• Journal of Mushroom
• /
• v.11 no.2
• /
• pp.53-62
• /
• 2013

A total of 35 phosphate solubilizing bacterial strains were isolated from waste mushroom bed of Agaricus bisporus in Buyeo-Gun, Chungnam and screened for the production of indole acetic acid (IAA). The best IAA producing strain was identified as Pantoea rodasii using 16S rRNA analysis. In addition to the IAA production, this strain could act as an efficient phosphate solubilizer (1100 ${\mu}g$ $ml^{-1}$ after 5 days of incubation) also. The selected strain was cultured under different conditions in order to assess the optimum conditions for maximum IAA production. The nutrient broth (NB) medium was recorded as the best medium, where the maximum IAA production (229 ${\mu}g$ $ml^{-1}$) was recorded at the start of stationary phase (12 hours after inoculation) of the bacteria growth. The performance of the strain was found to be maximum at the temperature of $30^{\circ}C$ followed by $25^{\circ}C$. IAA production was found to be increased with increasing tryptophan concentration (from 0.1 to 0.6%), however beyond this limit, a slight reduction in IAA production was observed. The strains' ability to produce IAA was further confirmed by extraction of crude IAA and subsequent TLC analysis. A specific spot from the extracted IAA preparation was found corresponding with the standard spot of IAA with same $R_f$ value. The results of HPLC analysis conducted in identifying and quantifying the IAA production more precisely, are in agreement with the results of the assessment done with colorimetric method. As revealed by the results of the pot experiment, the isolated strain could significantly enhance the growth (as measured by shoot and root growth) of mung bean plants compared to that of non-inoculated plants. Therefore it can be concluded that the present strain, Pantoea rodasii has great potential to be used as bio-inoculants.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.361-365
• /
• 2013

To investigate factors determining peach fruit quality, chlorophyll content by leaf positions, chlorophyll content of foliated leaf, change of leaf area, and photosynthetic capacity were monitored. Photosynthetic rate in response to radiation intensity and $CO_2$ concentration, and change of sucrose content after shading treatment also were investigated. Chlorophyll content was similar in $5-12^{th}$ leaves after 10 days of foliation, while young $13-16^{th}$ leaves showed lower chlorophyll contents. Chlorophyll content was 2.56 ${\mu}g/cm^2$ on May $28^{th}$, just after foliation, and rapidly increased up to 6.35 ${\mu}g/cm^2$ on June $12^{th}$. After this point, chlorophyll content gradually increased during two months showing the highest value of 9.03 ${\mu}g/cm^2$ on August $14^{th}$. Leaf area was 27.1 $cm^2$ just after foliation and 37.7 $cm^2$ on $10^{th}$ day of foliation increasing 10.6 $cm^2$ during 10 days. Leaf area slowly increased by 3.9 $cm^2$ during next one month. Photosynthetic capacity increased rapidly until the $30^{th}$ day of foliation showing the highest capacity of 13.8 ${\mu}mol/m^{-2}/sec^{-1}$. After this point, photosynthetic capacity decreased sharply. Photosynthetic rate in response to radiation intensity increased rapidly until the PPFD reached to 600 ${\mu}mol/m^{-2}/sec^{-1}$ and increased gradually from 600 ${\mu}mol/m^{-2}/sec^{-1}$ to 1200 ${\mu}mol/m^{-2}/sec^{-1}$ of PPFD and stayed stable beyond this point. Photosynthetic rate in response to $CO_2$ concentration increased until 600 ppm of $CO_2$. At higher $CO_2$ concentration, photosynthetic rate stayed stable or decreased. Sucrose content in leaves was not significantly different between control and shading group until one hour of shading treatment while decreased in shading group after two hours of treatment.

