• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.321-328
• /
• 2008

Software Test Bench should be simulated with maximum quality to real execution environment in order to verify the performance of software which is changed or newly developed. And especially faults detection and recovery are crucial function of the performance test environment. Simulated Software Test Bench based on processor emulator is attractive and can be available prior to hardware Software Test Bench if real time performance aspect is ignored. In this paper, the results of conceptual study for developing the simulated Software Test Bench are presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.593-599
• /
• 2013

In this study, a test-bench for developing and verifying a 1- or 2-axis nanopositioner was manufactured. Using this test-bench, adesigned and manufactured flexure stage based on an analysis can configure nanopositioning systems. A breadboard and fixture were fabricated to be equipped with various types of mechanisms and sizes of stages. The test-bench has linear encoders for calibrating sensors and verifying the orthogonality and parasitic motion of 2-axis nested-type nanopositioners. The controller was developed using LabVIEW and a TI microcontroller. A case study that exemplified the test bench for developing a nanopositioner by senior undergraduate students is shown.

• Korean Journal of Exercise Nutrition
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2019

[Purpose] To date, there have been no studies on the response of wrist tremor to increased muscle activity during exercise. This study aimed to evaluate the wrist tremor response with increasing muscle activity during bench press exercise. [Methods] Triceps muscle activity and wrist tremor response were measured by electromyography and an accelerometer, respectively, during bench press exercise in 11 healthy men without weight-training experience. Subjects performed bench press at 30% repetition maximum (RM), and the rating of perceived exertion (RPE) and lactate concentration were measured before and after exercise. One week later, an equivalent number of bench presses at 30% RM was performed without weight load as a control trial (CT). [Results] RPEs and lactate concentrations significantly increased after resistance exercise (30% RM) from 7.4 to 14.3 and 1.7 to 4.9, respectively (P<.01), but no such difference was observed in the CT. Muscle activity linearly increased during the 30% RM exercise, and wrist tremors were shown to linearly decrease. A strong negative correlation was observed between the two variables (r=-0.88, P<.001). [Conclusion] We found that wrist tremors during resistance exercise, as measured using an accelerometer, can be used to predict muscle activity.

• Journal of Software Assessment and Valuation
• /
• v.15 no.1
• /
• pp.43-53
• /
• 2019

BigCloneBench has recently been used for performance evaluation of code clone detection tool using machine learning. However, since BigCloneBench is not a benchmark that is optimized for machine learning, incorrect learning data can be created. In this paper, we have shown through experiments using machine learning that the set of Type-4 clone methods provided by BigCloneBench can additionally be found. Experimental results using Tree-Based Convolutional Neural Network show that our proposed method is effective in improving BigCloneBench's dataset.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.678-683
• /
• 2016

The study aim was to investigate a comparison of muscle activity fatigue between maximal and submaximal strength gains during the bench press in men. It was hypothesized that maximal voluntary contraction (%MVC) would similar gains between maximal and submaximal strength gains during the bench press, but median frequency (MDF) would increase in maximal compared with submaximal exercise. Employing a randomized, counterbalanced crossover design, 12 men were asked to perform maximal repetitions and submaximal repetitions (concentric: 1-s, eccentric: 1-s, 2-s/repetition) to failure with a load of 85% of 1RM for the bench press, with a 3-minute recovery between the sets. Each subject was tested for the number of repetitions and sets, total work in bench press. Surface electromyography (EMG) was recorded from the pectoralis major, deltoid anterior, and triceps brachii for %MVC and MDF. Total work was significantly higher in the submaximal repetition exercise than that the maximal repetition exercise (p<.05). Muscle fatigue of pectoralis major, deltoid anterior and triceps brachii were significantly smaller in the submaximnal repetition exercise than that the maximal repetition exercise (p<.05, respectively). However, muscle activity of pectoralis major, deltoid anterior, and triceps brachii were not significantly different between exercises. Our study showed that a smaller muscle fatigue in submaximal repetitions, despite higher in total work and a similar in muscle activity were observed. These results suggest that submaximal repetitions during the bench press would be enhanced intensity and/or volume compared with maximal repetitions exercise.

• Explosives and Blasting
• /
• v.14 no.4
• /
• pp.40-48
• /
• 1996

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.166-174
• /
• 2008

Recently, the automotive industry has been developing rapidly. With the progress parts of the automobile components need high quality and the reliability. Among them, braking unit is essential device, and acquire the reliability through the performance test of brake. This study was aimed to design the performance-test-bench to measure the drag torque which has effect on caliper in braking unit. In this progressive technology, it is vital importance to use hydraulic and pneumatic, and to combine test bench with instrumentation engineering technology. This system to construct the design of hydraulic and pneumatic circuit, interface technique between sensors and personal computer, data acquisition and display design, and integrated control are very important technology. Moreover, reliable data are obtained through vacuum system and hydraulic and pneumatic system by using of booster and brake master cylinder which are actually applied to automobile. Then, data signal detector sensors for speed, pressure and torque is attached on this system. Therefore, in this study, we designed a performance-test-bench by and we also made an total control system using personal computer which is more progressive and flexible method than existing PLC control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1263-1268
• /
• 2014

In this study, the variations of swirl center according to evaluating position have been investigated in a steady flow bench of SI engine. For the experiments, two engine heads with different intake valve angles ($11^{\circ}$ and $26^{\circ}$) were tested in the flow bench by varying the evaluating position (1.75~6.0B) and valve lift (2~10 mm). Particle image velocimetry was used to measure the velocity field inside the engine cylinder. The swirl center position is found with a critical point theory and the intensity of turbulence is calculated from PIV velocity data. The results show that the center of swirl is located closer to the center of cylinder and turbulence intensity is lower, when the intake valve angle is the smaller. It is conventional to evaluate the swirl ratio at 1.75B position in the steady flow bench of SI engine. At this position, however, the distance of swirl center from the cylinder center scatters significantly for the variation of valve lift, and the turbulence intensity is much stronger regardless of the valve angle. Thus, to estimate the flow at the end of compression stroke in a real engine from the data in the steady flow experiments, the evaluation position should be moved further downstream more than 4.5B.

• Archives of design research
• /
• v.14 no.2
• /
• pp.137-146
• /
• 2001

In this paper it is investigated that the visual elements of preference which influence the visual preference for bench. "What color of bench is preferred when the location is the same\ulcorner" Started from those questions, the elements of preference which influence the visual preference for bench is investigated. In this research, a equal standard mark system is applied for the evaluation of visual elements of preference and then the relationship between the visual preference and the elements of preference are examined by the method of multiple regression analysis. The result of primary factor analysis from the visual evaluation in this paper will affect visual preference of the bench in urban park. Thus, the result of this study will contribute to development of urban parks for the maximum satisfaction of park visitors supplying necessary information for a resting place planning and design. It will provide a useful management guide of urban park facilities to prepare a strategic management plan of the benches from the users point of view. Especially, to know the correct preference of people, which will be provided by the evaluation of visual preference to bench will be the key to rest place planning.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.41-46
• /
• 2017

A new test bench for small multi-rotor type drones has been developed. Six degrees of freedom (DOF) motion is possible due to a ball bushing, wheels, and rotating plates. An FPGA (field programmable gate array) based controller, that supports realtime parallel processing, is used to measure attitude with an accelerometer and a gyro to adjust motor speed. Several tests were performed to check the operational properties of the test bench and the controller. The results show that this test bench is proper for verifying controllers and the control methods of small multi-rotor drones.