• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4280-4295
• /
• 2022

In this paper, a new multi-group neutron-gamma transport calculation code system STRAUM-MATXST for complicated geometrical problems is introduced and its development status including numerical tests is presented. In this code system, the MATXST (MATXS-based Cross Section Processor for S_N Transport) code generates multi-group neutron and gamma cross sections by processing MATXS format libraries generated using NJOY and the STRAUM (S_N Transport for Radiation Analysis with Unstructured Meshes) code performs multi-group neutron-gamma coupled transport calculation using tetrahedral meshes. In particular, this work presents the recent implementation and its test results of the Krylov subspace methods (i.e., Bi-CGSTAB and GMRES(m)) with preconditioners using DSA (Diffusion Synthetic Acceleration) and TSA (Transport Synthetic Acceleration). In addition, the Krylov subspace methods for accelerating the energy-group coupling iteration through thermal up-scatterings are implemented with new multi-group block DSA and TSA preconditioners in STRAUM.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.181-194
• /
• 2023

The primary objective of this study is to examine the influence of geometry on the stability characteristics of cylindrical microstructures. This investigation entails a stability analysis of a bi-directional functionally graded (BD-FG) cylindrical imperfect concrete beam, focusing on the impact of geometry. Both the first-order shear deformation beam theory and the modified coupled stress theory are employed to explore the buckling and dynamic behaviors of the structure. The cylinder-shaped imperfect beam is constructed using a porosity-dependent functionally graded (FG) concrete material, wherein diverse porosity voids and material distributions are incorporated along the radial axis of the beam. The radius functions are considered in both uniform and nonuniform variations, reflecting their alterations along the length of the beam. The combination of these characteristics leads to the creation of BD-FG configurations. In order to enable the assessment of stability using energy principles, a numerical technique is utilized to formulate the equations for partial derivatives (PDEs).

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.1-13
• /
• 1998

In the present paper, the hydrodynamic characteristics of three dimensional hydrofoils moving with a constant speed below the free surface using a higher-order boundary element method based on 9-node Lagrangian curvilinear elements are investigated. A bi-quadratic spline scheme is employed to improve the numerical results on the free surface. To validate the present scheme, the calculated results are compared with the analytic solutions for a submerged sphere and a spheroid showing a good agreement. For the validation of the hydrofoil study, the computed lift and drag of a hydrofoil having $NACA64_{1}A412$ section with aspect ratio(A.R.) of 4 are compared with the experimental data by Wadlin et al.[28]. The comparison covers a number of variations of angle of attack and submergence depth. Then, using an A.R. hydrofoil with NACA0012 section, the free surface on the lift and drag are investigated and these are compared with the previous results. The wave elevations and patterns created by the aforementioned submerged bodies are also investigated with Froude numbers and submergences.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.768-775
• /
• 2005

In this paper, the broadband cross monopole antenna is presented and the radiation characteristics is investigated f3r various width and height of the radiated element. In the presented antenna, the broadband characteristics is realized by the cross monopole element and the impedance matching section between the element and the ground. To conform the broadband characteristics of the presented antenna, the experimental antenna is designed, fabricated, and its radiation characteristics are measured in $1.75\~2.655$ GHz. It is shown that the designed antenna has the nondirectional pattern in the horizontal plane, the directional pattern in the vertical plane, VSSR less than 1.5, and gain in $2.5\~3.78$ dBi. From these results, the presented antenna is conformed as a broadband indoor antenna which can be used for PCS, WCDMA, Wibro, and satellite DMB band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1316-1324
• /
• 2009

In this paper, cross-aperture coupled microstrip circular polarization antenna is proposed for 5.8 GHz WLAN(Wireless Local Area Network). A single antenna consists of square patch and slots are located in series feed line with $\lambda_g$/4 phase different which make current direction maximum and minimum repeatedly to generate RHCP(Right Handed Circularly Polarization). We are proposed new structure that removed the section which intersected at a right angle and were composed to four separated slots. The proposed cross slots reduce back lobe of radiation pattern and improve antenna gain. Impedance bandwidth of the manufactured $2\times2$ array antenna is from 5.67 to 5.95 GHz and the maximum radiation gain is 10.59 dBi.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.813-818
• /
• 2020