• Clinical and Experimental Pediatrics
• /
• v.48 no.7
• /
• pp.711-715
• /
• 2005

Purpose : With the recent improved survival of extremely low birth weight infants(ELBWI), enteral feeding has become a major issue. This study investigates the effects of early enteral feeding in ELBWI on their morbidity, duration of hospitalization, and mortality. Methods : ELBWI admitted to the neonatal intensive care unit at Samsung Medical Center from November 1994 to April 2004 who survived more than 14 days were enrolled. ELBWI were divided into two groups : an early feeding group(EF), in which enteral feeding was started within 3 days after birth; and a late feeding group(LF), in which enteral feeding was started beyond 3 days after birth. 80 ELBWI came under EF, and 131 ELBWI under LF. Results : Birth weight and gestational age did not differ between the two groups. In EF, the time to achieve full enteral feeding and the duration of parenteral nutrition were significantly shorter than in LF. The incidence of bronchopulmonary dysplasia was significantly lower in EF, but the incidences of sepsis, necrotizing enterocolitis, and cholestasis were not different between the two groups. There was no difference in the survival rate between the two groups, but the duration of hospitalization was significantly shorter in EF. Conclusion : Early enteral feeding in ELBWI did not increase the incidence of necrotizing enterocolitis and sepsis, but rather decreased the incidence of bronchopulmonary dysplasia and shortened the duration of hospitalization.

• KSBB Journal
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1995

A lot of water soluble proteins and lipids are released from minced mackerel meat and lost into the washing waste during the leaching process of Kamaboko or surimi manufacture. The removed proteins and lipids are not only an edible things but also a big burden for treating the wastewater. In order to recover the proteins from the effluent and to use as food stuff, the "pH-shifting" treatment, a modified isoelectric point precipitation method, was tried. This method is based on a myogen-aggregation phenomenon, which occurs when a solution of sarcoplasmic proteins is acidified or alkalified beyond the critical pH zone of 2∼3 or 12∼13 respectively and then neutralized. The maximum amount of precipitation was obtained by shifting the pH of the wastewater from original pH to isoelectric point (pH 4) or alkali pH 12 and then changing to neutral pH. The precipitates were easily collected by filteration or centrifuging at 10,000rpm. The oils which were only floating in the washing wastewater are easily recovered by seperating with oil separator after pouring. The recovered proteins were slightly denaturated during this pH shifting precipitation process, while the composition of amino acids was good balance as a food.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.77-83
• /
• 2011

In this thesis, 50W Doherty amplifier was designed and implemented for Beyond 3G's repeater and base-station. Auxiliary amplifier of doherty amplifier was implemented by Gate bias control circuit. Though gate bias control circuit solved auxiliary's bias problem, output characteristics of doherty amplifier was limited. To enhance the output characteristic relativize Drain control circuit And To improve power efficiency make 3-way Doherty power amplifier. therefore, 3-way GDCD (Gate and Drain bias Control Doherty) power amplifier is embodied to drain bias circuit for General Doherty power amplifier. The 3-way GDCD power amplifier composed of matching circuit with chip capacitor and micro strip line using FR4 dielectric substance of specific inductive capacity(${\varepsilon}r$) 4.6, dielectric substance height(H) 30 Mills, and 2.68 Mills(2 oz) of copper plate thickness(T). Experiment result satisfied specification of amplifier with gains are 57.03 dB in 2.11 ~ 2.17 GHz, 3GPP frequency band, PEP output is 50.30 dBm, W-CDMA average power is 47.01 dBm, and ACLR characteristics at 5MHz offset frequency band station is -40.45 dBc. Especially, 3-way DCHD power amplifier showed excellence efficiency performance improvement in same ACLR than general doherty power amplifier.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.5
• /
• pp.455-463
• /
• 1985

Thermal-denaturation of myofibrillar protein of dorsal skeletal muscle from file fish was investigated by measuring denaturation constant($K_D$) and thermodynamic parameters at various temperatures. The protective effects of sucrose, sorbitol and amino acids when added individually or combined were also discussed. The denaturation rate as reflected in inactivation of myofibrillar protein Ca-ATPase was followed the first order reaction. The $K_D$ values at $25^{\circ}C,\;30^{\circ}C,\;and\;35^{\circ}C$ were $19.52{\times}10^{-5},\;112.25{\times}10^{-5},\;and\;247.20{\times}10^{-5}$, respectively. The activation energy of the reaction at $30^{\circ}C$ was 43 kcal/mole. The protective effects of sucrose, sorbitol, glycine, alanine and Na-glutamate were increased with the concentration but the effects of sorbitol and Na-glutamate decreased beyond 1.0 mole. Basic amino acids such as arginine and lysine did not revealed any protective effect on the thermal denaturation. In case of mixed addition, the effects of Na-glutamate to glycine, sorbitol to glycine, and sorbitol to sucrose or sorbitol to Na-glutamate were enhanced 1.2 to 7.0 times as much as that of control (ratio of mixing; 1:1, range of concentration; 0.5 to 1.25 mole). Under the frozen condition at $-20^{\circ}C$, two mixtures such as Na-glutamate to glycine and sorbitol to sucrose apparently revealed the protective effects.

