• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.127-130
• /
• 1998

3차원의 영상을 2차원 화면에 투영시키기 위해서는 영상에 대한 카메라의 촬영 각도와 촬영 거리를 일치시켜주어야 한다. 이를 위해서 다른 각도와 거리에서 촬영한 영상을 같은 각도와 거리에서 촬영한 영상으로 만들어 주는 변환을 만들었다. 그러나 이러한 변환을 하였을 때 디지털 영상은 경계부분이나 직선 등이 끊어지는 현상이 발생하게 된다. 본 논문에서는 변환된 영역에서의 정수 점에 원래 영상의 점을 바로 대응시키지 않고 주변 점의 다항식으로 나타낼 수 있다. 이 다항식의 계수를 정하는 방법으로 변환된 영역에서의 정수 점에 대응하는 원래 영상의 점을 구하여 2차 선형 보간법(Bilinear interpolation)을 사용하였다. 변환된 영역에서의 정수 점에 대응하는 원래 영상에서의 좌표를 얻기 위해 주변 4개의 점 내에서는 부분적으로 선형적임을 가정하였다. 위의 방법으로 주변 점들의 에너지를 각 정수 점들로 분산시킴으로써 경계 점이나 직선들이 잘 보존된 상태로 변환할 수 있었다.

• Journal of Biomedical Engineering Research
• /
• v.11 no.1
• /
• pp.31-38
• /
• 1990

Image correction of the fluorescein angiogram with the low contrast and geometrically distorted is studied. The procedure is divided into two steps : A template matching step and a geometrical transformation step. Based on the sequential similiarity detection algorithm, more Improved matching results are obtained with edge enhanced image. For the reference points and the corresponding matchimg points, the geometrical transformationss by the use of the average value of the X, Y translational shifts and a pair of these points, respectively are described. Then the corrected images are obtained using bilinear interpolation. It is proven that the usefullness of this study for the image correction of the ocular fundus fluoresceln angiogram with low contrast and geometrically distorted mainly due to the eye movements.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.94-97
• /
• 2008

In this paper, A Digital Voltage Mode Controller is designed for the Photovoltaic power converter applications. The designed Digital Voltage Mode Controller is derived analytically from the continuous time small signal model of the boost converter. Due to the small signal model based derivations of the control law, the designed control method can be applicable to K-factor Approach method and bilinear transformation. In order to show the usefulness of a designed controller, and the simulation results are verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.417-425
• /
• 2006

This Paper Proposes a method of building a panoramic video from several videos captured from adjacent cameras. The panoramic image which constructed from adjacent and overlapped images is used for photogrammetry, satellite photo or many computer graphic applications. The perspective transformation, which is estimated from the appropriate corresponding pairs of images, can be used to construct the panoramic image without unwarranted distortion and its quality is decided by how to find the features needed for transform estimation. We used the corner points for the corresponding features, and morphological structures were utilized for fast and robust corner detection. We used the criterion of the corner strength, which guarantees the robust detection of the corner in most situations. For the transformation, 8 parameters were estimated from perspective equations which use matched points of adjacent images, and bilinear color blending was used to construct a soapless panoramic video. The experiments showed that the proposed method yields fast results with good quality under various conditions.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.301-306
• /
• 2012

We propose a method for accurate image acquisition in a machine vision system in the present study. The most important feature is required by the various lenses to implement real and of the same high quality image-forming optical role. The input of the machine vision system, however, is generated due to the aberration of the lens distortion. Transformation defines the relationship between the real-world coordinate system and the image coordinate system to solve these problems, a mapping function that matrix operations by calculating the distance between two coordinates to specify the exact location. Tolerance Focus Lens caused by the lens aberration correction processing to Galvanometer laser precision machining operations can be improved. Aberration of the aspheric lens has a two-dimensional shape of the curve, but the existing lens correction to linear time-consuming calibration methods by examining a large number of points the problem. How to apply the Bilinear interpolation is proposed in order to reduce the machining error that occurs due to the aberration of the lens processing equipment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.89-95
• /
• 2015

In this paper, we propose a real-time two-dimensional bar code detection system even at long range using a vision technique. We first perform short-range detection, and then long-range detection if the short-range detection is not successful. First, edge map generation, image binarization, and connect component labeling (CCL) are performed in order to select a region of interest (ROI). After interpolating the selected ROI using bilinear interpolation, a location symbol pattern is detected as the same as for short-range detection. Finally, the symbol pattern is arranged by applying inverse perspective transformation to localize bar codes. Experimental results demonstrate that the proposed system successfully detects bar codes at two or three times longer distance than existing ones even at indoor environment.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.85-96
• /
• 1999

