• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.257-265
• /
• 2020

Densities (ρ) for binary mixtures of ethanol (1) + diisopropyl ether (DIPE) or cyclohexane or alkane (C₆-C₉) (2) were measured at 298.15 K, 308.15 K and 318.15 K. The excess molar volume (V^E_m) of binary mixtures was calculated using ρ data and correlated with Redlich-Kister polynomial equation. The V^E_m values for binary mixtures of ethanol (1) + cyclohexane or n-alkane (C₆-C₉) (2) were positive, whereas for ethanol (1) + DIPE (2) these were negative. The magnitude of V^E_m values follows the order: cyclohexane > n-nonane > n-octane > n-heptane > n-hexane > DIPE. The V^E_m values have been interpreted qualitatively and also quantitatively in terms of Flory-Treszczanowicz-Benson (FTB) model and Prigogine-Flory-Patterson (PFP) theory. The values V^E_m predicted using FTB model agree well with experimental V^E_m values at all mole fractions. But the PFP theory describes well V^E_m data in ethanol-rich region (x₁ > 0.5) for all binary mixtures and is able to predict the sign of V^E_m vs x₁ curve for ethanol-lean region (x₁ < 0.5) except for ethanol (1) + nonane (2) mixtures.

• 대한화학회지
• /
• 제56권5호
• /
• pp.548-555
• /
• 2012

Ultrasonic velocity and density measurements have been undertaken for a number of binary liquid mixtures involving different commercial solvent extractants, LIX reagents. The binary mixtures under investigation have been classified under two categories such as polar-polar, and polar-non-polar types. Different theories and relations such as Schaaff's Collision Factor Theory (CFT), Nomoto's relation (NOM), and Van Dael & Vangeel ideal mixing relation (IMR) have been used to evaluate the velocity theoretically for all these binary systems. The relative merits of afore-mentioned theories and relations compared to experimental values of velocity have been discussed in terms of percentage variations. However, the CFT and Nomoto's relation show better agreement with the experimental findings than the ideal mixing relation for all the systems under investigation.

• Journal of Pharmaceutical Investigation
• /
• 제38권1호
• /
• pp.1-8
• /
• 2008

Planetary ball mill was used to decrease and control the particle size of excipients. The effects of the weight of sample and the revolution number of mill, and grinding time on the particle size of the ground sample were analyzed by response surface methodology. The optimum conditions for the milling of microcrystalline cellulose were 38.82 g of the weight of sample and 259 rpm of the revolution number of mill, and 45 minutes of grinding time. The predicted value of the particle size at the these conditions was $19.02{\mu}m$, of which the experimental value at the similar conditions was $18.68{\mu}m$. The tensile strength of tablets of single-component powders, such as microcrystalline cellulose, hydroxypropylmethyl cellulose and starch, binary mixtures and ground binary mixtures of these powder were measured at various relative densities. It was found that the logarithm of the tensile strength of the tablets was proportional to the relative density. A simple model, based upon Ryshkewitch-Duckworth equation that was originally proposed for porous materials, has been developed in order to predict the relationship between the tensile strength and relative density of ground binary tablets based on the properties of the constituent single-component powders. The validity of the model has been verified with experimental results for ground binary mixtures. It has demonstrated that this model can well predict the tensile strength of ground binary mixtures based upon the properties of single-component powders, such as true density, and the compositions. When the tensile strength of the mixture of microcrystalline cellulose hydroxypropylmethyl cellulose (90:10) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 45.3 to 5.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$. When the tensile strength of the mixture of microcrystalline cellulose starch (80:20) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 31.0 to 11.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1452-1458
• /
• 2009

The change in the electronic absorption and emission energy of 7-aminocoumarin derivatives in binary solvent mixtures has been studied. The electronic transition energy along with the Stokes' shift is correlated with the orientation polarizability of the solvent as well as the empirical solvent polarity parameters $E_T$ (30). It is observed that the emission peak shift traces the change of $E_T$ (30) value very closely in binary solvent mixtures. The emission transition more strongly depends on the solvent polarity than the absorption, which indicates the dipole moment gets larger on excitation. From the dependence of the Stokes’ shift of 7-aminocoumarins with the solvent polarity parameters and the ground state dipole moment obtained by the semi-empirical calculations, the excited state dipole moment was estimated. The fluorescence lifetime change of 7-aminocoumarins in binary solvent mixtures was measured and the results are explained in terms of molecular conformation and solvent polarity. The study indicates the empirical solvent polarity $E_T$ (30) is a good measure of microscopic solvent polarity and it probes in general the non-specific solvent interactions.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.942-951
• /
• 2004

This paper presents the results of a theoretical study of the effect of radiation during free convective laminar film boiling for methanol/water binary mixtures on an isothermal vertical wall at atmospheric pressure. With the well-known boundary layer theory as a basis, a theoretical model has been formulated into consideration for mass diffusion at liquid phase. The equations are numerically solved by a similarity method to investigate the effects of radiation emissivity on the surface with various parameters such as wall superheat and composition of more volatile component at liquid phase far from the wall. From the results, the distributions of the physical quantifies are investigated in both phases. New correlations are proposed to predict the heat transfer coefficient of binary mixtures. It is shown that the proposed correlations are in good agreement with numerical results and with Bromley's correlation within maximum $11\%$ errors. It is also found that as the wall superheat is increased, radiation effect becomes more important.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.935-944
• /
• 2003

