• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.113-114
• /
• 2016

In this study, various fats and oils were soaked in low-strength mortar to experiment what kind of fats and oils had the worst effect on low-strength mortar; it went as follows. For rate of change in length of fat and oil soaking, there was an increase in the order of pig fat, bio-diesel, grape seed oil, and water; in the case of olive oil it was destroyed within 56 days. For rate of change in mass, there was an increase in the order of bio-diesel, water, pig fat, grape seed oil, and olive oil. For relative motion elastic coefficient, there was a decrease in the order of olive oil, grape seed oil, and water. On the whole, pig fat, bio-diesel, and olive oil were shown to have the worst effect on low-strength mortar.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.67-74
• /
• 2012

Bio-char, obtained from biomass as a by-product of the pyrolysis process, is used successfully as a soil amendment and carbon sequester in this limited study. Recent and active research from literatures has extended the application of bio-char in the industry to promote sustainability and help mitigate the negative environmental impacts caused by carbon emissions. This study aims to investigate the feasibility of high-carbon bio-char as a carbon sequester and/or admixture in mortar and concrete to improve the sustainability of concrete. This paper presents the experimental results of an initial attempt to develop a cement admixture using bio-char. In particular, the effects of the water retention capacity of bio-char in concrete are investigated. The chemical and mechanical properties (e.g., the chemical components, microstructure, concrete weight loss, compressive strength and mortar flow) are examined using sample mortar mixes with varying replacement rates of cement that contains hardwood bio-char. The experimental results also are compared with mortar mixes that contain fly ash as the cement substitute.

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.291-296
• /
• 2018

The aim of this work is to study the effect of aggregate type on the physico-mechanical properties and microstructure of bio-mortar (BM). Three different aggregates such as sand, dolomite and basalt were used. BM was prepared by mixing aggregates with bacterial cells (Sporosarcina Pasteurii) and one equimolar (1 M) of $urea/CaCl_2.2H_2O$. The results proved that the chemical composition and physical properties of aggregates play an important role in the microbial precipitation rate as well as size, morphology and crystallinity of the precipitated calcite, which strongly reflects on the properties of the prepared BM. The BM containing dolomite gave the highest compressive strength and lowest water absorption.

• Ecology and Resilient Infrastructure
• /
• v.5 no.2
• /
• pp.82-87
• /
• 2018

Proliferation of algae on the surface of concrete or mortar in aquatic habitat has a negative impact on maintenance of concrete-based structures. Growth of algae may decrease stability of structure by bio-deterioration. In this study, we developed a functional mortar for restraining bio-deterioration by using $Cu^{2+}$ ion. The mortar contains soluble glass beads made of $Cu^{2+}$ ion, which can dissolve into water slowly. Mortars prepared with different ratio of glass beads (0, 2, 5, 10, and 15%) were placed in a culture medium with algae and incubated over a month period. Water chemistry, chlorophyll-a, and extracellular enzyme activities were measured. The incubation was conducted in both freshwater and seawater conditions, to assess applicability to both aquatic conditions. Overall, mortar with Cu glass exhibited lower chlorophyll-a content, suggesting that the functional mortar reduced algal growth. DOC concentration increased because debris of dead algae increased. Cu glass also decreased phosphatase activity, which is involved in the regeneration of inorganic P from organic moieties. Since, P is often a limiting nutrient for algal production, algal growth may be inhibited. Activities of ${\beta}$-glucosidase and N-acetylglucosaminidase were not significantly affected because carbon and nitrogen mineralization may not be influenced by the Cu glass beads. Our study suggests that functional mortar with Cu glass beads may reduce the growth of algae on the surface, while it has little environmental impact.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.97-104
• /
• 2018

In recent years, more than 5,000 tons of sargassum honeri have been infested in the southern coast and the coast of Jeju Island, causing serious damage to the farms and fisheries, and environmental problems. The alginate contained in the sargassum honeri is a natural polymeric substance mainly used for medicines and foods. However, since there is no way to utilize it in large quantities, a study was carried out to utilize bio polymer obtained from sargassum honeri in producing polymer mortar for repairing deteriorated infrastructures. From the tests of setting time, it was found that the L0BP12 mixture containing 12% of bio polymer increased the setting time by 20% as compared with the L12BP0 mixture using only synthetic polymer. From the tests of water absorbtion, the LOBP12 combination decreased by 0.36% compared to Plain-URHC using ultra rapid hardening cement. This indicated that the watertightness of the mortar was increased by the incorporation of the bio polymer. In the compressive and flexural strength tests, the strength decreased as the amount of bio polymer increased. The incorporation rate of the maximum bio polymer satisfying the KS F 4042 standard was determined to be 12%. In addition, the bond strength of the mortar produced with biopolymer was higher than that of Plain-URHC specimens, and it was confirmed that incorporation of bio polymer improves bond strength of mortar.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.20-28
• /
• 2017

