• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.120-120
• /
• 2011

Graphene is a carbon based material and it has great potential of being utilized in various fields such as electronics, optics, and mechanics. In order to develop graphene-based logic systems, graphene field-effect transistor (GFET) has been extensively explored. GFET requires supporting devices, such as volatile memory, to function in an embedded logic system. As far as we understand, graphene has not been studied for volatile memory application, although several graphene non-volatile memories (GNVMs) have been reported. However, we think that these GNVM are unable to serve the logic system properly due to the very slow program/read speed. In this study, a GVM based on the GFET structure and using an engineered graphene channel is proposed. By manipulating the deposition condition, charge traps are introduced to graphene channel, which store charges temporarily, so as to enable volatile data storage for GFET. The proposed GVM shows satisfying performance in fast program/erase (P/E) and read speed. Moreover, this GVM has good compatibility with GFET in device fabrication process. This GVM can be designed to be dynamic random access memory (DRAM) in serving the logic systems application. We demonstrated GVM with the structure of FET. By manipulating the graphene synthesis process, we could engineer the charge trap density of graphene layer. In the range that our measurement system can support, we achieved a high performance of GVM in refresh (>10 ${\mu}s$) and retention time (~100 s). Because of high speed, when compared with other graphene based memory devices, GVM proposed in this study can be a strong contender for future electrical system applications.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.55-64
• /
• 2016

In this paper bearing capacity and safety margin of shallow foundation on weathered soil ground against shear failure by using current design method of allowable stress design (ASD), load resistance factor design (LRFD) based on reliability analysis and partial safety factor design (PSFD) in Eurocode were estimated and compared to each other. Results of the plate loading test used in construction and design were collected and analysis of probability statistics on soil parameters affecting the bearing capacity of shallow foundation was performed to quantify the uncertainty of them and to investigate the resistance bias factor and covalence of ultimate bearing capacity. For the typical sections of shallow foundation in domestic field as examples, reliability index was obtained by reliability analysis (FORM) and the sensitivity analysis on soil parameters of probability variables was performed to investigate the effect of probability variable on shear failure. From stability analysis for these sections by ASD, LRFD with the target reiability index corresponding to the safety factor used in ASD and PSDF, safety margins were estimated respectively and compared.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.327-333
• /
• 2016

An autonomous vehicle is a convergence of artificial intelligence and a vehicle which can drive itself while analyzing the real-time situation on a road without a driver. A lot of research achievements have been revealed through the media and Google is considered to be the best leading company in this field. The use of patent information which contains various information such as bibliographic data and information about technologies is a good way to find out the R&D direction of a company and develop a reasonable strategy. This study is aimed at investigating the direction to which Google focuses its R&D capabilities and establishing strategies for technology development. Google's patents about autonomous vehicles were collected and the degree of research bias was analyzed using Social Network Analysis based on citations indicating the quality of a patent. Based on the results, the strategies for technology development was eventually proposed. As a result, it was revealed that Google focused its R&D capabilities on the part of hardware control to make up for its lack of hardware-oriented technologies. As of now, Google obtained remarkable achievements, so it seems reasonable that last-movers consider cooperative research with Google.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.241-241
• /
• 2008

Macrofore formation in silicon and other semiconductors using electrochemical etching processes has been, in the last years, a subject of great attention of both theory and practice. Its first reason of concern is new areas of macropore silicone applications arising from microelectromechanical systems processing (MEMS), membrane techniques, solar cells, sensors, photonic crystals, and new technologies like a silicon-on-nothing (SON) technology. Its formation mechanism with a rich variety of controllable microstructures and their many potential applications have been studied extensively recently. Porous silicon is formed by anodic etching of crystalline silicon in hydrofluoric acid. During the etching process holes are required to enable the dissolution of the silicon anode. For p-type silicon, holes are the majority charge carriers, therefore porous silicon can be formed under the action of a positive bias on the silicon anode. For n-type silicon, holes to dissolve silicon is supplied by illuminating n-type silicon with above-band-gap light which allows sufficient generation of holes. To make a desired three-dimensional nano- or micro-structures, pre-structuring the masked surface in KOH solution to form a periodic array of etch pits before electrochemical etching. Due to enhanced electric field, the holes are efficiently collected at the pore tips for etching. The depletion of holes in the space charge region prevents silicon dissolution at the sidewalls, enabling anisotropic etching for the trenches. This is correct theoretical explanation for n-type Si etching. However, there are a few experimental repors in p-type silicon, while a number of theoretical models have been worked out to explain experimental dependence observed. To perform ordered macrofore formaion for p-type silicon, various kinds of mask patterns to make initial KOH etch pits were used. In order to understand the roles played by the kinds of etching solution in the formation of pillar arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, N-dimethylformamide (DMF), iso-propanol, and mixtures of HF with water on the macrofore structure formation on monocrystalline p-type silicon with a resistivity varying between 10 ~ 0.01 $\Omega$ cm. The etching solution including the iso-propanol produced a best three dimensional pillar structures. The experimental results are discussed on the base of Lehmann's comprehensive model based on SCR width.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2009

