biomass can be practically used to preprocess and produce a variety of elements. This work is to analyze the characteristics of slow pyrolysis of three different kinds of biomass extracted from Indonesia. They showed similar moisture content and combinations of combustible matters and had quite a large discrepancy in the ash among them like 2.1 & of Bagasse, 91% of PKS, and 20.9% of Paddy Straw, respectively. yield of biochar, solid form of the biomass, steadily decreased when the temperature went up and that of bio-oil the highest at the temperature of 500 degrees Celsius. At the same temperature range, PKS bio-oil showed 51.4 % of yield and Bagasse had 55.1% while it turned out that Paddy straw showed the lowest yield of 37.2%. The apparent density was also measured to figure out the density of each product from the pyrolysis experiments at the temperature of 500 degrees Celsius. The result was like these; the density of biochar was 0.17, the lowest, and that of Tree stem was 1.3 when mixed by an equal amount of biochar and bio-oil.

• 한국분무공학회지
• /
• 제16권3호
• /
• pp.152-158
• /
• 2011

Fast pyrolysis of biomass is one of the most promising technologies for converting biomass to liquid fuels. The pyrolysis oil, also known as the bio crude oil (BCO), have been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of BCO in diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the BCO. One of the easiest way to adopt BCO to diesel engine without modifications is the use of BCO/diesel emulsions. In this study, a diesel engine operated with diesel, bio diesel (BD), and BCO/diesel emulsion was experimentally investigated. Performance and emission characteristics of a diesel engine fuelled by BCO/diesel emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation. Long term validation of adopting BCO in diesel engine is still needed because the oil is acid, with consequent problems of corrosion especially in the injection system.

• 한국물환경학회지
• /
• 제30권5호
• /
• pp.469-476
• /
• 2014

The focus of this study was to observe the growth of Chlorella sp., Nannochloris sp., and Botryococcus braunii under mixotrophic conditions (i.e., added glycerol) with the aim of increasing the growth of biomass and algae oil content. A significant growth of biomass was obtained when grown in glycerol rich environment comparing to autotrophic conditions. 5 g/L glycerol yielded the highest biomass concentration for these strains. Mixotrophic conditions improved both the growth of the microalgae and the accumulation of triacylglycerols (TAGs). The maximum amount of TAG in Botryococcus braunii was reached in the growth medium with 10 g/L glycerol and Chlorella sp., Nannochloris sp. with 2 g/L glycerol. The content of saturated fatty acids of Chlorella sp., Nannochloris sp., and Botryococcus braunii was found to be 34.94, 14.23 and 13.39%, and the amount of unsaturated fatty acids was 65.06, 85.78 and 86.61% of total fatty acids, respectively. The fatty acid profiles of the oil for the culture possibility met the necessary requirements and are, therefore, promising resource for biofuel production.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 고분자리싸이클링 심포지엄
• /
• pp.15-32
• /
• 2006

Biomass had been attracted public attention as eco-friendly resource which not increases the greenhouse gas like carbon dioxide. In this study, it had been collected pyrolytic products such as bio-oil, char and pyrolytic gas from various biomass in a fluidized bed reactor which is one of the fast pyrolysis processes. To understand the characteristics of biomass pyrolysis, the variation of products yield and chemical composition was determined with various operating parameters like temperature, gas velocity($U_{0}/U_{mf}$) and bed height(L/D). In the optimum operating conditions, gas yield and water content was the lowest and concentration of guaiacols and syringols were the highest. The maximum yields of bio-oil was from 55% to 58% at $400^{\circ}C$.

• Journal of Forest and Environmental Science
• /
• 제25권2호
• /
• pp.131-138
• /
• 2009

Recently, various efforts for the extended utilization of woody biomass has been attempted due to the fact that global warming, energy and environmental problems are urgent ones to be solved. Development of new energy sources at our national security level is desperately needed as we depend on almost all of energies supplied from other countries, let alone the economic crisis caused by oil price hike. Woody biomass can be converted to energy by means of thermochemical, biological, or direct combustion processes. Many processes are available for producing bioenergy, such as bioethanol, wood pellet, wood chip, combined heat, and power system. Political support and R&D investment should be provided that can boost the utilization of the wood biomass, the eco-environment, and recyclable and alternative energy resources for national power security. In addition, a long-term strategy that can utilize unused and low efficient woody biomass resources, and systematically collect and manage them in a national level should be set up. Even though the possibility in total exchange of fossil oil with woody biomass is quite low, technology developments of woody biomass for the solution to global warming and environmental problem through its commercialization are expected to grow steadily.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.102-112
• /
• 2012

The vast stores of biomass available in the worldwide have the potential to displace significant amounts of fuels that are currently derived from petroleum sources. Fast pyrolysis of biomass is one of possible paths by which we can convert biomass to higher value products. The wood pyrolysis oil (WPO), also known as the bio crude oil (BCO), have been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of BCO in a diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the BCO. One of the easiest way to adopt BCO to diesel engine without modifications is emulsification of BCO with diesel and bio diesel. In this study, a diesel engine operated with diesel, bio diesel (BD), BCO/diesel, BCO/bio diesel emulsions was experimentally investigated. Performance and gaseous & particle emission characteristics of a diesel engine fuelled by BCO emulsions were examined. Results showed that stable engine operation was possible with emulsions and engine output power was comparable to diesel and bio diesel operation. However, in case of BCO/diesel emulsion operation, THC & CO emissions were increased due to the increased ignition delay and poor spray atomization and NOx & Soot were decreased due to the water and oxygen in the fuel. Long term validation of adopting BCO in diesel engine is still needed because the oil is acid, with consequent problems of corrosion and clogging especially in the injection system.

