• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.19-22
• /
• 2004

This paper implemented 2.14GHz band Adaptive Hybrid Doherty (AHD) amplifier, as well as, wished to improve the high power characteristics and efficiency by composing bias adjustment circuit with LDMOS. Finally, through CAE, confirmed that AHD amplifier have superior performance than hybrid balanced amplifier. Superior characteristics of AHD amplifier is expected to affect immensely in amplifier field hereafter.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.3
• /
• pp.188-196
• /
• 2004

Amplifier linearity plays a major role in the quality of mordern communication systems. The Power amplifier should be operated near saturation region to achieve high efficiency But at this region amplitude and phase distortions of the amplifier remarkably increase with the input power increase and cause a significant adjacent channel interference. In this paper, an independently controllable AM/AM and AM/PM predistortion linearizers consisted of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate tile power amplifier non-linearities. The predistortion linearizer can improve the ACPR by 5.3dB with cdma2000 multi carrier signals. And by applying this linearizer to two-tone(880MHz) power amplifier, third order IMD products are improved up to 8(dB).

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2690-2692
• /
• 2003

Amplifier linearity plays a major role in the design of mordern communication systems. An independently controllable AM/AM and AM/PM predistortion linearizers that consists of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate the power amplifier non-linearities. The predistortion linearizer can improve the ACPR by SdB with cdma2000 multi carrier signals. By applying this linearizer to two-tone 880MHz power amplifier, an improvement of adjacent channel leakage power up to 5dBm has been achieved.

• The Korean Journal of Applied Statistics
• /
• v.30 no.3
• /
• pp.453-462
• /
• 2017

Double propensity score adjustment is an analytic solution to address bias due to incomplete matching. However, it is difficult to estimate the standard error of the estimated treatment effect when using double propensity score adjustment. In this study, we propose two bootstrap methods to estimate the standard error. The first is a simple bootstrap method that involves drawing bootstrap samples from the matched sample using the propensity score as well as estimating the standard error from the bootstrapped samples. The second is a complex bootstrap method that draws bootstrap samples first from the original sample and then applies the propensity score matching to each bootstrapped sample. We examined the performances of the two methods using simulations under various scenarios. The estimates of standard error using the complex bootstrap were closer to the empirical standard error than those using the simple bootstrap. The simple bootstrap methods tended to underestimate. In addition, the coverage rates of a 95% confidence interval using the complex bootstrap were closer to the advertised rate of 0.95. We applied the two methods to a real data example and found also that the estimate of the standard error using the simple bootstrap was smaller than that using the complex bootstrap.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.207-213
• /
• 2007

For several years, although the demand of high accuracy kinematic positing using multiple bases has been increased, most of the commercial GPS processing softwares can provide the single-baseline solutions only. Thus, we studied the methods to improve the accuracy of the kinematic positioning using the network configuration based on the several single-baseline solutions. As discussed in this study, the positioning accuracy as well as the network stability is improved by introducing the geodetic network adjustment theories into the kinematic positioning application. Three different methods to remove the rank-deficiency, RLESS, BLIMPBE and SCLESS, are analyzed in this study. The 3D RMS error has been improved from 3.5cm(max) to 2.1cm using the network-based kinematic positioning, and it is desired to choose BLIMPBE and SCLESS depending on the accuracy of the base stations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2006

This study determines the optimum polynomial of exterior orientation parameters(EOPs) as a function of line number of linear array scanner. To estimate priori EOPs, meta data of IKONOS scene and ground control points are used. We select a first order polynomial and a constant for position elements modeling and rotation elements modeling. Positioning accuracy of the determined EOPs is compared with that of RPCs bias-corrected by the least squares adjustment. There is almost no difference between accuracies of the two methods. To obtain digital elevation model(DEM), matching line is established by the EOPs. The DEM is compared with DEM generated by ERDAS IMAGINE software, which utilizes the bias-corrected RPCs. Height differences of DEMs by the two methods are ranged within a allowable standard deviation. The produced DEM, therefore, shows accuracy similar to the verified method.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.277-297
• /
• 2009

This paper empirically investigates a long-run and short-run equilibrium relationships for exchange rate and stock prices in Korea and Japan from January 1998 to July 2008. Because using monthly data in my study, analyzes unit root test and VEC model including seasonality to overcome bias that happen in seasonal adjustment. The empirical evidence suggests that exists strong evidence supporting the long-run cointegration relationships between exchange rates and stock prices of the Korea and Japan. This implies that it is possible to predict one market from another for both countries, which seems to violate the efficient market hypothesis. In the long-run a negative relationship running from the KRW/JPY real exchange rate to the stock prices of Korea strongly argues for the traditional approach.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.69-77
• /
• 2012

