Browse > Article
http://dx.doi.org/10.12989/scs.2016.22.3.589

Energy-factor-based damage-control evaluation of steel MRF systems with fuses  

Ke, Ke (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
Yam, Michael C.H. (Department of Building and Real Estate, The Hong Kong Polytechnic University)
Publication Information
Steel and Composite Structures / v.22, no.3, 2016 , pp. 589-611 More about this Journal
Abstract
The primary objectives of this research are to investigate the energy factor response of steel moment resisting frame (MRF) systems equipped with fuses subject to ground motions and to develop an energy-based evaluation approach for evaluating the damage-control behavior of the system. First, the energy factor of steel MRF systems with fuses below the resilience threshold is derived utilizing the energy balance equation considering bilinear oscillators with significant post-yielding stiffness ratio, and the effect of structural nonlinearity on the energy factor is investigated by conducting a parametric study covering a wide range of parameters. A practical transformation approach is also proposed to associate the energy factor of steel MRF systems with fuses with classic design spectra based on elasto-plastic systems. Then, the energy balance is extended to structural systems, and an energy-based procedure for damage-control evaluation is proposed and a damage-control index is also derived. The approach is then applied to two types of steel MRF systems with fuses to explore the applicability for quantifying the damage-control behavior. The rationality of the proposed approach and the accuracy for identifying the damage-control behavior are demonstrated by nonlinear static analyses and incremental dynamic analyses utilizing prototype structures.
Keywords
steel moment resisting frame system; structural fuse; damage-control; energy factor; single-degree-of-freedom system; evaluation approach;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Erochko, J., Christopoulos, C., Tremblay, R. and Choi, H. (2011), "Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05", J. Struct. Eng., 137(5), 589-599.   DOI
2 Fang, C., Yam, M.C.H., Lam, A.C.C. and Xie, L.K. (2014), "Cyclic performance of extended end-plate connections equipped with shape memory alloy bolts", J. Constr. Steel. Res., 94, 122-136.   DOI
3 Farrow, K.T. and Kurama, Y.C. (2003), "SDOF demand index relationships for performance-based seismic design", Earthq. Spectra., 19(4), 799-838.   DOI
4 Gupta, A. and Krawinkler, H. (2000), "Dynamic P-delta effects for flexible inelastic steel structures", J Struct. Eng., 126(1), 145-154.   DOI
5 Hatzigeorgiou, G.D. (2010), "Ductility demand spectra for multiple near- and far-fault earthquakes", Soil. Dyn. Earthq. Eng., 30(4), 170-183.   DOI
6 Hitaka, T. and Matsui, C. (2003), "Experimental study on steel shear wall with slits", J. Struct. Eng., 129(5), 586-595.   DOI
7 Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the First World Conference on Earthquake Engineering, Berkeley, CA, USA, June.
8 Jiang, Y., Li, G. and Yang, D. (2010), "A modified approach of energy balance concept based multimode pushover analysis to estimate seismic demands for buildings", Eng. Struct., 32(5), 1272-1283.   DOI
9 Ke, K. and Chen, Y.Y. (2014), "Energy-based damage-control design of steel frames with steel slit walls", Struct. Eng. Mech., Int. J., 52(6), 1157-1176.   DOI
10 Ke, K. and Chen, Y.Y. (2016), "Seismic performance of MRFs with high strength steel main frames and EDBs", J. Constr. Steel. Res., 126, 214-228.   DOI
11 Ke, K., Ke, S. and Chuan, G. (2015), "The energy factor of systems considering multiple yielding stages during ground motions", Soil. Dyn. Earthq. Eng., 71, 42-48.   DOI
12 Lee, L.H., Han, S.W. and Oh, Y.H. (1999), "Determination of ductility factor considering different hysteretic models", Earthq. Eng. Struct. Dyn., 28(9), 957-977.   DOI
13 Ye, L.P., Lu, X.Z., Ma, Q.L., Cheng, G.Y., Song, S.Y., Miao, Z.W. and Pan, P. (2008), "Study on the influence of post-yielding stiffness to the seismic response of building structures", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
14 Zahrah, T. and Hall, W. (1984), "Earthquake energy absorption in SDOF structures", J. Struct. Eng., 110(8), 1757-1772.   DOI
15 Park, J.H. (2013), "Seismic response of SDOF systems representing masonry-infilled RC frames with damping systems", Eng. Struct., 56, 1735-1750.
16 Kharmale, S.B. and Ghosh, S. (2013), "Performance-based plastic design of steel plate shear walls", J. Constr. Steel. Res., 90, 85-97.   DOI
17 Kheyroddin, A., Khalili, A., Emami, E. and Sharbatdar, M.K. (2016), "An innovative experimental method to upgrade performance of external weak RC joints using fused steel prop plus sheets", Steel Compos. Struct., Int. J., 21(2), 443-460.   DOI
18 Li, G. and Fahnestock, L. (2012), "Seismic response of single-degree-of-freedom systems representing lowductility steel concentrically braced frames with reserve capacity", J. Struct. Eng., 139(2), 199-211.