• 한국수산과학회지
• /
• 제48권6호
• /
• pp.969-976
• /
• 2015

Macroalgal community structure was seasonally examined at Hakampo (Taean) in western coast of Korea from February 2007 to October 2010. Also, the effects of "Hebei Spirit" oil spill on the seaweed community structure were evaluated. A total of 101 macroalgal species were identified, comprising 12 green, 18 brown and 71 red algae. Species richness ranged 58-65 species with maximal in 2008 and minimal in 2009. Seaweed biomass ranged $75.81-102.06g\;dry\;wt./m^2$ (mean, $88.78g/m^2$) with maximal in 2008 and minimal in 2010. Vertical distribution from the high to low intertidal zone was Neorhodomela aculeata and Polyopes affinis; Corallina pilulifera and Chondrus ocellatus; Sargassum thunbergii and Ulva australis. Coarsely-branched seaweeds comprised the highest proportion of biomass ($37.17g/m^2$, or 41.86% of the total biomass) and ecological state group I (ESG I) seaweed biomass was between 81.67-85.44%. Also, ephemeral macroalgae including Ulva species sharply increased in species number and biomass within 1-2 year from the "Hebei Sprit" oil spill in the mid and low intertidal zone. Hakampo rocky shore is still good condition as evaluated based on macroalgal species number, biomass, and composition in functional form and ESG I seaweeds.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.836-847
• /
• 2016

본 연구는 바이오매스를 열분해하여 생성된 수상오일(water soluble oil)을 얻었다. MDO(Marine Diesel Oil)와 수상오일을 유화시켜 생성된 에멀젼 연료의 특성과 배출가스를 연구 하였다. 바이오매스로는 톱밥을 사용하였고 $500^{\circ}C$에서 열분해하여 생성된 물과 탄화수소를 응축시켜서 수상오일을 얻었다. 수상오일을 MDO에 10~20% 까지 혼합 후 유화시켜 에멀젼 연료를 만들었다. 엔진 배출가스 측정은 엔진 dinamometer로 실시하였다. 유화연료는 연소실내에서 미세폭발을 일으켜 연료를 잘게 쪼개어 주어 smoke를 감소시킨다. 그리고 물이 연소실내의 기화열을 빼앗아 연소실 내부의 온도를 낮추어 NOx 생성을 억제하는 효과를 갖는다. ND-13모드의 각 모드별 배출가스온도가 MDO에 비해 유화연료를 사용했을 때 낮게 나온 것으로 뒷받침 될 수 있었다. 유화연료의 함수율이 증가함에 따라 NOx와 smoke의 배출량은 줄어들었으며, 출력도 함수율 증가에 따라 유화연료 자체의 발열량 감소로 인하여 줄어든 것으로 판단된다. ND-13모드에서 MDO 유화연료를 시험한 결과 바이오매스오일 함유량 20%인 유화연료의 NOx 감소량은 약 25%, smoke의 총감소량은 약 60%, 그리고 약 15%의 출력손실을 확인하였다.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.13-20
• /
• 2013

In this study, oil palm biomass such as empty fruit bunch (EFP) and palm kernel shell (PKS) was used as raw materials for making pellets. EFB and PKS are valuable lignocellulosic biomass that can be used for various purposes. If EFB and PKS are used as alternative raw materials for making pellets instead of wood, wood could be saved for making pulps or other value-added products. In order to explore their combustion characteristics, EFB and PKS were analyzed using thermal gravimetric analyzer (TGA) with ultimate and proximate analyses. From the TGA results, thermal decomposition of EFB and PKS occurred in the range of 280 to $400^{\circ}C$ through devolatilization and combustion of fixed carbon. After $400^{\circ}C$, their combustion were stabilized with combustion of residual lignin and char. PKS contained more fixed carbons and less ash contents than EFB, which indicated that PKS could be more active in combustion than EFB.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.42-51
• /
• 2013

In this study, oil palm biomass such as empty fruit bunch (EFB) and palm kernel shell (PKS) was used as raw materials for making pellets. Hardwood sawdusts were also mixed with EFB and PKS for making pellets. For improving a bad forming behavior in a pelletizer, 1 to 3 per cent of corn starch based on oven-dried weight biomass was added. The starch contributed to the decrease of dust generation in addition to the improvement of forming capability during pellet forming. Heating values of every pellets made of EFB and PKS were higher than 4,300 kcal/kg for the first grade pellet, irrespective of addition of sawdusts. However, the pellets made of EFB and PKS had ash contents over 3 per cent, which made it impossible to be applied for home use. Instead, they could be applied for industrial use. For studying their combustion characteristics, the pellets from the mixtures of EFB, PKS and sawdusts were analyzed using thermal gravimetric analyzer (TGA). From the TGA results, thermal decomposition of EFB and PKS occurred following three including endothermic reaction and dehydration, devolatilization of the major chemical components, and finally combustion of residual lignin and char.