• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.216-223
• /
• 2005

In this study, several kinds of volatile amines in ambiant air were collected and their concentrations were expected from the calibration curves prepared by standard solutions of 7 amines by the official measuring method prescribed in Japanese Offensive Odor Law. The obtained calibration curves showed a good linearity and the detection limit of trimethyl amine was found to be about 0.033 ppb (0.040 ng) in case of 50 liters air. It means that trimethyl amine could be detected with the concentration of lower than its permitting level at the border line of companies. As typical examples of measuring amines in air, results of investigation of two sewage works and one rendering plant around the capital area indicated that 4 kinds of amines, i.e. methyl amine, dimethyl amine, trimethyl amine and isopropyl amine were detectable and concentrations of trimethyl amine at the primary sedimentation pond and sludge dewatering building of the sewage plant A showed 9.07 ppb and 7.79 ppb respectively, being over the concentration of odor strength 2.5, And the aeration tank, excrement input facility and indoor of maintenance room of excrement process building in the sewage plant B showed 70.0 ppb of dimethyl amine and 2.44 ppb of trimethyl amine.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.37-38
• /
• 2006

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.382-390
• /
• 2015

Poly(methyl methacrylate) (PMMA) supports and amine additives were investigated to adsorb $CO_2$. PMMA supports were fabricated by using different ratio of pore forming agents (porogen) to control the BET specific surface area, pore volume and distribution. Toluene and xylene are used for porogens. Supported amine sorbents were prepared by wet impregnation of tetraethylenepentamine (TEPA) on PMMA supports. So we could identify the effect of the pore structure of supports and the quantity of impregnated TEPA on the adsorption capacity. The increased amount of toluene as pore foaming agent resulted in the decreased average pore diameter and the increased BET surface area. Polymer supports with huge different pore distribution could be fabricated by controlling the ratio of porogen. After impregnation, the support with micropore structure is supposed the pore blocking and filling effect so that it has low $CO_2$ capacity and kinetics due to the difficulty of diffusing. Macropore structure indicates fast adsorption capacity and low influence of amine loading. In case of support with mesopore, it has high performance of adsorption capacity and kinetics. So high surface area and meso-/macro- pore structure is suitable for $CO_2$ capture.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.438-448
• /
• 2011

Chitosan is widely used in cosmetics and medical fields. Special emphasis has been put on the chemical modification of chitosan to explore its full potential. We have described the synthesis and biological activity of novel peptide amino acid derivatives. The polyamino acid derivatives were synthesized by introducing alkylamine functional group on chitosan at C-6. The poor aqueous solubility of chitosan derivatives hinder both pharmacological studies and pharmaceutical development. To make amino acid coupled chitosan derivatives with improved biological effect and solubility, some attempts have been taken to consist of amino peptide group like aspartic acid and phenylalanine-aspartic acid derivatives onto chitosan C-6. The resultingly substituted chitosan was characterized by solubility in various solvents. We measured chitosan derivatives with $^1H$-NMR and $^{13}C$-NMR. Also, We were investigated on the physical properties and biological activities of these products.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.257-261
• /
• 2007

Tolaasin, a peptide toxin produced by Pseudomonas tolaasii, causes a serious disease on the cultivated mushrooms, known as brown blotch disease. Hemolysis using red blood cells was designed to measure the cytotoxicity of tolaasin molecules. Since tolaasin has two amine groups near the C-terminus, its membrane binding will be dependent on the ionic states of the amine groups. When the tolaasin peptide was titrated, its titration curve indicated the presence of titratable amine(s) at pH ranges from 7.0 to 9.6. When the pH-dependence of tolaasin-induced hemolysis was measured at various pHs, hemolysis was more efficient at alkaline pHs. In order to measure the membrane binding activity of tolaasin at different pHs, RBCs were incubated with tolaasin molecules for short time periods and washed out with fresh buffer. Because of the tolaasin binding during the preincubation period, fast hemolyses were observed at pH 8 or higher. These results imply that non-charged or less positively charged states of tolaasin molecules easily bind to membrane and show high hemolytic activity.