Surface insolation is one of the major indicators for climate research over the Earth system. For the climate research, long-term data and wide range of spatial coverage from the data observed by two or more of satellites of the same orbit are needed. It is important to improve the continuity and consistency of the derived products, such as surface insolation, from different satellites. In this study, surface insolations based on Geostationary Operational Environmental Satellite (GOES-9) and Multi-functional Transport Satellites (MTSAT-1R) were compared during overlap period using physical model of insolation to find ways to improve the consistency and continuity between two satellites through comparison of each channel data and ground observation data. The thermal infrared brightness temperature of two satellites show a relatively good agreement between two satellites : rootmean square error (RMSE)=5.595 Kelvin; Bias=2.065 Kelvin. Whereas, visible channels shown a quite different values, but it distributed similar tendency. And the surface insolations from two satellites are different from the ground observation data. To improve the quality of retrieved insolations, we have reproduced surface insolation of each satellite through adjustment of the Cloud Factor, and the Cloud Factor for GOES-9 satellite is modified based on the analysis result of difference channel data. As a result, the insolations estimated from GOES-9 for cloudy conditions show good agreement with MTSAT-1R and ground observation : RMSE=$83.439W\;m^{-2}$ Bias=$27.296W\;m^{-2}$. The result improved accuracy confirms that the modification of Cloud Factor for GOES-9 can improve the continuity and consistency of the insolations derived from two or more satellites.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.4
• /
• pp.153-178
• /
• 2018

Most operational uses of wind speed data require measurements at, or estimates generated for, the reference height of 10 m above mean sea level (AMSL). On the Ieodo Ocean Research Station (IORS), wind speed is measured by instruments installed on the lighthouse tower of the roof deck at 42.3 m AMSL. This preliminary study indicates how these data can best be converted into synthetic 10 m wind speed data for operational uses via the Korea Hydrographic and Oceanographic Agency (KHOA) website. We tested three well-known conventional empirical neutral wind profile formulas (a power law (PL); a drag coefficient based logarithmic law (DCLL); and a roughness height based logarithmic law (RHLL)), and compared their results to those generated using a well-known, highly tested and validated logarithmic model (LMS) with a stability function (${\psi}_{\nu}$), to assess the potential use of each method for accurately synthesizing reference level wind speeds. From these experiments, we conclude that the reliable LMS technique and the RHLL technique are both useful for generating reference wind speed data from IORS observations, since these methods produced very similar results: comparisons between the RHLL and the LMS results showed relatively small bias values ($-0.001m\;s^{-1}$) and Root Mean Square Deviations (RMSD, $0.122m\;s^{-1}$). We also compared the synthetic wind speed data generated using each of the four neutral wind profile formulas under examination with Advanced SCATterometer (ASCAT) data. Comparisons revealed that the 'LMS without ${\psi}_{\nu}^{\prime}$ produced the best results, with only $0.191m\;s^{-1}$ of bias and $1.111m\;s^{-1}$ of RMSD. As well as comparing these four different approaches, we also explored potential refinements that could be applied within or through each approach. Firstly, we tested the effect of tidal variations in sea level height on wind speed calculations, through comparison of results generated with and without the adjustment of sea level heights for tidal effects. Tidal adjustment of the sea levels used in reference wind speed calculations resulted in remarkably small bias (<$0.0001m\;s^{-1}$) and RMSD (<$0.012m\;s^{-1}$) values when compared to calculations performed without adjustment, indicating that this tidal effect can be ignored for the purposes of IORS reference wind speed estimates. We also estimated surface roughness heights ($z_0$) based on RHLL and LMS calculations in order to explore the best parameterization of this factor, with results leading to our recommendation of a new $z_0$ parameterization derived from observed wind speed data. Lastly, we suggest the necessity of including a suitable, experimentally derived, surface drag coefficient and $z_0$ formulas within conventional wind profile formulas for situations characterized by strong wind (${\geq}33m\;s^{-1}$) conditions, since without this inclusion the wind adjustment approaches used in this study are only optimal for wind speeds ${\leq}25m\;s^{-1}$.

• The Journal of Korean Association of Computer Education
• /
• v.23 no.1
• /
• pp.63-75
• /
• 2020

From the perspective of compliance with security policies by members of the organization, which is a major cause of security incidents, this study presented biased thinking as factors that affect compliance with security policies and verified the following: First, the impact of biased thinking on security policies on compliance with security policies is verified. Second, the participation of management, perceived risk, education and punishment of management will verify the adjustment effect of increasing or decreasing biased thinking. Finally, we have verified that compliance attitudes have a significant impact on compliance behavior. To this end, 157 people were surveyed, statistical analysis of research models and structural equations, and conformity analysis were conducted. Studies have shown that biased thinking has a negative effect on the attitude of compliance with information security. In addition, it was analyzed that the attitude of compliance with information security policy increases policy compliance behavior. On the other hand, the higher the perceived risk of information security, the lower the bias was the adjustment effect, but management's participation, education and punishment were found to have no adjustment effect.