• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.189-192
• /
• 2000

High-temperature superconductor of Bi-2212 system was fabricated by CFP(centrifugal forming process). To make a uniform specimen slurry was prepared in the ratio of 7:3(powder:binder) and ball milled for 24 hours. Milled slurry was charged into a rotating mold with 450 rpm and dried at room temperature. Then the specimen was performed binder burn-out at 35$0^{\circ}C$ and heated for partial melting to 86$0^{\circ}C$. XRD analysis of most specimens were shown 2212 phase and observed a local plate shaped microstructure with a well aligned c-axis direction from SEM images. T$_{c}$(Critical temperature) of Bi-2212 was 64K.K.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.367-368
• /
• 2017

본 논문에서는 영전류 모드로 진입한 zero voltage transition(ZVT) interleaved bi-direction low voltage DC-DC converter(IB-LDC)의 도통 손실을 최소화하기 위한 위상 제어가 제안된다. IB-LDC의 출력단 배터리가 완충되어 영전류 모드로 진입하면 IB-LDC의 입 출력 평균 전류는 0[A]로 감소하지만 보조 회로 전류는 기존의 설계 값에 의해 감소하지 않아 지속적인 도통 손실을 일으킨다. 따라서 본 논문에서는 영전류 모드로 진입한 IB-LDC의 보조 회로에 ZVT 조건을 만족시키는 공진 전류만 흐르도록 하여 도통 손실을 최소화하는 위상 제어를 제안하였다. 또한 PSIM simulation 및 실험을 통해 증명하였다.

• 대한의용생체공학회:의공학회지
• /
• 제8권1호
• /
• pp.75-80
• /
• 1987

With the conventional CW Doppler velocity meter, bl-directional velocities cannot be separated. The new CW Doppler system uses quadrature detection and phase rotation to produce simultaneous independent audio and velocity signals for forward and reverse blood flow direction, is fabricated. Specially, this system shows that phase rotation method for flow direction separation provides easy and satisfactory feature. From in vivo blood flow measurement, we can easily differentiate typical artery flow from vein flow, and measure both velocity characteristics qualitatively.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.97-102
• /
• 2023

본 논문에서는 두 개의 수신안테나를 이용한 저가 레이더를 구현하기 위한 송수신 안테나를 제작하고 그 특성을 분석하였다. 안테나는 수평방향으로의 빔 집중과 저가격을 위해 MPA(Microstrip Patch Array) 구조로 설계하였으며 사이드로브(sidelobe)를 억제하기 위해 테일러 배열 패턴 합성을 이용하였다. 측정 결과 사용대역인 24GHz ISM 밴드(24.0-24.25GHz) 내에서 안테나 이득이 15.2-16.26 dBi를 나타내어 설계 스펙인 15dBi이상 17dBi이하의 조건을 만족하였다. 사이드로브는 동작 주파수가 24.0 GHz, 24.125 GHz, 24.25 GHz일 때 각각 -13.15 dBc, -13.1 dBc, 및 -12.8 dBc로서 -10.0 dBc이하의 스펙을 만족하였다.

• 한국분말재료학회지
• /
• 제31권1호
• /
• pp.50-56
• /
• 2024

We report the effect of plastic deformation on the thermoelectric properties of n-type Bi₂Te_2.5Se_0.5 compounds. N-type Bi₂Te_2.5Se_0.5 powders are synthesized by an oxide-reduction process and consolidated via spark-plasma sintering. To explore the effect of plastic deformation on the thermoelectric properties, the sintered bodies are subjected to uniaxial pressure to induce a controlled amount of compressive strains (-0.2, -0.3, and -0.4). The shaping temperature is set using a thermochemical analyzer, and the plastic deformation effect is assessed without altering the material composition through differential scanning calorimetry. This strategy is crucial because the conventional hot-forging process can often lead to alterations in material composition due to the high volatility of chalcogen elements. With increasing compressive strain, the (00l) planes become aligned in the direction perpendicular to the pressure axis. Furthermore, an increase in the carrier concentration is observed upon compressive plastic deformation, i.e., the donor-like effect of the plastic deformation in n-type Bi₂Te_2.5Se_0.5 compounds. Owing to the increased electrical conductivity through the preferred orientation and the donor-like effect, an improved ZT is achieved in n-type Bi₂Te_2.5Se_0.5 through the compressive-forming process.

