• Journal of Biomedical Engineering Research
• /
• v.29 no.3
• /
• pp.173-178
• /
• 2008

Recent advancements in the electrospinning method enable the production of ultrafine solid and continuous fibers with diameters ranging from a few nanometers to a few hundred nanometers with controlled surface and morphological features. A wide range of biopolymers can be electrospun into mats with a specific fiber arrangement and structural integrity. These features of nanofiber mats are morphologically similar to the extracellular matrix of natural tissues, which are characterized by a wide pore diameter distribution, a high porosity, effective mechanical properties, and specific biochemical properties. This has resulted in various kinds of applications for polymer nanofibers in the field of biomedicine and biotechnology. The current emphasis of research is on exploiting these properties and focusing on determining the appropriate conditions for electrospinning various biopolymers for biomedical applications, including scaffolds used in tissue engineering, wound dressing, drug delivery, artificial organs, and vascular grafts, and for protective shields in specialty fabrics. This paper reviews the research on biomedical applications of electrospun nanofibers.

• Journal of Genetic Medicine
• /
• v.16 no.1
• /
• pp.23-26
• /
• 2019

Thrombophilia refers to inherited or acquired hemostatic disorders that result in a predisposition to blood clot formation. When combined with the hypercoagulable state that is characteristic of pregnancy, there is an increased risk of severe and recurrent pregnancy complications. Activated protein C resistance caused by factor V Leiden (FVL) mutation is known to be the most common cause of inherited thrombophilia in Caucasian population. FVL mutation has been related to pregnancy complications associated with hypercoagulation, e.g. miscarriage, intrauterine fetal demise, placental abruption, and intrauterine growth retardation. Although the FVL mutation is easily detected using molecular DNA techniques, patients who are heterozygous for this disorder often remain asymptomatic until they develop a concurrent prothrombotic condition. Because there are potentially serious effects of FVL mutation for pregnancy, and because effective treatment strategies exist, early detection and treatment of this condition might be considered.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.1925-1926
• /
• 2009

• Polymer Science and Technology
• /
• v.23 no.3
• /
• pp.260-272
• /
• 2012

• Archives of Plastic Surgery
• /
• v.42 no.3
• /
• pp.267-277
• /
• 2015

Three-dimensional (3D) printing has been particularly widely adopted in medical fields. Application of the 3D printing technique has even been extended to bio-cell printing for 3D tissue/organ development, the creation of scaffolds for tissue engineering, and actual clinical application for various medical parts. Of various medical fields, craniofacial plastic surgery is one of areas that pioneered the use of the 3D printing concept. Rapid prototype technology was introduced in the 1990s to medicine via computer-aided design, computer-aided manufacturing. To investigate the current status of 3D printing technology and its clinical application, a systematic review of the literature was conducted. In addition, the benefits and possibilities of the clinical application of 3D printing in craniofacial surgery are reviewed, based on personal experiences with more than 500 craniofacial cases conducted using 3D printing tactile prototype models.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.79-86
• /
• 2017

In this paper, we implement a common module that can integrate multiple biometric information for integrated patient monitoring system. Conventional biomedical instruments have many devices attached to each patient, making it difficult to monitor abnormality signs of many patients in real time. In this paper, we propose a module for an integrated monitoring system that can perform centralized monitoring using a common module that integrates multiple measurement devices. A protocol for sending and receiving packets between the measuring device and the common module is designed, and the packets transmitted through the network are stored and managed through the integrated monitoring system and provide information to various users such as medical staff. The results of this study are expected to contribute to the management of patients and efficient medical services in hospitals.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.148.1-148.1
• /
• 2003

The effects of methanolic extracts of Polygalae Radix (PR 100mg/kg) was tested to evaluate on the neuroprotective activity (92％ p<0.001) on global cerebral schemia. Based on bioassays guided fractionation, butanol soluble fraction (BtOH 25mg/kg) had the neuroprotive effect (87％ p<0.001) of global cerebral ischemia in rat. Oxygen free radical injury plays an important role in neuronal damage induced by brain ischemia and reperfusion. (omitted)

• Journal of Korean Medical classics
• /
• v.28 no.2
• /
• pp.1-16
• /
• 2015

Objectives : Nomenclature for medical terminology is the most important point in traditional medical standardization. For example, standard Romanized nomenclature for acupuncture points, herbal medicines, prescriptions and classic books have been achieaved. However, studies on standard Romanized nomenclature for persons who was involved in traditional medicine are rare. Methods : Following up all articles in Journal of Korean Medical Classics[J. KMC], which have Romanized name for persons and analyzing problems of those. Results : There were several methods to write in Romanized character even to an unique and replaceable name. Conclusions : Romanized nomenclature for persons' name who were involved in traditional medicine as a terminology must have unique expression. So we suggest that authors to write articles have to use unique Romanized nomenclature for persons who were involved in traditional medicine and persons had lived in a certain country should be written in Romanized characters with their own languages.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.1
• /
• pp.93-108
• /
• 2016

One of the fields to which the 3D printing technology can be applied is the field of medicine. Recently, the application of 3D printing technology to the bio-medical field has been gradually increasing with the commercializing of the bio-compatible or bio-degradable materials. The technology is currently contributing to the biomedical field by reducing times required for operations or minimizing adverse effects through preoperative identification of post-surgical consequences or model surgery with artificial bones and organs. This technology also enables the production of customized biomedical auxiliary products like hearing aids or artificial legs etc. For the field of dentistry, the 3D printing technology is also expected to elevate the level of dental treatment by making the customized orthodontic models, crown, bridge, inlay, and surgical guides for implant and surgery. However, issues remaining unidentified or incomplete in printing materials, modeling technology, software technology associated with CAD, verification of bio-stability and bio-effectiveness of materials or in compatibility and standardization of the technology are yet to be solved or be clarified for the full-scale application of the 3D printing technology, thus, it seems such issues should be resolved through further studies.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.5
• /
• pp.401-409
• /
• 2006

Infections of the oral and maxillofacial region are one of the most common conditions for which a patient presents to a maxillofacial surgeons. Although these infections can arise from a variety of source, dental disease is the most common etiology. So, odontogenic infection are frequently encountered in the practice of oral and maxillofacial surgery. These infections often respond to antimicrobial chemotherapy or surgical intervention, such as extraction of teeth, incision and drainage through clinical features. But, odontogenic infections have the potential to spread via the fascial spaces in the head and neck region, and, they spread to cavernous sinus, deep musculofascial space and other vital structure. We have undertaken clinical studies on infections in the oral and maxillofacial regions by analyzing retrospectively hospitalized patients in the Dept. of Oral and Maxillofacial Surgery, Chonbuk National University Hospital past 5 years from 2000 to 2004. And, the patients' age, sex, medical history, causes of the infection, surgical intervention, and other clinical parameters were reviewed. The obtained results were as follows : 1. The most frequent cause of oral and maxillofacial infection was odontogenic. And in the odontogenic cause, dental caries was the most common cause (47.2%). 2. The most common fascial space involved was the submandibular space (15.7%), followed by the buccal space (14.8%). 3. 60.4% of all patients required surgical drainage of the abscess, endodontic treatment or tooth extraction or periodontal treatment with drainage. 4. The most causative organism isolated from the pus culture were streptococcus viridans (53.9%). 5. Underlying medical problems were found in 136 patients (41.9%), the most common being hypertension (27.9%) and diabetes (14.7%).