• Applied Biological Chemistry
• /
• v.19 no.4
• /
• pp.219-226
• /
• 1976

To meet the need of protein feed and fine more efficient ways of returning waste to resources, we have carried out the study of the production of yeast for foods and feeds from the corn starch cake. The present study includes the method for acid-hydrolysis, the selection of yeast capable of utilizing hydrolyzate of the corn starch cake, and culture condition of Candida tropicalis under the liquid culture and the semisolid culture. Obtained results were as follows. 1. Hydrochloric acid was more excellent on the hydrolysis of the corn starch cake than sulfuric acid, and the yield of sugar was maximum, 57.2%, when the corn starch cake was hydrolyzed with 1.0% of hydrochloric acid at 2.0kg/cm for 30 minutes. 2. As the acid solution content was increased, more sugar was liberatedfrom the mixture, until the acid solution-substrate ratio reached 10:1. Beyond this point, no further increase was observed. To prepare the cultural medium of semisolid fermentation, a acid solution to substrate ratio of 3:1 appeared to be optimum. 3. Out of 6 yeast strains, Candida tropicalis had excellent growth on the hydrolyzate of the corn starch cake, and optimum temperature and initial pH were $30^{\circ}C$ and 6.0 respectively. 4. Optimum liquid medium of Candida tropicalis is ures 0.3%, potassium phosphate monobasic 0.15g and magnesium sulfate 0.04g in 100ml of the hydrolyzate of the corn starch cake, while optimum semisolid medium is ammonium chloride 0.4g, potassium phosphate monobasic 0.1%, magnesium sulfate 0.04%. 5. Candida tropicalis could assimilate the sugar in the hydrolyzate up to more than 88.75%, and a yield of dry yeast reached 19.13% to the corn starch cake under the liquid culture. 6. Compared to the that of the untreated corn starch cake, the cellulose content of the semisolid fermented cake decreased by 3.76% to 14.7%, whereas dry yeast contents increased by 13.89%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.90-96
• /
• 2000

The composition of leachates varies depending on the waste characteristics, landfill age and landfilling method. Generally, leachates contain high dissolved organic substance and ammonia nitrogen whereas phosphorus concentration was very low. Leachate A produced from young landfill is characterized by high BOD5/COD ratio (0.8) whereas leachate C produced from old landfill has lower BOD5/COD ratio (0.1). Maximum biochemical methane potential of leachate A, B (from medium landfill) and C were 271,106 and 4 ml CH4/g-COD, respectively. On the other hand, the maximum biodegradability of leachate A, B, and C were 75,30, and 1%, respectively. These results indicated that anaerobic treatment of leachate from young landfill was effective in removing organic pollutants. In case of leachate C, carbon might reside in the form of large molecular weight organic compounds such as lignins, humic acids and other polymerized compounds of soils, which are resistant to biodegradation. The lag-phase period increased with the increasing organic concentration in leachate. In case of leachate A of concentration greater than 25%, the lag-phase period increased sharply. This implied that the start-up period of anaerobic process using an unacclimated inoculum could be extended due to the higher concentration of leachate. This relatively long lag-phase is probably related to the fact that most of the inhibitory compounds have been diluted beyond their inhibitory concentrations of less than 50%. Furthermore, the ultimate methane yield and methane production rate decreased as leachate concentration increased. It was anticipated the potential inhibition was related with the steady-state inhibition as well as the initial shock load.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.