• 대한전자공학회논문지TC
• /
• 제49권6호
• /
• pp.63-70
• /
• 2012

UWB 주파수대역의 안테나로써 CPW 급전의 U-자형 평면 패치 안테나모델의 지향성이득 향상 방법을 검토하였다. 지향성 이득 향상을 위해 CPW 급전의 U-자형 패치 안테나 모델에 개구슬롯 반사면을 부가하여 마이크로스트립 구조로 재구성하였다. 재구성한 안테나는 특성 임피던스 $50.08{\Omega}$에 대해 반사계수는 -6.5dB(VSWR < 3.3)이하이며 지향성이득은 7.8 dBi ~ 9.6 dBi, 전후방비는 17.8dB ~ 28.7dB 그리고 ${\theta}=0^{\circ}$의 주방사 방향에 대해 -3dB 방사각의 범위가 ${\pm}30^{\circ}$의 방사지향성의 패턴을 나타내 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.272.1-272.1
• /
• 2016

In a three-dimensional topological insulator Bi2Se3, a stress control for band gap manipulation was predicted but no systematic investigation has been performed yet due to the requirement of large external stress. We report herein on the strain-dependent results for Bi2Se3 films of various thicknesses that are grown via a self-organized ordering process. Using small angle X-ray scattering and Raman spectroscopy, the changes of d-spacings in the crystal structure and phonon vibration shifts resulted from stress are clearly observed when the film thickness is below ten quintuple layers. From the UV photoemission/inverse photoemission spectroscopy (UPS/IPES) results and ab initio calculations, significant changes of the Fermi level and band gap were observed. The deformed band structure also exhibits a Van Hove singularity at specific energies in the UV absorption experiment and ab initio calculations. Our results, including the synthesis of a strained ultrathin topological insulator, suggest a new direction for electronic and spintronic applications for the future.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.27-30
• /
• 2003

The Bi2212 based HTS tubes with 4 different compositions, Bi:Sr:Ca:Cu = 2.0:2.0:1.0:2.0, 2.1:2.0:1.0:2.0,2.2:1.8:1.0:2.0 and 2.2:1.8.1.0.2:2 with 10% of SrSO$_4$ were studied. For tube fabrication the optimum range of melt temperatures and preheating temperature and time for mold were 105$0^{\circ}C$~110$0^{\circ}C$ and 55$0^{\circ}C$ for 30min respectively. The mold rotating speed was 1000rpm. Typical tube dimension was 30/24mm in outside/inside diameter and 60mm in length. A tube was annealed at 84$0^{\circ}C$ for 40 hours in oxygen atmosphere. The plate like grains more than 20${\mu}{\textrm}{m}$ were well developed along the rotating direction of mold regardless of initial chemical compositions. The specimen with Bi2212 composition exhibited $T_c$ of 83K while the specimen with other compositions are lower than 60K. The measured $I_c and J_c$ at 77K(B = 0T) in Bi2212 composition were about 80A and 266A/$\textrm{cm}^2$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.432-441
• /
• 2008

In this study, the control performance of a Tuned Liquid Mass Damper(TLMD) manufactured to reduce the orthogonal bi-directional responses of building structures was experimentally evaluated. the TLMD using only one control device reduce bi-directional responses of building structures by making the TLMD behave as TMD and TLCD to the strong and weak axial direction of building structures. first, the control performance was evaluated by forcing sinusoidal waves to a test model that the TLMD is installed on the scale-downed building structure. Second, the real-time hybrid shaking table test was performed to evaluate the performance of the vibration control system made up of numerical part as a scale-downed building structural model and a physical experimental part as a TLMD. the superiority of bi-directional vibration control performance of the manufactured TLMD was verified by comparing the uncontrolled and controlled results of these tests.

• Applied Science and Convergence Technology
• /
• 제26권1호
• /
• pp.11-15
• /
• 2017

To improve the adhesion of Mo thin film as a back contact material, a DC magnetron sputtering system was used to deposit in the form of a bi-layer on soda-lime glass. Films with low resistivity and good adhesion were obtained from this deposition, even though the two qualities were found be hard to obtain at the same time. The best Mo bi-layer showed a resistivity of $8.13{\times}10^{-4}{\Omega}{\cdot}cm$ at $500^{\circ}C$ and $3.0{\times}10^{-3}\;Torr$. The XRD measurements showed that the crystallites of the films were mainly oriented in the (110) direction, the FE-SEM images revealed that the resistivity of the Mo films decreased with increasing substrate temperature, which temperature reduction is accompanied by an increase of the grain size. These experimental results were analyzed using the Fuchs-Sondheimer theory. Our Mo bi-layer film with better crystallinity and lower resistivity can be suitably used as a back-contact layer for CIGS solar cells.