• 한국의류학회지
• /
• 제21권7호
• /
• pp.1173-1183
• /
• 1997

In order to flatter the figures of average middle aged women by determining harmonious proportions for their costume forms, this study evaluates effects of varying design details of jackets(coats) with blouses and slacks using a ranking test and paired comparisons test. The result from clothing design C-2 which has the best design effect were as follows; 1. In order to look taller, the jacket(coats) is divided vertical long line and it has the emphasis point close to the face. 2. In order to make shoulder width look wider, armhole seam line attached 1-2 cm from the shoulder point. 3. In order to make chest width look slimmer, division was made up of a tailored collar with a deep V-neckline. 4. In order to make waist circumference look slimmer, the jacket has more fitted waist line than loosed it and tailored collar with a deep V-neckline. 5. In the case of the division of upper and lower garments, when the division was closer to the golden section, i.e., when the jacket hemline is hipline and slacks length is the heel excluded length of shoe heels, the overall appearance was better. 6. The V-neckline looked better, when it was cut along a long acute angle to the waist line. Because of dividing along above factors 1-6 i.e., clothing design C-2 was overall harmonious. Appropriate division of costume forms made for an aesthetic composition, which flattered the body types of middle aged women and presented harmonious, beautiful costume design effects. It made the women look taller, slim and balanced, and highlighted middle aged women's sense of beauty.

• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.215-221
• /
• 2012

본 논문에서는 추적-회피 게임에서 추적자의 추적성능을 향상시키기 위한 최적화 기법을 소개한다. 제한된 공간상에서 추적자는 도망자를 빠른 시간 내에 찾아내고 잡기 위해 확률맵을 생성하고 그 확률정보를 토대로 탐색한다. 추적자는 기존 global-max와 local-max의 장점을 취한 hybrid 추적방식을 사용하는데 이 추적방식은 global-max와 local-max 성향을 조절하는 가중치를 갖는다. 따라서 상황별 최적의 가중치를 찾기 위해 에피소드 매개변수 최적화 알고리즘을 제안하였다. 이 알고리즘은 가중치에 대한 다수의 추적-회피 게임 에피소드를 반복적으로 수행하는 동안 강화학습을 통해 보상을 누적한 후 해당 가중치의 평균보상을 최대화 하는 방향으로 황금분할법을 사용하여 최적의 가중치를 찾는다. 이 최적화 기법을 이용하여 여러 상황별 최적 추적정책을 찾기 위해 도망자 수와 공간의 크기를 변화시켜가며 각각 최적화를 수행하였고 그 결과를 분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2173-2178
• /
• 2008

Railroad is the major factor of vibration source in railway vehicles, and it must carefully maintained the original condition to secure the safety and good ride comfort of passenger. Measuring the condition of rail irregularities such as surface, alignment, gauge, twist and cant etc is required to maintain the good performance of railroad. Currently, the various rail irregularity measurement systems(EM120, ROGER1000K and the Total Rail Irregularity Measurement system of Korea High Speed Train) are operated in Korea to estimate the rail irregularity. It is hard to verify the correlation of one rail irregularity data of a measurement system with the other, because they have been adopted different rail irregularity estimation methods. The best method securing the reliability of the irregularity data is the direct confirmation on the ground where the measurement system had detected as a fault section, but it is impossible to apply all sections simultaneously due to limitation of time, labor, cost and equipments. There is a method to secure the reliability of the data by using acceleration values. Rail irregularities, the major factor of vibration in railway vehicle, are transmitted to the vehicle acceleration through masses, springs, dampers and joints as the system dynamic formation. In this study, Transition Function has been adopted by using the rail irregularity and the acceleration value regarding as input & output parameters respectively. It has been verified by comparing the analyzed results with real measured irregularity data from the Total Rail Irregularity Measurement system of Korea High Speed Train. Also various methods has been accomplished to verify the correlation between rail irregularities and acceleration values.