Forced convective boiling heat transfer coefficients were predicted for an annular flow inside a horizontal tube for pure refrigerants and nonazeotropic binary refrigerant mixtures. The heat transfer coefficients were calculated based on the turbulent temperature profile in liquid film and vapor core considering the composition difference in vapor and liquid phases, and the nonlinearity in mixing rules for the calculation of mixture properties. The heat transfer coefficients of pure refrigerants were estimated within a standard deviation of 14% compared with available experimental data. For nonazeotropic binary refrigerant mixtures, prediction of the heat transfer coefficients was made with a standard deviation of 18%. The heat transfer coefficients of refrigerant mixtures were lower than linearly interpolated values calculated from the heat transfer coefficients of pure refrigerants. This degradation was represented by several factors such as the difference between the liquid and the overall compositions, the conductivity ratio and the viscosity ratio of both components in refrigerant mixtures. The temperature change due to the concentration gradient was a major factor for the heat transfer degradation and the mass flux itself at the interface had a minor effect.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.149-156
• /
• 2018

This paper investigated the influence of binary and ternary blends of mineral admixtures in self-compacted mortar (SCM) on the fresh, mechanical and durability properties. For this purpose, 25 mortar mixtures were prepared having a total binder content of $640kg/cm^3$ and water/binder ratio between 0.41 and 0.50. All the mixtures consisted of Portland cement (PC), fly ash (FA) and silica fume (SF) as binary and ternary blends and air-entrained admixture wasn't used while control mixture contained only PC. The compressive and tensile strength tests were conducted for 28 and 91 days as well as slump-flow and V-funnel time tests whilst freeze-thaw (F-T) resistance and capillary water absorption tests were made for 91-day. Finally, in general, the use of SF with FA as ternary blends improved the tensile strength of mortars at 28- and 91-day while the use of SF15 with FA increased the compressive strength of the mortars compared to binary blends of FA. SCM mixtures with ternary blends had lower the sorptivity values than that of the mortars with binary blends of FA and the control mixture due to the beneficial properties of SF while the use of FA with SF as ternary blends induced the F-T resistance enhancement.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1337-1348
• /
• 1990

본 연구에서는 Peng-Robinson 상태 방정식을 기본으로 하여 먼저 단일 성분의 냉매에 대한 열역학적 물성치를 구한 뒤 그 정확도를 검증하고, 동일한 형태의 상태식 과 적절한 혼합 법칙을 통해 혼합냉매의 기액 평형 상태와 냉동 및 열펌프 사이클 해 석에 필요한 엔탈피와 엔트로피 등의 열역학적 물성치를 추산하고자 한다.단일 성 분의 냉매로서는 R13B1, R22, R12, R152a, R114를 택하였고, 혼합냉매로서는 앞의 단 일성분 냉매를 혼합한 것 중에서 그 기초적인 실험 자료가 아미 알려진 R13B1/R114, R22/R114, R12/R114 R152a/R114, R13B1/R152a 및 R13B1/R12를 택하였다. 이는 추후 상이한 냉매를 단일식으로 나타낼 수 있는 대응상태의 원리를 사용한 열물성 계산의 기반이 될 수 있을 것이다.

• Preventive Nutrition and Food Science
• /
• 제2권4호
• /
• pp.291-295
• /
• 1997

Some sensory properties of synthetic sweeteners are limiting factors for use in low calorie foods of soft drinks. By combining synthetic sweeteners(Neohesperidin dihydrochacone(NHDC), stevioside) with sucrose, sorbitol or xylitol, these limitations can be overcome. Using trained taste panelists and magnitude estimation methods, synergistic effects were investigated in binary sweetener mixtures, The results showed that synergism, as much as 28% to 69%,was noted at all concentration in xylitol-stevioside, NHDC-stevioside mixtures. Synergistic effects were found only at high concentration levels in mixtures of sucrose-NHDC, sucrose-stevioside, and sorbitol-stevioside, ranging from 11% to 22%.By taking advantage of synergistic effects, ginseng tea and orange flavored beverages, sweetened with either xylitol-stevioside of NHDC-stevioside, were prepared and the sensory quality was compared with that of sucrose containing beverages. It was found that sensory characteristics were judged to be very similar for all formulations. The result suggests the possibility of using of using these sweetener mixtures as sugar substitutes in ginseng tea and orange drink.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2304-2308
• /
• 2003

Ocean thermal energy conversion (OTEC) is an effective method of power generation, which has a small impact on the environment and can be utilized semi-permanently. This paper describes a dynamic model for a pilot OTEC plant built by the Institute of Ocean Energy, Saga University, Japan. This plant is based on Uehara cycle, in which binary mixtures of ammonia and water is used as the working fluid. Some simulation results attained by this model and the analysis of the results are presented. The developed computer simulation can be used to actual practice effectively, such as stable control in a steady operation, optimal determination of the plant specifications for a higher thermal efficiency and evaluation of the economic prospects and off-line training for the operators of OTEC plant.