• 응용통계연구
• /
• 제16권2호
• /
• pp.305-319
• /
• 2003

본 연구에서는 바이어스 필드에 의해 왜곡된 MRI 영상에 대한 분할을 위해 확장된 EM 알고리즘을 기반으로 한 통계적 접근법을 제시한다. 영상의 명암값을 자료로 하는 분할기법들은 고주파 성분의 잡음 뿐만 아니라 영상을 불균질하게 만드는 바이어스 필드라는 저주파 성분의 왜곡에 특히 취약하다. 이 문제를 해결하기 위해 본 논문에서는 잡음을 효과적으로 제어하기 위해 마코프랜덤필드가 적용된 정규혼합모형을 고려하며, 효과적인 바이어스 필드의 보정을 위해 페널티-우도를 도입하여 추정하는 방법으로 고안되었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.100.2-100.2
• /
• 2009

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.168-171
• /
• 2009

We propose a new type of spin torque nano-oscillator structure with an exchange- biased free rotating layer. The proposed spin torque nano-oscillator consists of a fixed layer and a free rotating layer with an additional anti-ferromagnetic layer, which leads to an exchange bias in the free rotating layer. The spin dynamics of the exchange-biased free rotating layer can be described as an additional exchange field because the exchange bias manifests itself by the existance of a finite exchange bias field. The exchange bias field plays a similar role to that of a finite external field. Hence, microwave generation can be achieved without an external field in the proposed structure.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.923-929
• /
• 2004

A magnetostrictive sensor is a sensor measuring elastic waves. Because of its unique non-contact measurement feature, the sensor receives more attentions in recent years. These sensors have been mainly used to measure longitudinal and torsional waves in ferromagnetic waveguides, but there increases an interest in using the sensor for flexural wave measurement. Since the performance of the sensor is strongly influenced by the applied bias magnetic field distribution, the design of the bias magnetic system providing the desired magnetic field is critical. The motivation of this investigation is to design a bias magnetic system consisting of electromagnets and yokes and the specific objective is to formulate the design problem as a bias yoke topology optimization. For the formulation, we employ linear magnetic behavior and examine the optimized results for electromagnets located at various locations. After completing the design optimization, we fabricate the prototype of the proposed bias magnetic system, and test its performance through flexural wave measurements.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.215-220
• /
• 2014

This study investigates the dynamic magneto-mechanical behavior of magnetization-graded ferromagnetic materials Terfenol-D/FeCuNbSiB (MF). We measure the dynamic magneto-mechanical properties as a function of the DC bias magnetic field ($H_{dc}$). Our experimental results show that these dynamic magneto-mechanical properties are strongly dependent on the DC bias magnetic field. Furthermore, the dynamic strain coefficient, electromechanical resonance frequency, Young's moduli, and mechanical quality factor of Terfenol-D/FeCuNbSiB are greater than those of Terfenol-D under a lower DC bias magnetic field. The dynamic strain coefficient increases by a factor of between one and three, under the same DC bias magnetic field. In particular, the dynamic strain coefficient of Terfenol-D/FeCuNbSiB at zero bias achieves 48.6 nm/A, which is about 3.05 times larger than that of Terfenol-D. These good performances indicate that magnetization-graded ferromagnetic materials show promise for application in magnetic sensors.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.177-182
• /
• 2017

This paper describes an unscented Kalman filter approach to estimate the bias in magnetic field measurements. A microelectromechanical systems attitude heading reference system (MEMS AHRS) was used to measure the magnetic field, together with the acceleration and angular rate. A magnetic field is usually used for yaw detection, while the acceleration serves to detect the roll and pitch. Magnetic field measurements are vulnerable to distortion due to hard-iron effect and soft-iron effect. The bias in the measurement accounts for the hard-iron effect, and this paper focuses on an approach to estimate this bias. The proposed method is compared with other methods through experiments that implement the navigation of an underwater robot using an AHRS and Doppler velocity log. The results verify that the compensation of the bias by the proposed method improves the navigation performance more than or comparable to the compensation by other methods.

• 한국항공우주학회지
• /
• 제36권11호
• /
• pp.1126-1131
• /
• 2008

본 논문은 궤도 기하학 기반 바이어스 추정기법을 다목적실용위성 1호 및 2호의 자기센서 측정데이터에 적용하여 위성체 태양전지판과 전장박스에서 발생하는 유도자기장 바이어스를 추정한다. 유도자기장 바이어스의 추정과 적절한 보정은 자기센서의 노후화를 대처하고 수명을 최대한 연장하여 정상적으로 위성 임무를 수행을 가능하게 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.554-558
• /
• 2002

A magnetostrictive sensor is used to measure stress waves propagating in a ferromagnetic cylinder without physical contact. The performance of a magnetostrictive sensor is affected most significantly by the bias magnetic field applied around the measurement location. The goal of this paper is to carry out the topology optimization of the bias magnet and yoke assembly to maximize the sensor output for traveling bending waves. We will use the multi-resolution topology optimization strategy to find the assembly of the bias magnet and the yoke that is easy to realize. The effectiveness of the present design is confirmed by an actual measurement of the sensor signal with the proposed bias magnet and yoke configuration.

• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.382-385
• /
• 2021

Electrical poling is a crucial step to convert ferroelectrics to piezoelectrics. Nevertheless, no systematic investigation on the effect of poling has been reported. Given that the poling involves an alignment of spontaneous polarization, the condition for poling should be different when a material has an internal bias field that influences the domain stability. Here, we present the effect of poling profile on the dielectric and piezoelectric properties in Mn-doped Pb(Mg_1/3Nb_2/3)O₃-29 mol%PbTiO₃ single crystal with an internal bias field. We showed that both the dielectric permittivity and the piezoelectric coefficient were further enhanced when the poling procedure ends with a field application along the opposite direction to the internal bias field. We expect that the current finding would give a clue to understanding the true mechanism for the electrical poling.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.176-187
• /
• 2015

DC bias will cause abnormal vibration of transformers. Aiming at such a problem, transformer vibration affected by DC bias has been studied combined with transformer core and winding vibration mechanism use multi-physical field simulation software COMSOL in this paper. Furthermore the coupling model of electromagnetic-structural force field has been established, and the variation pattern of inner flux density, distribution of mechanical stress, tension and displacement were analyzed based on the coupling model. Finally, an experiment platform has been built up which was employed to verify the correctness of model.