In a number of predictive video compression standards, the motion is compensated by the block-based motion compensation (BMC). The effective motion field used for the prediction by the BMC is obviously discontinuous since one motion vector is used for the entire macro-block. The usage of discontinuous motion field for the prediction causes the blocky artifacts and one obvious approach for eliminating such artifacts is to use a smoothed motion field. The optimal procedure will depend on the type of motion within the video. In this paper, several procedures for the motion vectors are considered. For any interpolation or approaches, however, the motion vectors as provided by the block matching algorithm(BMA) are no longer optimal. The optimum motion vectors(still one per macro-block) must minimize the of the displaced frame difference (DFD). We propose a unified algorithm that computes the optimum motion vectors to minimize the of the DFD using a conjugate gradient search. The proposed algorithm has been implemented and tested for the affine transformation based motion compensation (ATMC), the bilinear transformation based motion compensation (BTMC) and our own filtered motion compensation(FMC). The performance of these different approaches will be compared against the BMC.

• Atmosphere
• /
• v.21 no.3
• /
• pp.243-256
• /
• 2011

This paper presents the development of new algorithm for identifying and tracking the convective cells in three dimensional reflectivity fields in Cartesian coordinates. First, the radar volume data in spherical coordinate system has been converted into Cartesian coordinate system by the bilinear interpolation. The three-dimensional convective cell has then been identified as a group of spatially consecutive grid points using reflectivity and volume thresholds. The tracking algorithm utilizes a fuzzy logic with four membership functions and their weights. The four fuzzy parameters of speed, area change ratio, reflectivity change ratio, and axis transformation ratio have been newly defined. In order to make their membership functions, the normalized frequency distributions are calculated using the pairs of manually matched cells in the consecutive radar reflectivity fields. The algorithms have been verified for two convective events in summer season. Results show that the algorithms have properly identified storm cells and tracked the same cells successively. The developed algorithms may provide useful short-term forecasting or nowcasting capability of convective storm cells and provide the statistical characteristics of severe weather.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2312-2325
• /
• 2013

In this paper, we propose a preprocessing method that it is to correct the distortion of text area in Korean signboard images as a preprocessing step to improve character recognition. Distorted perspective in recognizing of Korean signboard text may cause of the low recognition rate. The proposed method consists of four main steps and eight sub-steps: main step consists of potential vertical components detection, vertical components detection, text-boundary estimation and distortion correction. First, potential vertical line components detection consists of four steps, including edge detection for each connected component, pixel distance normalization in the edge, dominant-point detection in the edge and removal of horizontal components. Second, vertical line components detection is composed of removal of diagonal components and extraction of vertical line components. Third, the outline estimation step is composed of the left and right boundary line detection. Finally, distortion of the text image is corrected by bilinear transformation based on the estimated outline. We compared the changes in recognition rates of OCR before and after applying the proposed algorithm. The recognition rate of the distortion corrected signboard images is 29.63% and 21.9% higher at the character and the text unit than those of the original images.

• Steel and Composite Structures
• /
• v.22 no.3
• /
• pp.589-611
• /
• 2016

The primary objectives of this research are to investigate the energy factor response of steel moment resisting frame (MRF) systems equipped with fuses subject to ground motions and to develop an energy-based evaluation approach for evaluating the damage-control behavior of the system. First, the energy factor of steel MRF systems with fuses below the resilience threshold is derived utilizing the energy balance equation considering bilinear oscillators with significant post-yielding stiffness ratio, and the effect of structural nonlinearity on the energy factor is investigated by conducting a parametric study covering a wide range of parameters. A practical transformation approach is also proposed to associate the energy factor of steel MRF systems with fuses with classic design spectra based on elasto-plastic systems. Then, the energy balance is extended to structural systems, and an energy-based procedure for damage-control evaluation is proposed and a damage-control index is also derived. The approach is then applied to two types of steel MRF systems with fuses to explore the applicability for quantifying the damage-control behavior. The rationality of the proposed approach and the accuracy for identifying the damage-control behavior are demonstrated by nonlinear static analyses and incremental dynamic analyses utilizing prototype structures.