This study is a study on the characteristics and analysis of the reflected signals about the target in the VHF band. In advance, the RCS(Radar Cross Section) characteristics of the target were analyzed by using the CST electromagnetic analysis tool, and the target was detected by using the Bi-Static method, and the change in the signal-to-noise ratio was tested. The test results show similar results with no significant fluctuations in the signal-to-noise ratio characteristics for the detection of signals reflected on the target, such as the results for RCS analysis according to the pre-incidence angle. In the future, this study will be used for RCS analysis of the targets and target detection of Radar in VHF/UHF band with relatively large wavelength compared to the X band.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.497-501
• /
• 2004

In this paper, it is presented a level sensor for measuring a level of the contents of cargo tank using frequency modulated continuous wave(FMCW). The frequency range is 10∼11 GHz, the radar cross section(RCS) of test target is $0.8\textrm{m}^2$ of metal plate. The experiment is performed in laboratory and open ground, the sweep time of the signal is 100 ms, the pyramidal horn antenna of about 22 dBi gain is used, and input power of antenna is about 8 dBm The beat frequency according to the target moving to 40 m is measured. There is a good agreement between measured and calculated results. But the resolution of the FMCW radar is measured about 10 cm due to nonlinear of voltage controlled oscillator(VCO).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.308-315
• /
• 2018

In this paper, we present the basic design results for high-resolution radar development at S-band frequency that can precisely measure the miss distance between two targets. The basic system requirement is proposed for the design of a 3.5 GHz linear frequency-modulated (LFM) radar with maximum detection distance and distance resolution of 2 km and 1 m, respectively, and the specifications of each module are determined using the radar equation. Our calculations revealed a signal-to-noise ratio ${\geq}30dB$ with a bandwidth of 150 MHz, transmission power of 43 dBm for the power amplifier, gain of 26 dBi for the antenna, noise figure of 8 dB, and radar cross-section of $1m^2$ at a target distance of 2 km from the radar. Based on the calculation results and the theory and method of LFM radar design, the hardware was designed using software defined radar technology. The results of the subsequent field test are presented that prove that the designed radar system satisfies the requirements.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.476-481
• /
• 2009

Bi-directional load test is one of O-cell tests. The O-cell test is a system which may be used for performing static load tests on cast in situ reinforced concrete bored piles. The technique was devised and developed by Osterberg of Northwestern University(USA) and has been in use around the world. The principle of the method is that an O-cell is installed in a cast in situ bored pile base. Once the pile concrete reaches its design strength the cell is connected to an hydraulic pump and pressured. Pressurization causes the cell to expand, developing an upward force on the section of pile above the cell loads, pile movements and strains within the pile then enable the capacity of the pile and its load settlement curves to be ascertained. The O-cell pile load test with variable end plate is operated on second steps - the first step is to confirming end bearing capacity with variable end plate and the second step is similar to the conventional O-cell test. In the study, To calculate ultimate capacity of bi-directional load test using model with the pile with variable end plate O-cell.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.216-219
• /
• 2016

In this paper, the SIW(Substrate Integrated Waveguide)-based feeding antenna for the application of SDR(Software Defined Radar) is designed and manufactured. It is usually well-known that SIWs are easily integrated on PCB and have low transmission loss toward high powered input signal. Also, it is recommended that SIWs are strongly immunized to Electromagnetic Interferences(EMI). In particular, the manufactured antennas are loaded on the USRP(Universal Software Radio Peripheral) platform and employed to detect target RCS as an experiment in this paper. The operating frequency of the proposed antenna is in ISM(Industrial, Scientific and Medical) band(2.4~2.48 GHz) and the measured gain is over 8 dBi at 2.44 GHz.