• 설비공학논문집
• /
• 제16권9호
• /
• pp.828-837
• /
• 2004

The present study investigated two-phase flow distribution, phase separation and pressure drop in multi-microchannel tubes under adiabatic condition. The test section consisted of inlet and outlet headers with the inner diameter of 19.4㎜ and 15 parallel microchannel tubes. Each microchannel tube brazed to the inlet and outlet headers and had 8 rectangular ports with the hydraulic diameter of 1.32㎜. The key experimental parameters were orientation of header (horizontal and vertical), flow direction of refrigerant into the inlet header (in-line, parallel and cross flow) and inlet quality (0.1, 0.2 and 0.3). It was found that the orientation of the header had relatively large effect on the flow distribution and phase separation, while the inlet quality didn't affect much on them. The horizontal header showed the better flow distribution and phase separation characteristics than the vertical one. The parallel flow condition with the horizontal header showed the best performance for the flow distribution and phase separation characteristics under the test conditions. Two-phase pressure drops through the microchannel tubes with the horizontal header were higher than those of the microchennel tubes with the vertical header due to gravitational effect.

• 멤브레인
• /
• 제14권1호
• /
• pp.57-65
• /
• 2004

PDMS (polydimethylsiloxane) 복합막을 통한 기체분리 공정에서 다공성 지지체의 투과저항과 PDMS 코팅두께가 에틸렌/질소의 분리성능(투과도, 선택도)에 미치는 영향에 관하여 조사하였다. 이를 위해 Pinnau 등이 제시한 복합막 투과저항 모델이론식〔1〕이 사용되었다. 지지체의 투과도 또는 투과저항은 PES (polyethersulfone)/NMP(N-methyl-2-pyrrolidone) 고분자 용액의 농도를 변화시키면서 조절하였다. 복합막은 PES 지지체 위에 n-hexane에 녹인 2액형 PDMS 용액을 spin coater를 사용해 코팅하여 제조하였다. 선택층의 코팅 두께는 spin coater의 회전속도를 통해 조절하였다. 투과기체 분리특성은 단일기체 투과도 측정 장치를 통해 조사하였으며, 지지체 및 복합막의 단면구조 및 코팅두께는 SEM (scanning electron microscope)을 통하여 확인하였다 얻어진 실험결과는 복합막의 투과저항모델의 이론식과 매우 잘 일치함을 확인 할 수 있었다. 에틸렌/질소의 분리에 있어 PDMS 막 고유의 선택도를 얻기 위해서는 지지체의 투과저항과 코팅층의 최적화가 중요함을 확인하였다.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• 대한치과의사협회지
• /
• 제47권3호
• /
• pp.156-161
• /
• 2009

The purpose of this study was to survey a preference to the esthetic profile between Korean women and Korean American women. The interviewee were consisted of 30 Korean women and 30 Korean American women respectively. The survey has been done by using questionnaire. Altered facial profile of each normal male and female was got by moving maxilla, mandible to the front and back to survey the preference among the various profile. Then results were analyzed by SPSS program. The results were as follows, 1. In Korean women, in choosing the men's profile, 9 people out of 30, picked the standard profile as a most preferred profile, and bimaxillary retrusion and bimaxillary protrusion profile were followed by 6 people and 5people respectively. 2. In Korean American women, in choosing the men's profile, the 18 people out of 30, pick the bimaxillary retruded profile as a most preferred profile, and the standard profile were followed. 3. In Korean women, in choosing the women's profile, 18 people out of 30, picked the bimaxillary retruded profile as a most beautiful profile, and standard profile were followed by having 10people's voting. 4. In Korean American women, in choosing the women's profile, the 14 people out of 30, chose the bimaxillary retruded profile as a best one and the standard profile were followed by 12 people's voting. The preference of men's profile was significantly different between two groups (p<0.05) but the both group picked the bimaxillary retruded profile as a most beautiful when they choose the women's profile and then there was no statistical difference between the groups.