Temperature and injection current dependence of electroluminescence(EL) spectral intensity of the $In_xGa_{1-x}N$/GaN multi-quantum wells(MQW) have been studied over a wide temperature range and as a function of injection current level. It is found that a temperature-dependent variation pattern of the EL efficiency under very low and high injection currents shows a drastic difference. This unique EL efficiency variation pattern with temperature and current can be explained field effects due to the driving forward bias in presence of internal(piezo and spontaneous polarization) fields. Increase of the indium content in $In_xGa_{1-x}N$/GaN multiple quantum wells gives rise to a redshift of 80 meV and 22 meV for green and blue MQW, respectively. It can be explained by carrier localization by potential fluctuation of multiple quantum well and MQW structures also shows a keen difference owing to the different indium content in InGaN/GaN MQW.

• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.234-246
• /
• 2009

Characteristics of speckle errors of Sea-viewing Wide Field-of-view Sensor (SeaWiFS) chlorophyll-${\alpha}$ concentration were analyzed, and its causes were investigated by using SeaWiFS data in the East Sea from September 1997 to December 2007. The speckles with anomalously high concentrations were randomly distributed and showed remarkably high bias of greater than $10mg/m^3$, compared with their neighboring pixels. The speckles tended to appear frequently in winter, which might be related to cloud distribution. Ten-year averaged cloudiness of winter was much higher over the southeastern part, with frequent speckles, than the northwestern part of the East Sea. Statistical analysis results showed that the number of the speckles was increased as cloudiness increased. Normalized water-leaving radiance of the speckle pixel was considerably low at the short wavelengths (443, 490, and 510 nm), whereas the radiance at 555 nm band was normal. These low measurements produced extraordinarily high concentration from the chlorophyll-${\alpha}$ estimation formula. This study presented the speckle errors of SeaWiFS chlorophyll-${\alpha}$ concentration in the East Sea and suggested that more reliable chlorophyll-${\alpha}$ data based on appropriate ocean color remote sensing techniques should be used for the oceanic application researches.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.185-185
• /
• 2019

Sustaining future wheat production is challenged by anthropogenically forced climate warming and drying led by increased concentration of greenhouse gases all around the globe. Warming stresses, originating from the elevated $CO_2$ concentration, are continuously reported to have negative impacts on wheat growth and yield. Yet, elevated $CO_2$ concentration, despite being disparagingly blamed for promoting warming, is also associated with a phenomenon called $CO_2$ enrichment; in which wheat yield can improve due to the enhanced photosynthesis rates and less water loss through transpiration. The conflicting nature of climate warming and $CO_2$ enrichment and their interplay can have specific implications under different environments. It is established form the field and simulation studies that the two contrasting phenomena would act severely in their own respect under arid and semi-arid environments. Wheat is a dietary staple for masses in Pakistan. The country's wheat production system is under constant stress to produce more from irrigated agricultural lands, primarily lying under arid to semi-arid environments, to meet the rapidly growing domestic needs. This work comprehensively examines the warming impacts over wheat yield and water productivity (WP), with and without the inclusion of $CO_2$ enrichment, under semi-arid environment of Punjab which is the largest agricultural province of Pakistan. Future wheat yields and WPs were simulated by FAO developed AquaCrop model v 5.0. The model was run using the bias-correction climate change projections up to 2080 under two representative concentration pathways (RCP) scenarios: 4.5 and 8.5. Wheat yield and WPs decreased without considering the $CO_2$ enrichment effects owing to the elevated irrigation demands and accelerated evapotranspiration rates. The results suggested that $CO_2$ enrichment could help maintain the current yield and WPs levels during the 2030s (2021-2050); however, it might not withhold the negative climate warming impacts during the 2060s (2051-2080). Furthermore, 10 - 20 day backward shift in sowing dates could also help ease the constraints imposed by climate warming over wheat yields and WPs. Although, $CO_2$ enrichment showed promises to counteract the adverse climate warming impacts but the interactions between climate warming and $CO_2$ concentrations were quite uncertain and required further examination.

