• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.720-726
• /
• 2001

Two-dimensional, angle-resolved LDV(Laser Doppler Velocimetry) measurements of the turbulent rotating flow field in a confined cylinder have been performed. The configurations of interest are flows between a rotating upper disk with a rod attached by a disk or impeller(${\theta}= 90^{\circ},\;45^{\circ}$) and a stationary lower disk in a confined cylinder. The mean flow velocity as well as the turbulent intensity of the flow field have been measured. The results show that the flow is strongly dependent on the position of the impellers or the disk, negligibly affected by the Reynolds number in turbulent flow. It is observed that the mixing effect of the axial flow impeller(${\theta}= 45^{\circ}$) is better than that of the radial flow impeller(${\theta}= 90^{\circ}$) or a disk.

• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.241-248
• /
• 2005

기존의 예측 방법들은 과거의 통계적인 수치를 사용해서 미래를 예측했었다. 정확하게 농산물 가격을 예측하려면 정확한 지식과 많은 노력이 필요하다. 그러므로 이러한 문제점을 해결하기 위해서, 본 논문에서는 농산물 예측 가격을 향상하기 위해서 전처리로 퍼지 및 신경망을 사용하였다. 또한 후처리로써 예기치 못한 상황을 실시간으로 예측할 수 있는 지능형 농사 전문가시스템을 개발하였다. 시뮬레이션결과 제안된 농산물 가격 예측이 퍼지 규칙을 사용하지 않은 기존 수요예측 시스템보다 가격오차를 줄일 수 있음을 입증했다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.596-700
• /
• 1998

Nowadays, with increasing many vehicles on restricted roads, the conventional traffic light creates prove startup-delaytime and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, 30∼45% of conventional traffic cycle is not matched to the present traffic cycle. In this paper proposes electrosensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which doesn't consider vehicle length.

• Journal of Applied Biological Chemistry
• /
• 제49권4호
• /
• pp.176-179
• /
• 2006

Electron beam irradiation was applied to examine the microbial growth and qualities of vacuum-packaged Astragalus membranaceus, a Korean medicinal herb. Samples were irradiated at dose of 2, 4, 8, 12, and 16 kGy, respectively. Microbiological data on A. membranaceus showed that populations of total bacteria, yeast and mold, total coliforms were significantly reduced with increase of irradiation dose. Populations of microorganisms in A. membranaceus were decreased by 2-3 log cycles at 8 kGy irradiation. Color measurements showed that electron beam treatment caused negligible changes in Hunter color L, a, and b values of A. membranaceus. Sensory evaluations showed that there were no significant changes among the samples. These results suggest that electron beam irradiated A. membranaceus have better microbial safety and qualities, compared with the non-irradiated control.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.685-687
• /
• 2010

오프라인으로 학원 및 과외등을 통해서만 제공되던 강의는 웹의 발달로 인해 점점 온라인을 통한 교육으로 이동하고 있는 추세다. 이러한 웹 강의를 편리하게 이용하기 위해 RSS(Really Simple Syndication)기술을 이용하여 편리하고 쉽게 필요한 정보만을 추출하여 강의를 제공함으로써 학생은 더욱 편하게 강의 컨텐츠를 이용할 수 있고 강의자는 1:1채팅을 통해 학생과 친밀감을 높이는 것은 물론 강의를 더욱 잘 이해할 수 있게 도움으로써 획기적인 강의 방식을 제공하는 것에 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.27-28
• /
• 2010

본 연구는 변형경화형 시멘트 복합체를 사용한 접합부의 거동에 관한 논문으로, 주요 변수는 시멘트 복합체의 종류( 무수축 몰탈, 하이브리드 SHCC) 및 보강근의 유무이다. 실험결과, 동일한 배근상세에서 SHCC 실험체가 무수축 몰탈 실험체에 비해 전체적으로 성능이 향상된 것으로 나타났다.

• 한국환경교육학회지:환경교육
• /
• 제25권2호
• /
• pp.149-160
• /
• 2012

This study examined the effects of reflective writing activities utilizing environmental related mass media. Two classes participated as an experimental group (n=31) and a control group (n=30). Both groups of students learned five different topics on environment, such as diversity of ecosystem, global warming, desertification, reduction of the amount of carbon, and eco-friendly behavior. The experimental group students was taught utilizing mass media about each topic and had opportunities of reflective writing about each topic, while the control group of students was taught through lectures. The results indicated that students in the experimental group represented significantly better scores on environmental worldview, environmental sensitivity, and eco-friendly behavior compared to the control group students (p<.01).

• Preventive Nutrition and Food Science
• /
• 제11권4호
• /
• pp.344-347
• /
• 2006

This study evaluated the use of electron beam irradiation for decontamination of the Korean medicinal herb, Angelica gigas Nakai. Herb samples were irradiated at doses of 2, 8, and 16 kGy, respectively. Populations of microorganisms in Angelica gigas Nakai decreased by 2$\sim$3 log cycles at 8 kGy irradiation. Electron beam irradiation caused negligible changes in Hunter color L, a, and b values. Sensory evaluations of Angelica gigas Nakai confirmed that irradiation caused no significant changes in the organoleptic properties of the samples. These results suggest that electron beam-irradiated herbs retain a better microbial safety and sensory qualities, compared with the non-irradiated.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.140-148
• /
• 2004

Fault detection and isolation(FDI) and reconfigurable flight control system provide better survivability even though actuator faults occur. In this study, a new fault detection and isolation algorithm is proposed using fuzzy logic. When the FDI system detects the actuator fault, the fuzzy logic investigates the state variables to find which actuator has fault. Proposed fuzzy detection algorithm detect not only a single fault but also multiple faults. After detecting the fault, the reconfigurable flight control system begins operating for compensating the effects of the fault. A numerical simulation using six degree-of-freedom nonlinear aircraft model is performed to verity the performance of the proposed fault detection and isolation scheme.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.942-949
• /
• 2006

A lumped model is proposed to predict liquid ejection characteristics of a thermally driven inkjet print head. The model is based on a two-dimensional heat conduction equation, an empirical pressure-temperature equation and a nonlinear hydraulic flow-pressure equation. It has been simulated through the construction of an equivalent R-C circuit, and subsequently analyzed using SIMULINK and a circuit simulation tool, PLECS. Using the model, heating and cooling characteristics of the head are predicted to be in agreement with the IR temperature measurements. The effects of the head geometry on the drop ejection are also analyzed using the nonlinear hydraulic model. The present model can be used as a design tool for a better design of thermal inkjet print heads.