The direct tensile strength of the mortar specimen containing pitch-based carbon fiber was ranged between 1/27~1/22 as compared to the average compressive strength of mortar. It was found that the direct tensile strength of the mortar containing the same amount of PAN-based carbon fiber was around 1/15. While the case of the control specimen without the carbon fiber was around 1/29. One the other hands, the flexural tensile strength of the mortar containing pitch-based carbon fibers was about 1/12 as compared to the average compressive strength. In case of the mortar specimen with PAN-based carbon fiber and control mortar were 1/10 and 1/13.5, respectively. The tensile performance of the mortar with pitch-based carbon fiber was found to be intermediate between control mortar and the reinforced mortar incorporated with the PAN-based carbon fiber.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.4
• /
• pp.51-60
• /
• 2017

Bottom ash(BA) from coal-fired power plants is burnt and remaining ash at high temperature. Since the BA is baked at high temperature, it is considered to be the same function as the elvan. Nowadays, the demand for mortar with far infrared rays, antibacteria, antifungus, deodorization, aridity and humidity function is increasing as the materials such as Hwangtoh(yellow soil) and elvan rather than general mortar. As a result of comparing the functionality of eco-friendly bio BA mortar with that of general mortar, the far infrared ray emissivity is about $0.02{\times}10^2W/m^2$ more and the deodorization function is about 26% or more. Even in the case of humidity control, BA motors showed about 1.8 times higher than general mortar, and more than 10% higher than the "good" standards of moisture absorption and damp proofing construction materials established by the Ministry of Land, Transport and Maritime Affairs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.77-78
• /
• 2023

This paper experimentally examined the recycling of combustion by-products emitted from a combined heat and power plant using lignocellulosic biomass fuel. Physical and chemical analyzes were performed on Bio-SRF and three types of wood pellet combustion by-product samples (fly-ash, FA). As a result of the experiment, the compressive strength of mortar substituted with 5, 10, and 20% of FA compared to the cement weight was found to be excellent, and its recyclability was confirmed as a substitute for existing admixtures.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.663-671
• /
• 2023

This research experimentally evaluated the recyclability of four varieties of lignocellulosic fly ash(FA), a by-product from three power plants employing lignocellulosic biomass(Bio-SRF, wood pellets) as a fuel source. Comprehensive analyses were conducted on FA, encompassing both physical parameters (particle shape, size distribution, fineness, and density) and chemical properties(chemical composition and heavy metal content). Mortar test specimens, with FA mixing ratios ranging from 5 to 20%, were produced in compliance with KS L 5405 standards, and their flow and compressive strength were subsequently measured. The test results indicated that the four types of FA exhibited particle sizes approximately between 20~30㎛, densities around 2.3~2.5g/cm³, and a fineness range of 2,600~4,900cm²/g. The FA comprised approximately 50~90% of components such as SiO₂, Al₂O₃, Fe₂O₃, and CaO, displaying characteristics akin to type-II and type-III FA of KS L 5405 standards, albeit with differences in chlorine and SiO₂ content. From the mortar tests, it was observed that the compressive strength of the mortar ranged between 34~47MPa when the pellet combustion FA was mixed in proportions of 5~20%. FA, produced exclusively from the combustion of 100% lignocellulosic fuel, is assessed to possess high recyclability potential as a substitute for conventional admixtures.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.793-800
• /
• 2006

This paper reports test results to assess the influence of superplasticizers and different admixture on the flow and compressive strength development of cementless mortar using developed hwangtoh binder. Test specimens were classified into four groups: series for I the mixing ratio of superplasticizers, series II for a kind and replacement level of admixtures according to the variation of water/hwangtoh binder ratio, series III for the specific surface area and replacement level of ground granulated blast-furnace slag and series IV for the replacement level of powered superplasticizer agent developed to improve slump loss of concrete. The proper replacement level of each admixture is proposed for enhancement the flow and compressive strength of the hwangtoh binder mortar.