• Asian Journal of Turfgrass Science
• /
• v.20 no.2
• /
• pp.223-235
• /
• 2006

Soil testing laboratories unfamiliar with turfgrasses will often overestimate the plant's need for phosphorus and underestimate the need for potassium. This is partly due to differences in rooting between grasses and many garden plants and crops. The grasses are generally more efficient in extracting phosphorus from the soil, reducing their need for phosphorus fertilizer. The fact that crop yield is often the primary objective in field crop production, and is usually of little interest in turfgrass management, may affect soil test interpretation for potassium. Potassium levels above those required for maximum tissue yield of grasses may improve stress tolerance and turfgrasses will usually benefit from higher applications of this element. There are also diffrrences in soil testing philosophies. Some laboratories use the sufficiency level of available nutrients(SLAN) approach, whereas others prefer the basic cation saturation ratio(BCSR) approach. Some will use a combination of the two methods. The use of the BCSR theory easily lends itself to abuse and questionable fertilizer applications and products are sometimes recommended citing imbalances in cation ratios. The usefulness of the BCSR ratio theory of soil testing varies with soil texture and interpretations on tests performed on sand-based media are particularly a problem. Other soil testing problems occur when sand-based media used on sports fields and golf greens contain free calcium carbonate. The ammonium acetate extractant at pH 7.0 dissolves excessive amounts of calcium that can bias cation exchange capacity measurements and measurements of cation ratios. Adjusting the pH of the extractant to 8.1 can improve the accuracy of the testing procedure for calcareous media.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.175-190
• /
• 2022

Abusive supervision occurs in a social context in which third-party observers react and interact with the abused victims and supervisors. Despite the importance of third-party observers' behavior in abusive supervision, research on abusive supervision has mainly focused on the dyadic relationship between direct victims and supervisors. Although in recent years research on third parties' reactions to peer abusive supervision has attracted growing attention, there are still insufficient studies examining the topic especially within domestic research in Korea. As such, this study comprehensively reviews empirical studies on third parties' reactions to peer abusive supervision and aims to broaden the scope of research in the field. Firstly, the results of previous studies show that the effects of observed peer abusive supervision are mediated by cognitive and affective processes. Secondly, previous studies are found to investigate the boundary conditions where the effects of observed peer abusive supervision can be amplified or mitigated with regard to various outcomes. Overall, compared to research on direct victims, research on third-party observers of abusive supervision is found to capture a wider spectrum of responses. In order to explain the mechanisms of this phenomena, this study thoroughly examines theoretical assumptions presented in previous studies and categorizes them into five theory types. Finally, this study identifies a couple of central methodological issues, including common method bias and inadequate model specification in the literature and suggests future research directions.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.313-319
• /
• 2022

AlGaN/GaN based HfO₂ MOSHEMT (metal oxide semiconductor high electron transistor) with different gate recess depth was simulate to demonstrate a successful normally-off operation of the transistor. Three types of the HEMT structures including a conventional HEMT, a gate-recessed HEMT with 3 nm thick AlGaN layer, and MIS-HEMT without AlGaN layer in the gate region. The conventional HEMT showed a normally-on characteristics with a drain current of 0.35 A at V_G = 0 V and V_DS = 15 V. The recessed HEMT with 3 nm AlGaN layer exhibited a decreased drain current of 0.15 A under the same bias condition due to the decrease of electron concentration in 2DEG (2-dimensional electron gas) channel. For the last HEMT structure, distinctive normally- off behavior of the transistor was observed, and the turn-on voltage was shifted to 0 V.