• Food preservation and processing industry
• /
• v.11 no.1
• /
• pp.30-37
• /
• 2012

• Carbon letters
• /
• v.21
• /
• pp.1-7
• /
• 2017

The effects of ammonia-treated graphene oxide (GO) on composites based on epoxy resin were investigated. Ammonia solutions of different concentrations (14-28%) were used to modify GO. Nitrogen functional groups were introduced on the GO surfaces without significant structural changes. The ammonia-treated GO-based epoxy composites exhibited interesting changes in their mechanical properties related to the presence of nitrogen functional groups, particularly amine ($C-NH_2$) groups on the GO surfaces. The highest tensile and impact strength values were 42.1 MPa and 12.3 J/m, respectively, which were observed in an epoxy composite prepared with GO treated with a 28% ammonia solution. This improved tensile strength was 2.2 and 1.3 times higher than those of the neat epoxy and the non-treated GO-based epoxy composite, respectively. The amine groups on the GO ensure its participation in the cross-linking reaction of the epoxy resin under amine curing agent condition and enhance its interfacial bonding with the epoxy resin.

• Journal of Food Hygiene and Safety
• /
• v.29 no.1
• /
• pp.40-46
• /
• 2014

We have screened Bacillus strains suitable for the fermentation of soybean products with respect to the control of Bacillus cereus and the reduction of biogenic amines. Of 26 isolates, a strain named as the SCK A08 carried antimicrobial activity against B. cereus and Staphylococcus aureus, major food poisoning species in soybean products. PCR analysis revealed that the SCK A08 strain did not contain genes for Bacillus cereus toxins including nonhemolytic enterotoxin, hemolytic enterotoxin, cytotoxin K, cereulide and certrax. The SCK A08 strain could degrade histamine, tyramine, putrescine, and cadaverine by 67.41%, 76.59%, 57.32%, and 50.69%, respectively, during fermentation in cooked soybeans containing 0.5% (w/w) of each biogenic amine. The morphological and biochemical properties and phylogenetic relationships based on 16S rRNA gene sequences indicated that the isolate was most closely related to Bacillus licheniformis. Use of the strain SCK A08 would be a potential measure to overcome two hygienic problems that were frequently faced during manufacture of traditionally fermented soybean products.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.885-889
• /
• 2012

In this study, amine and metal oxide additives were investigated to improve $CO_2$ adsorption capacity of activated carbons (ACs). The characteristics of surface modified ACs were studied by X-ray photoelectron spectroscopy (XPS), $N_2$ adsorption, X-ray diffraction (XRD), and BET. Amine surface treatment decreased specific surface area and pore volume of ACs, but increased alkalinity by the incorporated nitrogen functional groups. Adsorption capacities of amine functionalized ACs was larger than original ACs, because basic group which can react with $CO_2$ was grafted on the ACs surface. Presence of copper oxides on ACs also enhances the carbon dioxide adsorption. The copper oxides could increase the adsorption rate of carbon dioxides due to the acid-base interaction (or electron acceptor-donor interaction). It was found that copper oxide loading was a promising method to improve the $CO_2$ adsorption capacity of ACs.

• Korean Journal of Microbiology
• /
• v.48 no.2
• /
• pp.163-170
• /
• 2012

In order to inhibit the growth of pathogens and degrade biogenic amines during the fermentation of soybean products, an isolate with antimicrobial activity against pathogens and biogenic amine-degrading property was obtained from 83 traditionally fermented soybean products. The morphological and biochemical tests and the phylogenetic relationship among 16S rRNA gene sequences indicated that the isolate named as the strain SCK B11 was most closely related to Bacillus licheniformis. The cell-free supernatant of two day cultures was active against several pathogens including Enterococcus faecalis, Listeria monocytosis, Micrococcus luteus, Pseudomonas aeruginosa, Bacillus cereus, and Staphylococcus aureus. PCR analysis was conducted to determine relatedness to antimicrobial lantibiotics and biosurfactants produced by Bacillus spp., but showed negative for the genes encoding surfactin, lichenysin, and lichenicidine. Electron microscopic observation indicated that the antimicrobial agent seemed to attack the membrane of the pathogens, leaving the ghost or shrunken cells. The strain was found to degrade histamine by 72% and tyramine by 66% in the cooked soybean containing 5.3% of biogenic amine over 10 days of fermentation time. The use of selected strain would be a potential control measure in manufacturing traditionally fermented soybean products that are difficult to control pathogens and biogenic amine levels.