• KSBB Journal
• /
• 제10권4호
• /
• pp.468-474
• /
• 1995

Glucose biosensor용 glucose oxidase 고정화 막의 단일화 벚 일회용의 간편화를 위한 연구로서, glucose oxidase의 고정화 대상막으로는 CTA와 PCL의 촌합비율이 80/20인 혼합막을 사용한 고저화 방법 중에서는 glutaraldehyde one-steD 방법으로 효소고정화층의 건조 전 두께가 $10{\mu}m$ 인 효소고정화 막이 효과적이었다. 이 고정화 막을 천자현미쇠 으로 관찰해 본 결과, 고밀도의 CTA/PCL 막층 위에 GOD-glutaraldehyde 층이 건조 후 $3{\mu}m$ 정도로 덮여 있는 것을 알 수 있었다. Dissolved oxygen전극을 사용하여 glucose농도의 증가에 따른 전류세기의 차이 값을 측정해 본 결과, glucose 7mM의 안도범위 내에서 선형성을 나타냈으므로 이 고정화원이 glucose sensor용 효소고정화 방법으로 가장 적합하였다. 한편, tyrosmase는 CTA와PCL의 혼 합비율이 80/20인 혼합막에 direct CDI 방법으로 고정화한 것이 가장 효과적이었으며, 8일 후에도고 정화된 tyrosmase의 활성이 35% 이상 유지되었다.

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.389-393
• /
• 2008

The purpose of this study is to provide beauticians with the fundamental material for them to use effectively heat permanent wave and satisfy their customers. It carried out an experiment with hair of a woman in her late twenties to investigate the change of physical and morphologic characteristics by its water content when performing heat permanent wave. It evaluated the water content as 0g, 1g, 2g, 3g and 4g respectively when performing the heat permanent wave on hair, then it compared and observed the wave type, tensile strength and elongation for its physical change also observed the morphologic change by scanning electronic microscope and transmission electronic microscope. The result of experiment on the physical specificity revealed that the wave was the most ideal when the water content was 2 g. The material with much water content made wave but the result was not satisfied. In the case of hair with water content of nearly 0g didn't make wave. In terms of tensile strength and elongation, the tensile strength was generally reduced as hair was damaged, on the contrary, the elongation was increased. It observed the change of morphologic characteristic and got the result that the damage on hair cuticle was deepen as its water content was decreased. It also showed the result that damage happened on hair cuticle more than hair cortex with the observation of fine structure on hair section by transmission electronic microscope. Generally chemical treatment damaged hair. Under consideration of this aspect, the ultimate goal of this thesis is to minimize the damage of hair caused by chemical treatment and get the satisfaction on the hair style. The result of experiment presented that the hair showed the best result when its water content was 2 g.

• Advances in Traditional Medicine
• /
• 제9권2호
• /
• pp.174-181
• /
• 2009

Pterocarpus marsupium, Clitoria ternatea, and Sanseveiria cylindrica are some of the important and endangered medicinal plant species of India. Despite of medicinal properties, antibacterial potential of the plants have not yet been explored. The present study was designed to optimize the in vitro technique for micropropagation and to screen the extracts from leaves and in vitro raised calli for antibacterial properties. Excised leaf-explants from the parent plants were surface sterilized and cultivated on Murashige & Skoog's (MS) medium containing $N^6$-benzyladenine (BA) in concentrations of 1, 2, 5, and $10{\mu}M$. Optimal growth of calli was noticed at a concentration of $5{\mu}M$, therefore the extracts from calli grown at this concentration were further studied for antibacterial activity. Both alcoholic and aqueous extracts from leaves of respective plants, and their in vitro raised calli were tested for antibacterial activity by agar well diffusion method against a range of Gram-positive and Gram-negative bacteria. Aqueous extracts showed antibacterial activity against limited number of bacterial species; notably the extracts of C. ternatea which showed antibacterial activity against Streptococcus pyogenes, Bacillus subtilis and Bacillus cereus. Alcoholic extracts of all three plants showed antibacterial activity against a wider range of bacteria. Among the Gram-positive bacteria, extracts from C. ternatea showed strong antibacterial activity against Bacillus spp., whereas the extracts of S. cylindrica showed good antibacterial potential for Staphylococcus aureus, S. epidermidis and S. pyogenes. The extracts from all three plants showed antibacterial activity against Gram-negative bacteria, including, Salmonella spp. and Shigella dysenteriae; organisms causing enteric fever and dysentery. In most of the cases, the extracts from respective calli showed comparable, and in some cases better, result in comparison to the extracts from parent leaves. To the best of our knowledge this is the first preliminary report on antibacterial potential, especially through calli extracts, of these plants; and in vitro cultivation of the explants may be used to obtain phytotherapeutic compounds.