19 Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energy-based seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054.   DOI
20 Leelataviwat, S., Saewon, W. and Goel, S.C. (2009), "Application of energy balance concept in seismic evaluation of structures", J. Struct. Eng., 135(2), 113-121.   DOI
21 MacRae, G.A. and Kawashima, K. (1997), "Post-earthquake residual displacements of bilinear oscillators", Earthq. Eng. Struct. Dyn., 26(7), 701-716.   DOI
22 Mohammadi-Gh, M. and Akrami, V. (2010) "Application of Frictional Sliding Fuse in Infilled Frames, Fuse Adjustment and Influencing Parameters", Struct. Eng. Mech., Int. J., 36(6), 715-727.   DOI
23 Moradipour, P., Chan, T.H.T. and Gallage, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., Int. J., 54(1), 105-119.   DOI
24 Nakashima, M., Saburi, K. and Tsuji, B. (1996), "Energy input and dissipation behaviour of structures with hysteretic dampers", Earthq. Eng. Struct. Dyn., 25(5), 483-496.   DOI
25 Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582.   DOI
26 Atlayan, O. and Charney, F.A. (2014), "Hybrid buckling-restrained braced frames", J. Constr. Steel. Res., 96, 95-105.   DOI
27 Calado, L., Proenca, J.M., Espinha, M. and Castiglioni, C.A. (2013), "Hysteretic behavior of dissipative welded fuses for earthquake resistant composite steel and concrete frames", Steel. Compos. Struct., Int. J., 14(6), 547-569.   DOI
28 Charney, F.A. and Atlayan, O. (2011), "Hybrid moment-resisting steel frames", Eng. J., 48(3), 169-182.
29 Cimellaro, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for analytical quantification of disaster resilience", Eng. Struct., 32(11), 3639-3649.   DOI
30 Connor, J.J., Wada, A., Iwata, M. and Huang, Y.H. (1997), "Damage-controlled structures .1. Preliminary design methodology for seismically active regions", J. Struct. Eng., 123(4), 423-431.   DOI
31 De Matteis, G., Landolfo, R. and Mazzolani, F.M. (2003), "Seismic response of MR steel frames with lowyield steel shear panels", Eng. Struct., 25(2), 155-168.   DOI
32 Dougka, G., Dimakogianni, D. and Vayas, I. (2014a), "Innovative energy dissipation systems (FUSEIS 1-1) - Experimental analysis", J. Constr. Steel. Res., 96, 69-80.   DOI
33 Dougka, G, Dimakogianni, D. and Vayas, I. (2014b), "Seismic behavior of frames with innovative energy dissipation systems (FUSEIS 1-1)", Earthq. Struct., 6(5), 561-580.   DOI
34 Vargas, R. and Bruneau, M. (2009b), "Experimental response of buildings designed with metallic structural fuses. II", J. Struct. Eng., 135(4), 394-403.   DOI
35 Newmark, N.M. and Hall, W.J. (1982), Earthquake Spectra and Design, Earthquake Engineering Research Institute, Berkeley, CA, USA.
36 Pekcan, G., Itani, A.M. and Linke, C. (2014), "Enhancing seismic resilience using truss girder frame systems with supplemental devices", J. Constr. Steel. Res., 94, 23-32.   DOI
37 Shome, N., Cornell, C.A., Bazzurro, P. and Carballo, J.E. (1998), "Earthquakes, records, and nonlinear responses", Earthq. Spectra., 14(3), 469-500.   DOI
38 Trifunac, M.D. (2008), "Energy of strong motion at earthquake source", Soil Dyn. Earthq. Eng., 28(1), 1-6.   DOI
39 Vargas, R. and Bruneau, M. (2009a), "Analytical response and design of buildings with metallic structural fuses. I", J. Struct. Eng., 135(4), 386-393.   DOI
40 Wada, A., Connor, J.J., Kawai, H., Iwata, M. and Watanabe, A. (1992), "Damage Tolerant Structure", Proceedings of the 5th US-Japan Workshop on the Improvement of Building Structural Design and Construction Practice, San Diego, CA, USA, September.
41 Wang, W., Chan, T.M. and Shao, H.L. (2015), "Seismic performance of beam-column joints with SMA tendons strengthened by steel angles", J. Constr. Steel. Res., 109, 61-71.   DOI
42 Wongpakdee, N., Leelataviwat, S., Goel, S.C. and Liao, W. (2014), "Performance-based design and collapse evaluation of buckling restrained knee braced truss moment frames", Eng. Struct., 60, 23-31.   DOI
43 Yam, M.C.H., Fang, C., Lam, A.C.C. and Zhang, Y.Y. (2015), "Numerical study and practical design of beam-to-column connections with shape memory alloys", J. Constr. Steel. Res., 104, 177-192.   DOI